Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

4 files changed, 605 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
new file mode 100644
index 000000000..98a7dc7f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/allwinner,sun4i-a10-system-control.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 System Control
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+description:
+  The SRAM controller found on most Allwinner devices is represented
+  by a regular node for the SRAM controller itself, with sub-nodes
+  representing the SRAM handled by the SRAM controller.
+
+properties:
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun4i-a10-sram-controller
+          - allwinner,sun50i-a64-sram-controller
+        deprecated: true
+      - enum:
+          - allwinner,sun4i-a10-system-control
+          - allwinner,sun5i-a13-system-control
+          - allwinner,sun8i-a23-system-control
+          - allwinner,sun8i-h3-system-control
+          - allwinner,sun20i-d1-system-control
+          - allwinner,sun50i-a64-system-control
+          - allwinner,sun50i-h5-system-control
+          - allwinner,sun50i-h616-system-control
+      - items:
+          - enum:
+              - allwinner,suniv-f1c100s-system-control
+              - allwinner,sun7i-a20-system-control
+              - allwinner,sun8i-r40-system-control
+          - const: allwinner,sun4i-a10-system-control
+      - items:
+          - const: allwinner,sun8i-v3s-system-control
+          - const: allwinner,sun8i-h3-system-control
+      - items:
+          - const: allwinner,sun50i-h6-system-control
+          - const: allwinner,sun50i-a64-system-control
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  "^sram@[a-z0-9]+":
+    type: object
+
+    properties:
+      compatible:
+        const: mmio-sram
+
+    patternProperties:
+      "^sram-section?@[a-f0-9]+$":
+        type: object
+
+        properties:
+          compatible:
+            oneOf:
+              - const: allwinner,sun4i-a10-sram-a3-a4
+              - const: allwinner,sun4i-a10-sram-c1
+              - const: allwinner,sun4i-a10-sram-d
+              - const: allwinner,sun50i-a64-sram-c
+              - items:
+                  - enum:
+                      - allwinner,sun5i-a13-sram-a3-a4
+                      - allwinner,sun7i-a20-sram-a3-a4
+                  - const: allwinner,sun4i-a10-sram-a3-a4
+              - items:
+                  - enum:
+                      - allwinner,sun5i-a13-sram-c1
+                      - allwinner,sun7i-a20-sram-c1
+                      - allwinner,sun8i-a23-sram-c1
+                      - allwinner,sun8i-h3-sram-c1
+                      - allwinner,sun8i-r40-sram-c1
+                      - allwinner,sun50i-a64-sram-c1
+                      - allwinner,sun50i-h5-sram-c1
+                      - allwinner,sun50i-h6-sram-c1
+                  - const: allwinner,sun4i-a10-sram-c1
+              - items:
+                  - enum:
+                      - allwinner,suniv-f1c100s-sram-d
+                      - allwinner,sun5i-a13-sram-d
+                      - allwinner,sun7i-a20-sram-d
+                  - const: allwinner,sun4i-a10-sram-d
+              - items:
+                  - const: allwinner,sun50i-h6-sram-c
+                  - const: allwinner,sun50i-a64-sram-c
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    system-control@1c00000 {
+      compatible = "allwinner,sun4i-a10-system-control";
+      reg = <0x01c00000 0x30>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      sram_a: sram@0 {
+        compatible = "mmio-sram";
+        reg = <0x00000000 0xc000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00000000 0xc000>;
+
+        emac_sram: sram-section@8000 {
+          compatible = "allwinner,sun4i-a10-sram-a3-a4";
+          reg = <0x8000 0x4000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
new file mode 100644
index 000000000..665c06e14
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/qcom,imem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IMEM memory region
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm IMEM is dedicated memory region for various debug features and DMA
+  transactions.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,apq8064-imem
+          - qcom,msm8974-imem
+          - qcom,qcs404-imem
+          - qcom,sc7180-imem
+          - qcom,sc7280-imem
+          - qcom,sdm630-imem
+          - qcom,sdm845-imem
+          - qcom,sdx55-imem
+          - qcom,sdx65-imem
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  reboot-mode:
+    $ref: /schemas/power/reset/syscon-reboot-mode.yaml#
+
+patternProperties:
+  "^pil-reloc@[0-9a-f]+$":
+    $ref: /schemas/remoteproc/qcom,pil-info.yaml#
+    description: Peripheral image loader relocation region
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@146bf000 {
+            compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
+            reg = <0 0x146bf000 0 0x1000>;
+            ranges = <0 0 0x146bf000 0x1000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            pil-reloc@94c {
+                compatible = "qcom,pil-reloc-info";
+                reg = <0x94c 0xc8>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
new file mode 100644
index 000000000..071f2d676
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/qcom,ocmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On Chip Memory (OCMEM) that is present on some Qualcomm Snapdragon SoCs.
+
+maintainers:
+  - Brian Masney <masneyb@onstation.org>
+
+description: |
+  The On Chip Memory (OCMEM) is typically used by the GPU, camera/video, and
+  audio components on some Snapdragon SoCs.
+
+properties:
+  compatible:
+    const: qcom,msm8974-ocmem
+
+  reg:
+    items:
+      - description: Control registers
+      - description: OCMEM address range
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: mem
+
+  clocks:
+    items:
+      - description: Core clock
+      - description: Interface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties: false
+
+patternProperties:
+  "-sram@[0-9a-f]+$":
+    type: object
+    description: A region of reserved memory.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+
+    sram@fdd00000 {
+        compatible = "qcom,msm8974-ocmem";
+
+        reg = <0xfdd00000 0x2000>,
+              <0xfec00000 0x180000>;
+        reg-names = "ctrl",
+                    "mem";
+
+        clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+                 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+        clock-names = "core",
+                      "iface";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
+
+        gmu-sram@0 {
+            reg = <0x0 0x100000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
new file mode 100644
index 000000000..993430be3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic on-chip SRAM
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  Simple IO memory regions to be managed by the genalloc API.
+
+  Each child of the sram node specifies a region of reserved memory. Each
+  child node should use a 'reg' property to specify a specific range of
+  reserved memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node. Unit address (@<address>) should be
+  appended to the name.
+
+properties:
+  $nodename:
+    pattern: "^sram(@.*)?"
+
+  compatible:
+    contains:
+      enum:
+        - mmio-sram
+        - amlogic,meson-gxbb-sram
+        - arm,juno-sram-ns
+        - atmel,sama5d2-securam
+        - nvidia,tegra186-sysram
+        - nvidia,tegra194-sysram
+        - nvidia,tegra234-sysram
+        - qcom,rpm-msg-ram
+        - rockchip,rk3288-pmu-sram
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      A list of phandle and clock specifier pair that controls the single
+      SRAM clock.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+    description:
+      Should translate from local addresses within the sram to bus addresses.
+
+  no-memory-wc:
+    description:
+      The flag indicating, that SRAM memory region has not to be remapped
+      as write combining. WC is used by default.
+    type: boolean
+
+patternProperties:
+  "^([a-z0-9]*-)?sram(-section)?@[a-f0-9]+$":
+    type: object
+    description:
+      Each child of the sram node specifies a region of reserved memory.
+    properties:
+      compatible:
+        description:
+          Should contain a vendor specific string in the form
+          <vendor>,[<device>-]<usage>
+        contains:
+          enum:
+            - allwinner,sun4i-a10-sram-a3-a4
+            - allwinner,sun4i-a10-sram-c1
+            - allwinner,sun4i-a10-sram-d
+            - allwinner,sun9i-a80-smp-sram
+            - allwinner,sun50i-a64-sram-c
+            - amlogic,meson8-ao-arc-sram
+            - amlogic,meson8b-ao-arc-sram
+            - amlogic,meson8-smp-sram
+            - amlogic,meson8b-smp-sram
+            - amlogic,meson-gxbb-scp-shmem
+            - amlogic,meson-axg-scp-shmem
+            - arm,juno-scp-shmem
+            - arm,scmi-shmem
+            - arm,scp-shmem
+            - renesas,smp-sram
+            - rockchip,rk3066-smp-sram
+            - samsung,exynos4210-sysram
+            - samsung,exynos4210-sysram-ns
+            - socionext,milbeaut-smp-sram
+
+      reg:
+        description:
+          IO mem address range, relative to the SRAM range.
+        maxItems: 1
+
+      pool:
+        description:
+          Indicates that the particular reserved SRAM area is addressable
+          and in use by another device or devices.
+        type: boolean
+
+      export:
+        description:
+          Indicates that the reserved SRAM area may be accessed outside
+          of the kernel, e.g. by bootloader or userspace.
+        type: boolean
+
+      protect-exec:
+        description: |
+          Same as 'pool' above but with the additional constraint that code
+          will be run from the region and that the memory is maintained as
+          read-only, executable during code execution. NOTE: This region must
+          be page aligned on start and end in order to properly allow
+          manipulation of the page attributes.
+        type: boolean
+
+      label:
+        description:
+          The name for the reserved partition, if omitted, the label is taken
+          from the node name excluding the unit address.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - qcom,rpm-msg-ram
+            - rockchip,rk3288-pmu-sram
+then:
+  required:
+    - "#address-cells"
+    - "#size-cells"
+    - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    sram@5c000000 {
+        compatible = "mmio-sram";
+        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5c000000 0x40000>;
+
+        smp-sram@100 {
+            reg = <0x100 0x50>;
+        };
+
+        device-sram@1000 {
+            reg = <0x1000 0x1000>;
+            pool;
+        };
+
+        exported-sram@20000 {
+            reg = <0x20000 0x20000>;
+            export;
+        };
+    };
+
+  - |
+    // Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
+    // of the secondary cores. Once the core gets powered up it executes the
+    // code that is residing at some specific location of the SYSRAM.
+    //
+    // Therefore reserved section sub-nodes have to be added to the mmio-sram
+    // declaration. These nodes are of two types depending upon secure or
+    // non-secure execution environment.
+    sram@2020000 {
+        compatible = "mmio-sram";
+        reg = <0x02020000 0x54000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x02020000 0x54000>;
+
+        smp-sram@0 {
+            compatible = "samsung,exynos4210-sysram";
+            reg = <0x0 0x1000>;
+        };
+
+        smp-sram@53000 {
+            compatible = "samsung,exynos4210-sysram-ns";
+            reg = <0x53000 0x1000>;
+        };
+    };
+
+  - |
+    // Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores.
+    // Once the core gets powered up it executes the code that is residing at a
+    // specific location.
+    //
+    // Therefore a reserved section sub-node has to be added to the mmio-sram
+    // declaration.
+    sram@d9000000 {
+        compatible = "mmio-sram";
+        reg = <0xd9000000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xd9000000 0x20000>;
+
+        smp-sram@1ff80 {
+            compatible = "amlogic,meson8b-smp-sram";
+            reg = <0x1ff80 0x8>;
+        };
+    };
+
+  - |
+    sram@e63c0000 {
+        compatible = "mmio-sram";
+        reg = <0xe63c0000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xe63c0000 0x1000>;
+
+        smp-sram@0 {
+            compatible = "renesas,smp-sram";
+            reg = <0 0x10>;
+        };
+    };
+
+  - |
+    sram@10080000 {
+        compatible = "mmio-sram";
+        reg = <0x10080000 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        smp-sram@10080000 {
+            compatible = "rockchip,rk3066-smp-sram";
+            reg = <0x10080000 0x50>;
+        };
+    };
+
+  - |
+    // Rockchip's rk3288 SoC uses the sram of pmu to store the function of
+    // resume from maskrom(the 1st level loader). This is a common use of
+    // the "pmu-sram" because it keeps power even in low power states
+    // in the system.
+    sram@ff720000 {
+      compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+      reg = <0xff720000 0x1000>;
+    };
+
+  - |
+    // Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
+    // primary core (cpu0). Once the core gets powered up it checks if a magic
+    // value is set at a specific location. If it is then the BROM will jump
+    // to the software entry address, instead of executing a standard boot.
+    //
+    // Also there are no "secure-only" properties. The implementation should
+    // check if this SRAM is usable first.
+    sram@20000 {
+        // 256 KiB secure SRAM at 0x20000
+        compatible = "mmio-sram";
+        reg = <0x00020000 0x40000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x00020000 0x40000>;
+
+        smp-sram@1000 {
+            // This is checked by BROM to determine if
+            // cpu0 should jump to SMP entry vector
+            compatible = "allwinner,sun9i-a80-smp-sram";
+            reg = <0x1000 0x8>;
+        };
+    };
+
+  - |
+    sram@0 {
+        compatible = "mmio-sram";
+        reg = <0x0 0x10000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x10000>;
+
+        smp-sram@f100 {
+            compatible = "socionext,milbeaut-smp-sram";
+            reg = <0xf100 0x20>;
+        };
+    };