Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 417 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
new file mode 100644
index 000000000..5ad147d26
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.yaml
@@ -0,0 +1,417 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,iproc-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc Family Clocks
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description: |
+  The iProc clock controller manages clocks that are common to the iProc family.
+  An SoC from the iProc family may have several PLLs, e.g., ARMPLL, GENPLL,
+  LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL
+  comprises of several leaf clocks
+
+  ASIU clocks are a special case. These clocks are derived directly from the
+  reference clock of the onboard crystal.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm63138-armpll
+      - brcm,cygnus-armpll
+      - brcm,cygnus-genpll
+      - brcm,cygnus-lcpll0
+      - brcm,cygnus-mipipll
+      - brcm,cygnus-asiu-clk
+      - brcm,cygnus-audiopll
+      - brcm,hr2-armpll
+      - brcm,nsp-armpll
+      - brcm,nsp-genpll
+      - brcm,nsp-lcpll0
+      - brcm,ns2-genpll-scr
+      - brcm,ns2-genpll-sw
+      - brcm,ns2-lcpll-ddr
+      - brcm,ns2-lcpll-ports
+      - brcm,sr-genpll0
+      - brcm,sr-genpll1
+      - brcm,sr-genpll2
+      - brcm,sr-genpll3
+      - brcm,sr-genpll4
+      - brcm,sr-genpll5
+      - brcm,sr-genpll6
+      - brcm,sr-lcpll0
+      - brcm,sr-lcpll1
+      - brcm,sr-lcpll-pcie
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: power register
+      - description: ASIU or split status register
+
+  clocks:
+    description: The input parent clock phandle for the PLL / ASIU clock. For
+      most iProc PLLs, this is an onboard crystal with a fixed rate.
+    maxItems: 1
+
+  '#clock-cells':
+    true
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 45
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,nsp-armpll
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+    else:
+      properties:
+        '#clock-cells':
+          const: 1
+      required:
+        - clock-output-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,cygnus-armpll
+              - brcm,cygnus-genpll
+              - brcm,cygnus-lcpll0
+              - brcm,cygnus-mipipll
+              - brcm,cygnus-asiu-clk
+              - brcm,cygnus-audiopll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Cygnus.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-cygnus.h"
+
+            Clock      	Source (Parent)	Index	ID
+            -----	---------------	-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            keypad	crystal (ASIU)	0	BCM_CYGNUS_ASIU_KEYPAD_CLK
+            adc/tsc	crystal (ASIU)	1	BCM_CYGNUS_ASIU_ADC_CLK
+            pwm	crystal (ASIU)		2	BCM_CYGNUS_ASIU_PWM_CLK
+
+            genpll	crystal		0	BCM_CYGNUS_GENPLL
+            axi21	genpll		1	BCM_CYGNUS_GENPLL_AXI21_CLK
+            250mhz	genpll		2	BCM_CYGNUS_GENPLL_250MHZ_CLK
+            ihost_sys	genpll		3	BCM_CYGNUS_GENPLL_IHOST_SYS_CLK
+            enet_sw	genpll		4	BCM_CYGNUS_GENPLL_ENET_SW_CLK
+            audio_125	genpll		5	BCM_CYGNUS_GENPLL_AUDIO_125_CLK
+            can		genpll		6	BCM_CYGNUS_GENPLL_CAN_CLK
+
+            lcpll0	crystal		0	BCM_CYGNUS_LCPLL0
+            pcie_phy	lcpll0		1	BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK
+            ddr_phy	lcpll0		2	BCM_CYGNUS_LCPLL0_DDR_PHY_CLK
+            sdio	lcpll0		3	BCM_CYGNUS_LCPLL0_SDIO_CLK
+            usb_phy	lcpll0		4	BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK
+            smart_card	lcpll0		5	BCM_CYGNUS_LCPLL0_SMART_CARD_CLK
+            ch5_unused	lcpll0		6	BCM_CYGNUS_LCPLL0_CH5_UNUSED
+
+            mipipll	crystal		0	BCM_CYGNUS_MIPIPLL
+            ch0_unused	mipipll		1	BCM_CYGNUS_MIPIPLL_CH0_UNUSED
+            ch1_lcd	mipipll		2	BCM_CYGNUS_MIPIPLL_CH1_LCD
+            ch2_v3d	mipipll		3	BCM_CYGNUS_MIPIPLL_CH2_V3D
+            ch3_unused	mipipll		4	BCM_CYGNUS_MIPIPLL_CH3_UNUSED
+            ch4_unused	mipipll		5	BCM_CYGNUS_MIPIPLL_CH4_UNUSED
+            ch5_unused	mipipll		6	BCM_CYGNUS_MIPIPLL_CH5_UNUSED
+
+            audiopll	crystal		0	BCM_CYGNUS_AUDIOPLL
+            ch0_audio	audiopll	1	BCM_CYGNUS_AUDIOPLL_CH0
+            ch1_audio	audiopll	2	BCM_CYGNUS_AUDIOPLL_CH1
+            ch2_audio	audiopll	3	BCM_CYGNUS_AUDIOPLL_CH2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,hr2-armpll
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock for Hurricane 2:
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-armpll
+              - brcm,nsp-genpll
+              - brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar and
+            Northstar Plus.  These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-nsp.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            armpll	crystal		N/A	N/A
+
+            genpll	crystal		0	BCM_NSP_GENPLL
+            phy		genpll		1	BCM_NSP_GENPLL_PHY_CLK
+            ethernetclk	genpll		2	BCM_NSP_GENPLL_ENET_SW_CLK
+            usbclk	genpll		3	BCM_NSP_GENPLL_USB_PHY_REF_CLK
+            iprocfast	genpll		4	BCM_NSP_GENPLL_IPROCFAST_CLK
+            sata1	genpll		5	BCM_NSP_GENPLL_SATA1_CLK
+            sata2	genpll		6	BCM_NSP_GENPLL_SATA2_CLK
+
+            lcpll0	crystal		0	BCM_NSP_LCPLL0
+            pcie_phy	lcpll0		1	BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK
+            sdio	lcpll0		2	BCM_NSP_LCPLL0_SDIO_CLK
+            ddr_phy	lcpll0		3	BCM_NSP_LCPLL0_DDR_PHY_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-genpll-scr
+              - brcm,ns2-genpll-sw
+              - brcm,ns2-lcpll-ddr
+              - brcm,ns2-lcpll-ports
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Northstar 2.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-ns2.h"
+
+            Clock	Source		Index	ID
+            -----	------		-----	--
+            crystal	N/A		N/A	N/A
+
+            genpll_scr	crystal		0	BCM_NS2_GENPLL_SCR
+            scr		genpll_scr	1	BCM_NS2_GENPLL_SCR_SCR_CLK
+            fs		genpll_scr	2	BCM_NS2_GENPLL_SCR_FS_CLK
+            audio_ref	genpll_scr	3	BCM_NS2_GENPLL_SCR_AUDIO_CLK
+            ch3_unused	genpll_scr	4	BCM_NS2_GENPLL_SCR_CH3_UNUSED
+            ch4_unused	genpll_scr	5	BCM_NS2_GENPLL_SCR_CH4_UNUSED
+            ch5_unused	genpll_scr	6	BCM_NS2_GENPLL_SCR_CH5_UNUSED
+
+            genpll_sw	crystal		0	BCM_NS2_GENPLL_SW
+            rpe		genpll_sw	1	BCM_NS2_GENPLL_SW_RPE_CLK
+            250		genpll_sw	2	BCM_NS2_GENPLL_SW_250_CLK
+            nic		genpll_sw	3	BCM_NS2_GENPLL_SW_NIC_CLK
+            chimp	genpll_sw	4	BCM_NS2_GENPLL_SW_CHIMP_CLK
+            port	genpll_sw	5	BCM_NS2_GENPLL_SW_PORT_CLK
+            sdio	genpll_sw	6	BCM_NS2_GENPLL_SW_SDIO_CLK
+
+            lcpll_ddr	crystal		0	BCM_NS2_LCPLL_DDR
+            pcie_sata_usb lcpll_ddr	1	BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK
+            ddr		lcpll_ddr	2	BCM_NS2_LCPLL_DDR_DDR_CLK
+            ch2_unused	lcpll_ddr	3	BCM_NS2_LCPLL_DDR_CH2_UNUSED
+            ch3_unused	lcpll_ddr	4	BCM_NS2_LCPLL_DDR_CH3_UNUSED
+            ch4_unused	lcpll_ddr	5	BCM_NS2_LCPLL_DDR_CH4_UNUSED
+            ch5_unused	lcpll_ddr	6	BCM_NS2_LCPLL_DDR_CH5_UNUSED
+
+            lcpll_ports	crystal		0	BCM_NS2_LCPLL_PORTS
+            wan		lcpll_ports	1	BCM_NS2_LCPLL_PORTS_WAN_CLK
+            rgmii	lcpll_ports	2	BCM_NS2_LCPLL_PORTS_RGMII_CLK
+            ch2_unused	lcpll_ports	3	BCM_NS2_LCPLL_PORTS_CH2_UNUSED
+            ch3_unused	lcpll_ports	4	BCM_NS2_LCPLL_PORTS_CH3_UNUSED
+            ch4_unused	lcpll_ports	5	BCM_NS2_LCPLL_PORTS_CH4_UNUSED
+            ch5_unused	lcpll_ports	6	BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,sr-genpll0
+              - brcm,sr-genpll1
+              - brcm,sr-genpll2
+              - brcm,sr-genpll3
+              - brcm,sr-genpll4
+              - brcm,sr-genpll5
+              - brcm,sr-genpll6
+              - brcm,sr-lcpll0
+              - brcm,sr-lcpll1
+              - brcm,sr-lcpll-pcie
+    then:
+      properties:
+        clock-output-names:
+          description: |
+            The following table defines the set of PLL/clock index and ID for Stingray.
+            These clock IDs are defined in:
+                "include/dt-bindings/clock/bcm-sr.h"
+
+            Clock		Source		Index	ID
+            -----		------		-----	--
+            crystal		N/A		N/A	N/A
+            crmu_ref25m		crystal		N/A	N/A
+
+            genpll0		crystal		0	BCM_SR_GENPLL0
+            clk_125m		genpll0		1	BCM_SR_GENPLL0_125M_CLK
+            clk_scr		genpll0		2	BCM_SR_GENPLL0_SCR_CLK
+            clk_250		genpll0		3	BCM_SR_GENPLL0_250M_CLK
+            clk_pcie_axi	genpll0		4	BCM_SR_GENPLL0_PCIE_AXI_CLK
+            clk_paxc_axi_x2	genpll0		5	BCM_SR_GENPLL0_PAXC_AXI_X2_CLK
+            clk_paxc_axi	genpll0		6	BCM_SR_GENPLL0_PAXC_AXI_CLK
+
+            genpll1		crystal		0	BCM_SR_GENPLL1
+            clk_pcie_tl		genpll1		1	BCM_SR_GENPLL1_PCIE_TL_CLK
+            clk_mhb_apb		genpll1		2	BCM_SR_GENPLL1_MHB_APB_CLK
+
+            genpll2		crystal		0	BCM_SR_GENPLL2
+            clk_nic		genpll2		1	BCM_SR_GENPLL2_NIC_CLK
+            clk_ts_500_ref	genpll2		2	BCM_SR_GENPLL2_TS_500_REF_CLK
+            clk_125_nitro	genpll2		3	BCM_SR_GENPLL2_125_NITRO_CLK
+            clk_chimp		genpll2		4	BCM_SR_GENPLL2_CHIMP_CLK
+            clk_nic_flash	genpll2		5	BCM_SR_GENPLL2_NIC_FLASH_CLK
+            clk_fs		genpll2		6	BCM_SR_GENPLL2_FS_CLK
+
+            genpll3		crystal		0	BCM_SR_GENPLL3
+            clk_hsls		genpll3		1	BCM_SR_GENPLL3_HSLS_CLK
+            clk_sdio		genpll3		2	BCM_SR_GENPLL3_SDIO_CLK
+
+            genpll4		crystal		0	BCM_SR_GENPLL4
+            clk_ccn		genpll4		1	BCM_SR_GENPLL4_CCN_CLK
+            clk_tpiu_pll	genpll4		2	BCM_SR_GENPLL4_TPIU_PLL_CLK
+            clk_noc		genpll4		3	BCM_SR_GENPLL4_NOC_CLK
+            clk_chclk_fs4	genpll4		4	BCM_SR_GENPLL4_CHCLK_FS4_CLK
+            clk_bridge_fscpu	genpll4		5	BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK
+
+            genpll5		crystal		0	BCM_SR_GENPLL5
+            clk_fs4_hf		genpll5		1	BCM_SR_GENPLL5_FS4_HF_CLK
+            clk_crypto_ae	genpll5		2	BCM_SR_GENPLL5_CRYPTO_AE_CLK
+            clk_raid_ae		genpll5		3	BCM_SR_GENPLL5_RAID_AE_CLK
+
+            genpll6		crystal		0	BCM_SR_GENPLL6
+            clk_48_usb		genpll6		1	BCM_SR_GENPLL6_48_USB_CLK
+
+            lcpll0		crystal		0	BCM_SR_LCPLL0
+            clk_sata_refp 	lcpll0		1	BCM_SR_LCPLL0_SATA_REFP_CLK
+            clk_sata_refn	lcpll0		2	BCM_SR_LCPLL0_SATA_REFN_CLK
+            clk_sata_350	lcpll0		3	BCM_SR_LCPLL0_SATA_350_CLK
+            clk_sata_500	lcpll0		4	BCM_SR_LCPLL0_SATA_500_CLK
+
+            lcpll1		crystal		0	BCM_SR_LCPLL1
+            clk_wan		lcpll1		1	BCM_SR_LCPLL1_WAN_CLK
+            clk_usb_ref		lcpll1		2	BCM_SR_LCPLL1_USB_REF_CLK
+            clk_crmu_ts		lcpll1		3	BCM_SR_LCPLL1_CRMU_TS_CLK
+
+            lcpll_pcie		crystal		0	BCM_SR_LCPLL_PCIE
+            clk_pcie_phy_ref	lcpll1		1	BCM_SR_LCPLL_PCIE_PHY_REF_CLK
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,cygnus-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: axi21
+            - const: 250mhz
+            - const: ihost_sys
+            - const: enet_sw
+            - const: audio_125
+            - const: can
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-lcpll0
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: lcpll0
+            - const: pcie_phy
+            - const: sdio
+            - const: ddr_phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,nsp-genpll
+    then:
+      properties:
+        clock-output-names:
+          items:
+            - const: genpll
+            - const: phy
+            - const: ethernetclk
+            - const: usbclk
+            - const: iprocfast
+            - const: sata1
+            - const: sata2
+
+required:
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    osc1: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    genpll@301d000 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-genpll";
+        reg = <0x301d000 0x2c>, <0x301c020 0x4>;
+        clocks = <&os1c>;
+        clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+                     "enet_sw", "audio_125", "can";
+    };
+  - |
+    osc2: oscillator {
+        #clock-cells = <0>;
+        compatible = "fixed-clock";
+        clock-frequency = <25000000>;
+    };
+
+    asiu_clks@301d048 {
+        #clock-cells = <1>;
+        compatible = "brcm,cygnus-asiu-clk";
+        reg = <0x301d048 0xc>, <0x180aa024 0x4>;
+        clocks = <&osc2>;
+        clock-output-names = "keypad", "adc/touch", "pwm";
+    };
+  - |
+    arm_clk@0 {
+        #clock-cells = <0>;
+        compatible = "brcm,nsp-armpll";
+        clocks = <&osc>;
+        reg = <0x0 0x1000>;
+    };