Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 410 insertions, 0 deletions

diff --git a/Documentation/crypto/userspace-if.rst b/Documentation/crypto/userspace-if.rst
new file mode 100644
index 000000000..f80f243e2
--- /dev/null
+++ b/Documentation/crypto/userspace-if.rst
@@ -0,0 +1,410 @@
+User Space Interface
+====================
+
+Introduction
+------------
+
+The concepts of the kernel crypto API visible to kernel space is fully
+applicable to the user space interface as well. Therefore, the kernel
+crypto API high level discussion for the in-kernel use cases applies
+here as well.
+
+The major difference, however, is that user space can only act as a
+consumer and never as a provider of a transformation or cipher
+algorithm.
+
+The following covers the user space interface exported by the kernel
+crypto API. A working example of this description is libkcapi that can
+be obtained from [1]. That library can be used by user space
+applications that require cryptographic services from the kernel.
+
+Some details of the in-kernel kernel crypto API aspects do not apply to
+user space, however. This includes the difference between synchronous
+and asynchronous invocations. The user space API call is fully
+synchronous.
+
+[1] https://www.chronox.de/libkcapi.html
+
+User Space API General Remarks
+------------------------------
+
+The kernel crypto API is accessible from user space. Currently, the
+following ciphers are accessible:
+
+-  Message digest including keyed message digest (HMAC, CMAC)
+
+-  Symmetric ciphers
+
+-  AEAD ciphers
+
+-  Random Number Generators
+
+The interface is provided via socket type using the type AF_ALG. In
+addition, the setsockopt option type is SOL_ALG. In case the user space
+header files do not export these flags yet, use the following macros:
+
+::
+
+    #ifndef AF_ALG
+    #define AF_ALG 38
+    #endif
+    #ifndef SOL_ALG
+    #define SOL_ALG 279
+    #endif
+
+
+A cipher is accessed with the same name as done for the in-kernel API
+calls. This includes the generic vs. unique naming schema for ciphers as
+well as the enforcement of priorities for generic names.
+
+To interact with the kernel crypto API, a socket must be created by the
+user space application. User space invokes the cipher operation with the
+send()/write() system call family. The result of the cipher operation is
+obtained with the read()/recv() system call family.
+
+The following API calls assume that the socket descriptor is already
+opened by the user space application and discusses only the kernel
+crypto API specific invocations.
+
+To initialize the socket interface, the following sequence has to be
+performed by the consumer:
+
+1. Create a socket of type AF_ALG with the struct sockaddr_alg
+   parameter specified below for the different cipher types.
+
+2. Invoke bind with the socket descriptor
+
+3. Invoke accept with the socket descriptor. The accept system call
+   returns a new file descriptor that is to be used to interact with the
+   particular cipher instance. When invoking send/write or recv/read
+   system calls to send data to the kernel or obtain data from the
+   kernel, the file descriptor returned by accept must be used.
+
+In-place Cipher operation
+-------------------------
+
+Just like the in-kernel operation of the kernel crypto API, the user
+space interface allows the cipher operation in-place. That means that
+the input buffer used for the send/write system call and the output
+buffer used by the read/recv system call may be one and the same. This
+is of particular interest for symmetric cipher operations where a
+copying of the output data to its final destination can be avoided.
+
+If a consumer on the other hand wants to maintain the plaintext and the
+ciphertext in different memory locations, all a consumer needs to do is
+to provide different memory pointers for the encryption and decryption
+operation.
+
+Message Digest API
+------------------
+
+The message digest type to be used for the cipher operation is selected
+when invoking the bind syscall. bind requires the caller to provide a
+filled struct sockaddr data structure. This data structure must be
+filled as follows:
+
+::
+
+    struct sockaddr_alg sa = {
+        .salg_family = AF_ALG,
+        .salg_type = "hash", /* this selects the hash logic in the kernel */
+        .salg_name = "sha1" /* this is the cipher name */
+    };
+
+
+The salg_type value "hash" applies to message digests and keyed message
+digests. Though, a keyed message digest is referenced by the appropriate
+salg_name. Please see below for the setsockopt interface that explains
+how the key can be set for a keyed message digest.
+
+Using the send() system call, the application provides the data that
+should be processed with the message digest. The send system call allows
+the following flags to be specified:
+
+-  MSG_MORE: If this flag is set, the send system call acts like a
+   message digest update function where the final hash is not yet
+   calculated. If the flag is not set, the send system call calculates
+   the final message digest immediately.
+
+With the recv() system call, the application can read the message digest
+from the kernel crypto API. If the buffer is too small for the message
+digest, the flag MSG_TRUNC is set by the kernel.
+
+In order to set a message digest key, the calling application must use
+the setsockopt() option of ALG_SET_KEY or ALG_SET_KEY_BY_KEY_SERIAL. If the
+key is not set the HMAC operation is performed without the initial HMAC state
+change caused by the key.
+
+Symmetric Cipher API
+--------------------
+
+The operation is very similar to the message digest discussion. During
+initialization, the struct sockaddr data structure must be filled as
+follows:
+
+::
+
+    struct sockaddr_alg sa = {
+        .salg_family = AF_ALG,
+        .salg_type = "skcipher", /* this selects the symmetric cipher */
+        .salg_name = "cbc(aes)" /* this is the cipher name */
+    };
+
+
+Before data can be sent to the kernel using the write/send system call
+family, the consumer must set the key. The key setting is described with
+the setsockopt invocation below.
+
+Using the sendmsg() system call, the application provides the data that
+should be processed for encryption or decryption. In addition, the IV is
+specified with the data structure provided by the sendmsg() system call.
+
+The sendmsg system call parameter of struct msghdr is embedded into the
+struct cmsghdr data structure. See recv(2) and cmsg(3) for more
+information on how the cmsghdr data structure is used together with the
+send/recv system call family. That cmsghdr data structure holds the
+following information specified with a separate header instances:
+
+-  specification of the cipher operation type with one of these flags:
+
+   -  ALG_OP_ENCRYPT - encryption of data
+
+   -  ALG_OP_DECRYPT - decryption of data
+
+-  specification of the IV information marked with the flag ALG_SET_IV
+
+The send system call family allows the following flag to be specified:
+
+-  MSG_MORE: If this flag is set, the send system call acts like a
+   cipher update function where more input data is expected with a
+   subsequent invocation of the send system call.
+
+Note: The kernel reports -EINVAL for any unexpected data. The caller
+must make sure that all data matches the constraints given in
+/proc/crypto for the selected cipher.
+
+With the recv() system call, the application can read the result of the
+cipher operation from the kernel crypto API. The output buffer must be
+at least as large as to hold all blocks of the encrypted or decrypted
+data. If the output data size is smaller, only as many blocks are
+returned that fit into that output buffer size.
+
+AEAD Cipher API
+---------------
+
+The operation is very similar to the symmetric cipher discussion. During
+initialization, the struct sockaddr data structure must be filled as
+follows:
+
+::
+
+    struct sockaddr_alg sa = {
+        .salg_family = AF_ALG,
+        .salg_type = "aead", /* this selects the symmetric cipher */
+        .salg_name = "gcm(aes)" /* this is the cipher name */
+    };
+
+
+Before data can be sent to the kernel using the write/send system call
+family, the consumer must set the key. The key setting is described with
+the setsockopt invocation below.
+
+In addition, before data can be sent to the kernel using the write/send
+system call family, the consumer must set the authentication tag size.
+To set the authentication tag size, the caller must use the setsockopt
+invocation described below.
+
+Using the sendmsg() system call, the application provides the data that
+should be processed for encryption or decryption. In addition, the IV is
+specified with the data structure provided by the sendmsg() system call.
+
+The sendmsg system call parameter of struct msghdr is embedded into the
+struct cmsghdr data structure. See recv(2) and cmsg(3) for more
+information on how the cmsghdr data structure is used together with the
+send/recv system call family. That cmsghdr data structure holds the
+following information specified with a separate header instances:
+
+-  specification of the cipher operation type with one of these flags:
+
+   -  ALG_OP_ENCRYPT - encryption of data
+
+   -  ALG_OP_DECRYPT - decryption of data
+
+-  specification of the IV information marked with the flag ALG_SET_IV
+
+-  specification of the associated authentication data (AAD) with the
+   flag ALG_SET_AEAD_ASSOCLEN. The AAD is sent to the kernel together
+   with the plaintext / ciphertext. See below for the memory structure.
+
+The send system call family allows the following flag to be specified:
+
+-  MSG_MORE: If this flag is set, the send system call acts like a
+   cipher update function where more input data is expected with a
+   subsequent invocation of the send system call.
+
+Note: The kernel reports -EINVAL for any unexpected data. The caller
+must make sure that all data matches the constraints given in
+/proc/crypto for the selected cipher.
+
+With the recv() system call, the application can read the result of the
+cipher operation from the kernel crypto API. The output buffer must be
+at least as large as defined with the memory structure below. If the
+output data size is smaller, the cipher operation is not performed.
+
+The authenticated decryption operation may indicate an integrity error.
+Such breach in integrity is marked with the -EBADMSG error code.
+
+AEAD Memory Structure
+~~~~~~~~~~~~~~~~~~~~~
+
+The AEAD cipher operates with the following information that is
+communicated between user and kernel space as one data stream:
+
+-  plaintext or ciphertext
+
+-  associated authentication data (AAD)
+
+-  authentication tag
+
+The sizes of the AAD and the authentication tag are provided with the
+sendmsg and setsockopt calls (see there). As the kernel knows the size
+of the entire data stream, the kernel is now able to calculate the right
+offsets of the data components in the data stream.
+
+The user space caller must arrange the aforementioned information in the
+following order:
+
+-  AEAD encryption input: AAD \|\| plaintext
+
+-  AEAD decryption input: AAD \|\| ciphertext \|\| authentication tag
+
+The output buffer the user space caller provides must be at least as
+large to hold the following data:
+
+-  AEAD encryption output: ciphertext \|\| authentication tag
+
+-  AEAD decryption output: plaintext
+
+Random Number Generator API
+---------------------------
+
+Again, the operation is very similar to the other APIs. During
+initialization, the struct sockaddr data structure must be filled as
+follows:
+
+::
+
+    struct sockaddr_alg sa = {
+        .salg_family = AF_ALG,
+        .salg_type = "rng", /* this selects the random number generator */
+        .salg_name = "drbg_nopr_sha256" /* this is the RNG name */
+    };
+
+
+Depending on the RNG type, the RNG must be seeded. The seed is provided
+using the setsockopt interface to set the key. For example, the
+ansi_cprng requires a seed. The DRBGs do not require a seed, but may be
+seeded. The seed is also known as a *Personalization String* in NIST SP 800-90A
+standard.
+
+Using the read()/recvmsg() system calls, random numbers can be obtained.
+The kernel generates at most 128 bytes in one call. If user space
+requires more data, multiple calls to read()/recvmsg() must be made.
+
+WARNING: The user space caller may invoke the initially mentioned accept
+system call multiple times. In this case, the returned file descriptors
+have the same state.
+
+Following CAVP testing interfaces are enabled when kernel is built with
+CRYPTO_USER_API_RNG_CAVP option:
+
+-  the concatenation of *Entropy* and *Nonce* can be provided to the RNG via
+   ALG_SET_DRBG_ENTROPY setsockopt interface. Setting the entropy requires
+   CAP_SYS_ADMIN permission.
+
+-  *Additional Data* can be provided using the send()/sendmsg() system calls,
+   but only after the entropy has been set.
+
+Zero-Copy Interface
+-------------------
+
+In addition to the send/write/read/recv system call family, the AF_ALG
+interface can be accessed with the zero-copy interface of
+splice/vmsplice. As the name indicates, the kernel tries to avoid a copy
+operation into kernel space.
+
+The zero-copy operation requires data to be aligned at the page
+boundary. Non-aligned data can be used as well, but may require more
+operations of the kernel which would defeat the speed gains obtained
+from the zero-copy interface.
+
+The system-inherent limit for the size of one zero-copy operation is 16
+pages. If more data is to be sent to AF_ALG, user space must slice the
+input into segments with a maximum size of 16 pages.
+
+Zero-copy can be used with the following code example (a complete
+working example is provided with libkcapi):
+
+::
+
+    int pipes[2];
+
+    pipe(pipes);
+    /* input data in iov */
+    vmsplice(pipes[1], iov, iovlen, SPLICE_F_GIFT);
+    /* opfd is the file descriptor returned from accept() system call */
+    splice(pipes[0], NULL, opfd, NULL, ret, 0);
+    read(opfd, out, outlen);
+
+
+Setsockopt Interface
+--------------------
+
+In addition to the read/recv and send/write system call handling to send
+and retrieve data subject to the cipher operation, a consumer also needs
+to set the additional information for the cipher operation. This
+additional information is set using the setsockopt system call that must
+be invoked with the file descriptor of the open cipher (i.e. the file
+descriptor returned by the accept system call).
+
+Each setsockopt invocation must use the level SOL_ALG.
+
+The setsockopt interface allows setting the following data using the
+mentioned optname:
+
+-  ALG_SET_KEY -- Setting the key. Key setting is applicable to:
+
+   -  the skcipher cipher type (symmetric ciphers)
+
+   -  the hash cipher type (keyed message digests)
+
+   -  the AEAD cipher type
+
+   -  the RNG cipher type to provide the seed
+
+- ALG_SET_KEY_BY_KEY_SERIAL -- Setting the key via keyring key_serial_t.
+   This operation behaves the same as ALG_SET_KEY. The decrypted
+   data is copied from a keyring key, and uses that data as the
+   key for symmetric encryption.
+
+   The passed in key_serial_t must have the KEY_(POS|USR|GRP|OTH)_SEARCH
+   permission set, otherwise -EPERM is returned. Supports key types: user,
+   logon, encrypted, and trusted.
+
+-  ALG_SET_AEAD_AUTHSIZE -- Setting the authentication tag size for
+   AEAD ciphers. For a encryption operation, the authentication tag of
+   the given size will be generated. For a decryption operation, the
+   provided ciphertext is assumed to contain an authentication tag of
+   the given size (see section about AEAD memory layout below).
+
+-  ALG_SET_DRBG_ENTROPY -- Setting the entropy of the random number generator.
+   This option is applicable to RNG cipher type only.
+
+User space API example
+----------------------
+
+Please see [1] for libkcapi which provides an easy-to-use wrapper around
+the aforementioned Netlink kernel interface. [1] also contains a test
+application that invokes all libkcapi API calls.
+
+[1] https://www.chronox.de/libkcapi.html