Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

4 files changed, 555 insertions, 0 deletions

diff --git a/Documentation/driver-api/md/index.rst b/Documentation/driver-api/md/index.rst
new file mode 100644
index 000000000..18f54a7d7
--- /dev/null
+++ b/Documentation/driver-api/md/index.rst
@@ -0,0 +1,12 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+RAID
+====
+
+.. toctree::
+   :maxdepth: 1
+
+   md-cluster
+   raid5-cache
+   raid5-ppl
diff --git a/Documentation/driver-api/md/md-cluster.rst b/Documentation/driver-api/md/md-cluster.rst
new file mode 100644
index 000000000..96eb52cec
--- /dev/null
+++ b/Documentation/driver-api/md/md-cluster.rst
@@ -0,0 +1,385 @@
+==========
+MD Cluster
+==========
+
+The cluster MD is a shared-device RAID for a cluster, it supports
+two levels: raid1 and raid10 (limited support).
+
+
+1. On-disk format
+=================
+
+Separate write-intent-bitmaps are used for each cluster node.
+The bitmaps record all writes that may have been started on that node,
+and may not yet have finished. The on-disk layout is::
+
+  0                    4k                     8k                    12k
+  -------------------------------------------------------------------
+  | idle                | md super            | bm super [0] + bits |
+  | bm bits[0, contd]   | bm super[1] + bits  | bm bits[1, contd]   |
+  | bm super[2] + bits  | bm bits [2, contd]  | bm super[3] + bits  |
+  | bm bits [3, contd]  |                     |                     |
+
+During "normal" functioning we assume the filesystem ensures that only
+one node writes to any given block at a time, so a write request will
+
+ - set the appropriate bit (if not already set)
+ - commit the write to all mirrors
+ - schedule the bit to be cleared after a timeout.
+
+Reads are just handled normally. It is up to the filesystem to ensure
+one node doesn't read from a location where another node (or the same
+node) is writing.
+
+
+2. DLM Locks for management
+===========================
+
+There are three groups of locks for managing the device:
+
+2.1 Bitmap lock resource (bm_lockres)
+-------------------------------------
+
+ The bm_lockres protects individual node bitmaps. They are named in
+ the form bitmap000 for node 1, bitmap001 for node 2 and so on. When a
+ node joins the cluster, it acquires the lock in PW mode and it stays
+ so during the lifetime the node is part of the cluster. The lock
+ resource number is based on the slot number returned by the DLM
+ subsystem. Since DLM starts node count from one and bitmap slots
+ start from zero, one is subtracted from the DLM slot number to arrive
+ at the bitmap slot number.
+
+ The LVB of the bitmap lock for a particular node records the range
+ of sectors that are being re-synced by that node.  No other
+ node may write to those sectors.  This is used when a new nodes
+ joins the cluster.
+
+2.2 Message passing locks
+-------------------------
+
+ Each node has to communicate with other nodes when starting or ending
+ resync, and for metadata superblock updates.  This communication is
+ managed through three locks: "token", "message", and "ack", together
+ with the Lock Value Block (LVB) of one of the "message" lock.
+
+2.3 new-device management
+-------------------------
+
+ A single lock: "no-new-dev" is used to co-ordinate the addition of
+ new devices - this must be synchronized across the array.
+ Normally all nodes hold a concurrent-read lock on this device.
+
+3. Communication
+================
+
+ Messages can be broadcast to all nodes, and the sender waits for all
+ other nodes to acknowledge the message before proceeding.  Only one
+ message can be processed at a time.
+
+3.1 Message Types
+-----------------
+
+ There are six types of messages which are passed:
+
+3.1.1 METADATA_UPDATED
+^^^^^^^^^^^^^^^^^^^^^^
+
+   informs other nodes that the metadata has
+   been updated, and the node must re-read the md superblock. This is
+   performed synchronously. It is primarily used to signal device
+   failure.
+
+3.1.2 RESYNCING
+^^^^^^^^^^^^^^^
+   informs other nodes that a resync is initiated or
+   ended so that each node may suspend or resume the region.  Each
+   RESYNCING message identifies a range of the devices that the
+   sending node is about to resync. This overrides any previous
+   notification from that node: only one ranged can be resynced at a
+   time per-node.
+
+3.1.3 NEWDISK
+^^^^^^^^^^^^^
+
+   informs other nodes that a device is being added to
+   the array. Message contains an identifier for that device.  See
+   below for further details.
+
+3.1.4 REMOVE
+^^^^^^^^^^^^
+
+   A failed or spare device is being removed from the
+   array. The slot-number of the device is included in the message.
+
+ 3.1.5 RE_ADD:
+
+   A failed device is being re-activated - the assumption
+   is that it has been determined to be working again.
+
+ 3.1.6 BITMAP_NEEDS_SYNC:
+
+   If a node is stopped locally but the bitmap
+   isn't clean, then another node is informed to take the ownership of
+   resync.
+
+3.2 Communication mechanism
+---------------------------
+
+ The DLM LVB is used to communicate within nodes of the cluster. There
+ are three resources used for the purpose:
+
+3.2.1 token
+^^^^^^^^^^^
+   The resource which protects the entire communication
+   system. The node having the token resource is allowed to
+   communicate.
+
+3.2.2 message
+^^^^^^^^^^^^^
+   The lock resource which carries the data to communicate.
+
+3.2.3 ack
+^^^^^^^^^
+
+   The resource, acquiring which means the message has been
+   acknowledged by all nodes in the cluster. The BAST of the resource
+   is used to inform the receiving node that a node wants to
+   communicate.
+
+The algorithm is:
+
+ 1. receive status - all nodes have concurrent-reader lock on "ack"::
+
+	sender                         receiver                 receiver
+	"ack":CR                       "ack":CR                 "ack":CR
+
+ 2. sender get EX on "token",
+    sender get EX on "message"::
+
+	sender                        receiver                 receiver
+	"token":EX                    "ack":CR                 "ack":CR
+	"message":EX
+	"ack":CR
+
+    Sender checks that it still needs to send a message. Messages
+    received or other events that happened while waiting for the
+    "token" may have made this message inappropriate or redundant.
+
+ 3. sender writes LVB
+
+    sender down-convert "message" from EX to CW
+
+    sender try to get EX of "ack"
+
+    ::
+
+      [ wait until all receivers have *processed* the "message" ]
+
+                                       [ triggered by bast of "ack" ]
+                                       receiver get CR on "message"
+                                       receiver read LVB
+                                       receiver processes the message
+                                       [ wait finish ]
+                                       receiver releases "ack"
+                                       receiver tries to get PR on "message"
+
+     sender                         receiver                  receiver
+     "token":EX                     "message":CR              "message":CR
+     "message":CW
+     "ack":EX
+
+ 4. triggered by grant of EX on "ack" (indicating all receivers
+    have processed message)
+
+    sender down-converts "ack" from EX to CR
+
+    sender releases "message"
+
+    sender releases "token"
+
+    ::
+
+                                 receiver upconvert to PR on "message"
+                                 receiver get CR of "ack"
+                                 receiver release "message"
+
+     sender                      receiver                   receiver
+     "ack":CR                    "ack":CR                   "ack":CR
+
+
+4. Handling Failures
+====================
+
+4.1 Node Failure
+----------------
+
+ When a node fails, the DLM informs the cluster with the slot
+ number. The node starts a cluster recovery thread. The cluster
+ recovery thread:
+
+	- acquires the bitmap<number> lock of the failed node
+	- opens the bitmap
+	- reads the bitmap of the failed node
+	- copies the set bitmap to local node
+	- cleans the bitmap of the failed node
+	- releases bitmap<number> lock of the failed node
+	- initiates resync of the bitmap on the current node
+	  md_check_recovery is invoked within recover_bitmaps,
+	  then md_check_recovery -> metadata_update_start/finish,
+	  it will lock the communication by lock_comm.
+	  Which means when one node is resyncing it blocks all
+	  other nodes from writing anywhere on the array.
+
+ The resync process is the regular md resync. However, in a clustered
+ environment when a resync is performed, it needs to tell other nodes
+ of the areas which are suspended. Before a resync starts, the node
+ send out RESYNCING with the (lo,hi) range of the area which needs to
+ be suspended. Each node maintains a suspend_list, which contains the
+ list of ranges which are currently suspended. On receiving RESYNCING,
+ the node adds the range to the suspend_list. Similarly, when the node
+ performing resync finishes, it sends RESYNCING with an empty range to
+ other nodes and other nodes remove the corresponding entry from the
+ suspend_list.
+
+ A helper function, ->area_resyncing() can be used to check if a
+ particular I/O range should be suspended or not.
+
+4.2 Device Failure
+==================
+
+ Device failures are handled and communicated with the metadata update
+ routine.  When a node detects a device failure it does not allow
+ any further writes to that device until the failure has been
+ acknowledged by all other nodes.
+
+5. Adding a new Device
+----------------------
+
+ For adding a new device, it is necessary that all nodes "see" the new
+ device to be added. For this, the following algorithm is used:
+
+   1.  Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
+       ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CLUSTER_ADD)
+   2.  Node 1 sends a NEWDISK message with uuid and slot number
+   3.  Other nodes issue kobject_uevent_env with uuid and slot number
+       (Steps 4,5 could be a udev rule)
+   4.  In userspace, the node searches for the disk, perhaps
+       using blkid -t SUB_UUID=""
+   5.  Other nodes issue either of the following depending on whether
+       the disk was found:
+       ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and
+       disc.number set to slot number)
+       ioctl(CLUSTERED_DISK_NACK)
+   6.  Other nodes drop lock on "no-new-devs" (CR) if device is found
+   7.  Node 1 attempts EX lock on "no-new-dev"
+   8.  If node 1 gets the lock, it sends METADATA_UPDATED after
+       unmarking the disk as SpareLocal
+   9.  If not (get "no-new-dev" lock), it fails the operation and sends
+       METADATA_UPDATED.
+   10. Other nodes get the information whether a disk is added or not
+       by the following METADATA_UPDATED.
+
+6. Module interface
+===================
+
+ There are 17 call-backs which the md core can make to the cluster
+ module.  Understanding these can give a good overview of the whole
+ process.
+
+6.1 join(nodes) and leave()
+---------------------------
+
+ These are called when an array is started with a clustered bitmap,
+ and when the array is stopped.  join() ensures the cluster is
+ available and initializes the various resources.
+ Only the first 'nodes' nodes in the cluster can use the array.
+
+6.2 slot_number()
+-----------------
+
+ Reports the slot number advised by the cluster infrastructure.
+ Range is from 0 to nodes-1.
+
+6.3 resync_info_update()
+------------------------
+
+ This updates the resync range that is stored in the bitmap lock.
+ The starting point is updated as the resync progresses.  The
+ end point is always the end of the array.
+ It does *not* send a RESYNCING message.
+
+6.4 resync_start(), resync_finish()
+-----------------------------------
+
+ These are called when resync/recovery/reshape starts or stops.
+ They update the resyncing range in the bitmap lock and also
+ send a RESYNCING message.  resync_start reports the whole
+ array as resyncing, resync_finish reports none of it.
+
+ resync_finish() also sends a BITMAP_NEEDS_SYNC message which
+ allows some other node to take over.
+
+6.5 metadata_update_start(), metadata_update_finish(), metadata_update_cancel()
+-------------------------------------------------------------------------------
+
+ metadata_update_start is used to get exclusive access to
+ the metadata.  If a change is still needed once that access is
+ gained, metadata_update_finish() will send a METADATA_UPDATE
+ message to all other nodes, otherwise metadata_update_cancel()
+ can be used to release the lock.
+
+6.6 area_resyncing()
+--------------------
+
+ This combines two elements of functionality.
+
+ Firstly, it will check if any node is currently resyncing
+ anything in a given range of sectors.  If any resync is found,
+ then the caller will avoid writing or read-balancing in that
+ range.
+
+ Secondly, while node recovery is happening it reports that
+ all areas are resyncing for READ requests.  This avoids races
+ between the cluster-filesystem and the cluster-RAID handling
+ a node failure.
+
+6.7 add_new_disk_start(), add_new_disk_finish(), new_disk_ack()
+---------------------------------------------------------------
+
+ These are used to manage the new-disk protocol described above.
+ When a new device is added, add_new_disk_start() is called before
+ it is bound to the array and, if that succeeds, add_new_disk_finish()
+ is called the device is fully added.
+
+ When a device is added in acknowledgement to a previous
+ request, or when the device is declared "unavailable",
+ new_disk_ack() is called.
+
+6.8 remove_disk()
+-----------------
+
+ This is called when a spare or failed device is removed from
+ the array.  It causes a REMOVE message to be send to other nodes.
+
+6.9 gather_bitmaps()
+--------------------
+
+ This sends a RE_ADD message to all other nodes and then
+ gathers bitmap information from all bitmaps.  This combined
+ bitmap is then used to recovery the re-added device.
+
+6.10 lock_all_bitmaps() and unlock_all_bitmaps()
+------------------------------------------------
+
+ These are called when change bitmap to none. If a node plans
+ to clear the cluster raid's bitmap, it need to make sure no other
+ nodes are using the raid which is achieved by lock all bitmap
+ locks within the cluster, and also those locks are unlocked
+ accordingly.
+
+7. Unsupported features
+=======================
+
+There are somethings which are not supported by cluster MD yet.
+
+- change array_sectors.
diff --git a/Documentation/driver-api/md/raid5-cache.rst b/Documentation/driver-api/md/raid5-cache.rst
new file mode 100644
index 000000000..d7a15f44a
--- /dev/null
+++ b/Documentation/driver-api/md/raid5-cache.rst
@@ -0,0 +1,111 @@
+================
+RAID 4/5/6 cache
+================
+
+Raid 4/5/6 could include an extra disk for data cache besides normal RAID
+disks. The role of RAID disks isn't changed with the cache disk. The cache disk
+caches data to the RAID disks. The cache can be in write-through (supported
+since 4.4) or write-back mode (supported since 4.10). mdadm (supported since
+3.4) has a new option '--write-journal' to create array with cache. Please
+refer to mdadm manual for details. By default (RAID array starts), the cache is
+in write-through mode. A user can switch it to write-back mode by::
+
+	echo "write-back" > /sys/block/md0/md/journal_mode
+
+And switch it back to write-through mode by::
+
+	echo "write-through" > /sys/block/md0/md/journal_mode
+
+In both modes, all writes to the array will hit cache disk first. This means
+the cache disk must be fast and sustainable.
+
+write-through mode
+==================
+
+This mode mainly fixes the 'write hole' issue. For RAID 4/5/6 array, an unclean
+shutdown can cause data in some stripes to not be in consistent state, eg, data
+and parity don't match. The reason is that a stripe write involves several RAID
+disks and it's possible the writes don't hit all RAID disks yet before the
+unclean shutdown. We call an array degraded if it has inconsistent data. MD
+tries to resync the array to bring it back to normal state. But before the
+resync completes, any system crash will expose the chance of real data
+corruption in the RAID array. This problem is called 'write hole'.
+
+The write-through cache will cache all data on cache disk first. After the data
+is safe on the cache disk, the data will be flushed onto RAID disks. The
+two-step write will guarantee MD can recover correct data after unclean
+shutdown even the array is degraded. Thus the cache can close the 'write hole'.
+
+In write-through mode, MD reports IO completion to upper layer (usually
+filesystems) after the data is safe on RAID disks, so cache disk failure
+doesn't cause data loss. Of course cache disk failure means the array is
+exposed to 'write hole' again.
+
+In write-through mode, the cache disk isn't required to be big. Several
+hundreds megabytes are enough.
+
+write-back mode
+===============
+
+write-back mode fixes the 'write hole' issue too, since all write data is
+cached on cache disk. But the main goal of 'write-back' cache is to speed up
+write. If a write crosses all RAID disks of a stripe, we call it full-stripe
+write. For non-full-stripe writes, MD must read old data before the new parity
+can be calculated. These synchronous reads hurt write throughput. Some writes
+which are sequential but not dispatched in the same time will suffer from this
+overhead too. Write-back cache will aggregate the data and flush the data to
+RAID disks only after the data becomes a full stripe write. This will
+completely avoid the overhead, so it's very helpful for some workloads. A
+typical workload which does sequential write followed by fsync is an example.
+
+In write-back mode, MD reports IO completion to upper layer (usually
+filesystems) right after the data hits cache disk. The data is flushed to raid
+disks later after specific conditions met. So cache disk failure will cause
+data loss.
+
+In write-back mode, MD also caches data in memory. The memory cache includes
+the same data stored on cache disk, so a power loss doesn't cause data loss.
+The memory cache size has performance impact for the array. It's recommended
+the size is big. A user can configure the size by::
+
+	echo "2048" > /sys/block/md0/md/stripe_cache_size
+
+Too small cache disk will make the write aggregation less efficient in this
+mode depending on the workloads. It's recommended to use a cache disk with at
+least several gigabytes size in write-back mode.
+
+The implementation
+==================
+
+The write-through and write-back cache use the same disk format. The cache disk
+is organized as a simple write log. The log consists of 'meta data' and 'data'
+pairs. The meta data describes the data. It also includes checksum and sequence
+ID for recovery identification. Data can be IO data and parity data. Data is
+checksumed too. The checksum is stored in the meta data ahead of the data. The
+checksum is an optimization because MD can write meta and data freely without
+worry about the order. MD superblock has a field pointed to the valid meta data
+of log head.
+
+The log implementation is pretty straightforward. The difficult part is the
+order in which MD writes data to cache disk and RAID disks. Specifically, in
+write-through mode, MD calculates parity for IO data, writes both IO data and
+parity to the log, writes the data and parity to RAID disks after the data and
+parity is settled down in log and finally the IO is finished. Read just reads
+from raid disks as usual.
+
+In write-back mode, MD writes IO data to the log and reports IO completion. The
+data is also fully cached in memory at that time, which means read must query
+memory cache. If some conditions are met, MD will flush the data to RAID disks.
+MD will calculate parity for the data and write parity into the log. After this
+is finished, MD will write both data and parity into RAID disks, then MD can
+release the memory cache. The flush conditions could be stripe becomes a full
+stripe write, free cache disk space is low or free in-kernel memory cache space
+is low.
+
+After an unclean shutdown, MD does recovery. MD reads all meta data and data
+from the log. The sequence ID and checksum will help us detect corrupted meta
+data and data. If MD finds a stripe with data and valid parities (1 parity for
+raid4/5 and 2 for raid6), MD will write the data and parities to RAID disks. If
+parities are incompleted, they are discarded. If part of data is corrupted,
+they are discarded too. MD then loads valid data and writes them to RAID disks
+in normal way.
diff --git a/Documentation/driver-api/md/raid5-ppl.rst b/Documentation/driver-api/md/raid5-ppl.rst
new file mode 100644
index 000000000..357e5515b
--- /dev/null
+++ b/Documentation/driver-api/md/raid5-ppl.rst
@@ -0,0 +1,47 @@
+==================
+Partial Parity Log
+==================
+
+Partial Parity Log (PPL) is a feature available for RAID5 arrays. The issue
+addressed by PPL is that after a dirty shutdown, parity of a particular stripe
+may become inconsistent with data on other member disks. If the array is also
+in degraded state, there is no way to recalculate parity, because one of the
+disks is missing. This can lead to silent data corruption when rebuilding the
+array or using it is as degraded - data calculated from parity for array blocks
+that have not been touched by a write request during the unclean shutdown can
+be incorrect. Such condition is known as the RAID5 Write Hole. Because of
+this, md by default does not allow starting a dirty degraded array.
+
+Partial parity for a write operation is the XOR of stripe data chunks not
+modified by this write. It is just enough data needed for recovering from the
+write hole. XORing partial parity with the modified chunks produces parity for
+the stripe, consistent with its state before the write operation, regardless of
+which chunk writes have completed. If one of the not modified data disks of
+this stripe is missing, this updated parity can be used to recover its
+contents. PPL recovery is also performed when starting an array after an
+unclean shutdown and all disks are available, eliminating the need to resync
+the array. Because of this, using write-intent bitmap and PPL together is not
+supported.
+
+When handling a write request PPL writes partial parity before new data and
+parity are dispatched to disks. PPL is a distributed log - it is stored on
+array member drives in the metadata area, on the parity drive of a particular
+stripe.  It does not require a dedicated journaling drive. Write performance is
+reduced by up to 30%-40% but it scales with the number of drives in the array
+and the journaling drive does not become a bottleneck or a single point of
+failure.
+
+Unlike raid5-cache, the other solution in md for closing the write hole, PPL is
+not a true journal. It does not protect from losing in-flight data, only from
+silent data corruption. If a dirty disk of a stripe is lost, no PPL recovery is
+performed for this stripe (parity is not updated). So it is possible to have
+arbitrary data in the written part of a stripe if that disk is lost. In such
+case the behavior is the same as in plain raid5.
+
+PPL is available for md version-1 metadata and external (specifically IMSM)
+metadata arrays. It can be enabled using mdadm option --consistency-policy=ppl.
+
+There is a limitation of maximum 64 disks in the array for PPL. It allows to
+keep data structures and implementation simple. RAID5 arrays with so many disks
+are not likely due to high risk of multiple disks failure. Such restriction
+should not be a real life limitation.