Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 553 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
new file mode 100644
index 000000000..8f359f473
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -0,0 +1,553 @@
+=====================================================================
+SEC 4 Device Tree Binding
+Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+
+ CONTENTS
+   -Overview
+   -SEC 4 Node
+   -Job Ring Node
+   -Run Time Integrity Check (RTIC) Node
+   -Run Time Integrity Check (RTIC) Memory Node
+   -Secure Non-Volatile Storage (SNVS) Node
+   -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+   -Full Example
+
+NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+Accelerator and Assurance Module (CAAM).
+
+=====================================================================
+Overview
+
+DESCRIPTION
+
+SEC 4 h/w can process requests from 2 types of sources.
+1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+2. Job Rings (HW interface between cores & SEC 4 registers).
+
+High Speed Data Path Configuration:
+
+HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+such as the P4080.  The number of simultaneous dequeues the QI can make is
+equal to the number of Descriptor Controller (DECO) engines in a particular
+SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+dequeue from 5 subportals simultaneously.
+
+Job Ring Data Path Configuration:
+
+Each JR is located on a separate 4k page, they may (or may not) be made visible
+in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
+up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+=====================================================================
+SEC 4 Node
+
+Description
+
+    Node defines the base address of the SEC 4 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 4 block.  It
+    also receives interrupts from the Run Time Integrity Check
+    (RTIC) function within the SEC 4 block.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0"
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC4 configuration registers.
+          registers
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 4.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+   - clocks
+      Usage: required if SEC 4.0 requires explicit enablement of clocks
+      Value type: <prop_encoded-array>
+      Definition:  A list of phandle and clock specifier pairs describing
+          the clocks required for enabling and disabling SEC 4.0.
+
+   - clock-names
+      Usage: required if SEC 4.0 requires explicit enablement of clocks
+      Value type: <string>
+      Definition: A list of clock name strings in the same order as the
+          clocks property.
+
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
+
+
+EXAMPLE
+
+iMX6QDL/SX requires four clocks
+
+	crypto@300000 {
+		compatible = "fsl,sec-v4.0";
+		fsl,sec-era = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <92 2>;
+		clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
+			 <&clks IMX6QDL_CLK_CAAM_ACLK>,
+			 <&clks IMX6QDL_CLK_CAAM_IPG>,
+			 <&clks IMX6QDL_CLK_EIM_SLOW>;
+		clock-names = "mem", "aclk", "ipg", "emi_slow";
+	};
+
+
+iMX6UL does only require three clocks
+
+	crypto: crypto@2140000 {
+		compatible = "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2140000 0x3c000>;
+		ranges = <0 0x2140000 0x3c000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
+			 <&clks IMX6UL_CLK_CAAM_ACLK>,
+			 <&clks IMX6UL_CLK_CAAM_IPG>;
+		clock-names = "mem", "aclk", "ipg";
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 4
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-job-ring"
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+          the parent physical address and the length the JR registers.
+
+   - fsl,liodn
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the LIODN to be used in conjunction with
+           the ppid-to-liodn table that specifies the PPID to LIODN mapping.
+           Needed if the PAMU is used.  Value is a 12 bit value
+           where value is a LIODN ID for this JR. This property is
+           normally set by boot firmware.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v4.0-job-ring";
+		reg = <0x1000 0x1000>;
+		fsl,liodn = <0x081>;
+		interrupt-parent = <&mpic>;
+		interrupts = <88 2>;
+	};
+
+
+=====================================================================
+Run Time Integrity Check (RTIC) Node
+
+  Child node of the crypto node.  Defines a register space that
+  contains up to 5 sets of addresses and their lengths (sizes) that
+  will be checked at run time.  After an initial hash result is
+  calculated, these addresses are checked by HW to monitor any
+  change.  If any memory is modified, a Security Violation is
+  triggered (see SNVS definition).
+
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-rtic".
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.  Must
+           have a value of 1.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.  Must have a value of 1.
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies a two parameters:
+          an offset from the parent physical address and the length
+          the SEC4 registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 4 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+EXAMPLE
+	rtic@6000 {
+		compatible = "fsl,sec-v4.0-rtic";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x6000 0x100>;
+		ranges = <0x0 0x6100 0xe00>;
+	};
+
+=====================================================================
+Run Time Integrity Check (RTIC) Memory Node
+  A child node that defines individual RTIC memory regions that are used to
+  perform run-time integrity check of memory areas that should not modified.
+  The node defines a register that contains the memory address &
+  length (combined) and a second register that contains the hash result
+  in big endian format.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-rtic-memory".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies two parameters:
+          an offset from the parent physical address and the length:
+
+          1. The location of the RTIC memory address & length registers.
+          2. The location RTIC hash result.
+
+  - fsl,rtic-region
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the HW address (36 bit address) for this region
+           followed by the length of the HW partition to be checked;
+           the address is represented as a 64 bit quantity followed
+           by a 32 bit length.
+
+   - fsl,liodn
+       Usage: optional-but-recommended
+       Value type: <prop-encoded-array>
+       Definition:
+           Specifies the LIODN to be used in conjunction with
+           the ppid-to-liodn table that specifies the PPID to LIODN
+           mapping.  Needed if the PAMU is used.  Value is a 12 bit value
+           where value is a LIODN ID for this RTIC memory region. This
+           property is normally set by boot firmware.
+
+EXAMPLE
+	rtic-a@0 {
+		compatible = "fsl,sec-v4.0-rtic-memory";
+		reg = <0x00 0x20 0x100 0x80>;
+		fsl,liodn   = <0x03c>;
+		fsl,rtic-region  = <0x12345678 0x12345678 0x12345678>;
+	};
+
+=====================================================================
+Secure Non-Volatile Storage (SNVS) Node
+
+    Node defines address range and the associated
+    interrupt for the SNVS function.  This function
+    monitors security state information & reports
+    security violations. This also included rtc,
+    system power off and ON/OFF key.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC4 configuration
+          registers.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.  Must
+           have a value of 1.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.  Must have a value of 1.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SNVS register space.  A triplet that includes
+           the child address, parent address, & length.
+
+   - interrupts
+      Usage: optional
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	sec_mon@314000 {
+		compatible = "fsl,sec-v4.0-mon", "syscon";
+		reg = <0x314000 0x1000>;
+		ranges = <0 0x314000 0x1000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <93 2>;
+	};
+
+=====================================================================
+Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+
+  A SNVS child node that defines SNVS LP RTC.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
+
+  - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: Specifies the interrupts generated by this
+	   device.  The value of the interrupts property
+	   consists of one interrupt specifier. The format
+	   of the specifier is defined by the binding document
+	   describing the node's interrupt parent.
+
+ - regmap
+	Usage: required
+	Value type: <phandle>
+	Definition: this is phandle to the register map node.
+
+ - offset
+	Usage: option
+	value type: <u32>
+	Definition: LP register offset. default it is 0x34.
+
+   - clocks
+      Usage: optional, required if SNVS LP RTC requires explicit
+          enablement of clocks
+      Value type: <prop_encoded-array>
+      Definition:  a clock specifier describing the clock required for
+          enabling and disabling SNVS LP RTC.
+
+   - clock-names
+      Usage: optional, required if SNVS LP RTC requires explicit
+          enablement of clocks
+      Value type: <string>
+      Definition: clock name string should be "snvs-rtc".
+
+EXAMPLE
+	sec_mon_rtc_lp@1 {
+		compatible = "fsl,sec-v4.0-mon-rtc-lp";
+		interrupts = <93 2>;
+		regmap = <&snvs>;
+		offset = <0x34>;
+		clocks = <&clks IMX7D_SNVS_CLK>;
+		clock-names = "snvs-rtc";
+	};
+
+=====================================================================
+System ON/OFF key driver
+
+  The snvs-pwrkey is designed to enable POWER key function which controlled
+  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+  system if pressed after system suspend.
+
+  - compatible:
+      Usage: required
+      Value type: <string>
+      Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+  - interrupts:
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+  - linux,keycode:
+      Usage: option
+      Value type: <int>
+      Definition: Keycode to emit, KEY_POWER by default.
+
+  - wakeup-source:
+      Usage: option
+      Value type: <boo>
+      Definition: Button can wake-up the system.
+
+ - regmap:
+      Usage: required:
+      Value type: <phandle>
+      Definition: this is phandle to the register map node.
+
+EXAMPLE:
+	snvs-pwrkey@020cc000 {
+		compatible = "fsl,sec-v4.0-pwrkey";
+		regmap = <&snvs>;
+		interrupts = <0 4 0x4>
+	        linux,keycode = <116>; /* KEY_POWER */
+		wakeup-source;
+	};
+
+=====================================================================
+FULL EXAMPLE
+
+	crypto: crypto@300000 {
+		compatible = "fsl,sec-v4.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x300000 0x10000>;
+		ranges = <0 0x300000 0x10000>;
+		interrupt-parent = <&mpic>;
+		interrupts = <92 2>;
+
+		sec_jr0: jr@1000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x1000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <88 2>;
+		};
+
+		sec_jr1: jr@2000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <89 2>;
+		};
+
+		sec_jr2: jr@3000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x3000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <90 2>;
+		};
+
+		sec_jr3: jr@4000 {
+			compatible = "fsl,sec-v4.0-job-ring";
+			reg = <0x4000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <91 2>;
+		};
+
+		rtic@6000 {
+			compatible = "fsl,sec-v4.0-rtic";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x6000 0x100>;
+			ranges = <0x0 0x6100 0xe00>;
+
+			rtic_a: rtic-a@0 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x00 0x20 0x100 0x80>;
+			};
+
+			rtic_b: rtic-b@20 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x20 0x20 0x200 0x80>;
+			};
+
+			rtic_c: rtic-c@40 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x40 0x20 0x300 0x80>;
+			};
+
+			rtic_d: rtic-d@60 {
+				compatible = "fsl,sec-v4.0-rtic-memory";
+				reg = <0x60 0x20 0x500 0x80>;
+			};
+		};
+	};
+
+	sec_mon: sec_mon@314000 {
+		compatible = "fsl,sec-v4.0-mon";
+		reg = <0x314000 0x1000>;
+		ranges = <0 0x314000 0x1000>;
+
+		sec_mon_rtc_lp@34 {
+			compatible = "fsl,sec-v4.0-mon-rtc-lp";
+			regmap = <&sec_mon>;
+			offset = <0x34>;
+			interrupts = <93 2>;
+			clocks = <&clks IMX7D_SNVS_CLK>;
+			clock-names = "snvs-rtc";
+		};
+
+		snvs-pwrkey@020cc000 {
+			compatible = "fsl,sec-v4.0-pwrkey";
+			regmap = <&sec_mon>;
+			interrupts = <0 4 0x4>;
+			linux,keycode = <116>; /* KEY_POWER */
+			wakeup-source;
+		};
+	};
+
+=====================================================================