Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 204 insertions, 0 deletions

diff --git a/Documentation/driver-api/surface_aggregator/clients/cdev.rst b/Documentation/driver-api/surface_aggregator/clients/cdev.rst
new file mode 100644
index 000000000..0134a841a
--- /dev/null
+++ b/Documentation/driver-api/surface_aggregator/clients/cdev.rst
@@ -0,0 +1,204 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+.. |ssam_cdev_request| replace:: :c:type:`struct ssam_cdev_request <ssam_cdev_request>`
+.. |ssam_cdev_request_flags| replace:: :c:type:`enum ssam_cdev_request_flags <ssam_cdev_request_flags>`
+.. |ssam_cdev_event| replace:: :c:type:`struct ssam_cdev_event <ssam_cdev_event>`
+
+==============================
+User-Space EC Interface (cdev)
+==============================
+
+The ``surface_aggregator_cdev`` module provides a misc-device for the SSAM
+controller to allow for a (more or less) direct connection from user-space to
+the SAM EC. It is intended to be used for development and debugging, and
+therefore should not be used or relied upon in any other way. Note that this
+module is not loaded automatically, but instead must be loaded manually.
+
+The provided interface is accessible through the ``/dev/surface/aggregator``
+device-file. All functionality of this interface is provided via IOCTLs.
+These IOCTLs and their respective input/output parameter structs are defined in
+``include/uapi/linux/surface_aggregator/cdev.h``.
+
+A small python library and scripts for accessing this interface can be found
+at https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam.
+
+.. contents::
+
+
+Receiving Events
+================
+
+Events can be received by reading from the device-file. The are represented by
+the |ssam_cdev_event| datatype.
+
+Before events are available to be read, however, the desired notifiers must be
+registered via the ``SSAM_CDEV_NOTIF_REGISTER`` IOCTL. Notifiers are, in
+essence, callbacks, called when the EC sends an event. They are, in this
+interface, associated with a specific target category and device-file-instance.
+They forward any event of this category to the buffer of the corresponding
+instance, from which it can then be read.
+
+Notifiers themselves do not enable events on the EC. Thus, it may additionally
+be necessary to enable events via the ``SSAM_CDEV_EVENT_ENABLE`` IOCTL. While
+notifiers work per-client (i.e. per-device-file-instance), events are enabled
+globally, for the EC and all of its clients (regardless of userspace or
+non-userspace). The ``SSAM_CDEV_EVENT_ENABLE`` and ``SSAM_CDEV_EVENT_DISABLE``
+IOCTLs take care of reference counting the events, such that an event is
+enabled as long as there is a client that has requested it.
+
+Note that enabled events are not automatically disabled once the client
+instance is closed. Therefore any client process (or group of processes) should
+balance their event enable calls with the corresponding event disable calls. It
+is, however, perfectly valid to enable and disable events on different client
+instances. For example, it is valid to set up notifiers and read events on
+client instance ``A``, enable those events on instance ``B`` (note that these
+will also be received by A since events are enabled/disabled globally), and
+after no more events are desired, disable the previously enabled events via
+instance ``C``.
+
+
+Controller IOCTLs
+=================
+
+The following IOCTLs are provided:
+
+.. flat-table:: Controller IOCTLs
+   :widths: 1 1 1 1 4
+   :header-rows: 1
+
+   * - Type
+     - Number
+     - Direction
+     - Name
+     - Description
+
+   * - ``0xA5``
+     - ``1``
+     - ``WR``
+     - ``REQUEST``
+     - Perform synchronous SAM request.
+
+   * - ``0xA5``
+     - ``2``
+     - ``W``
+     - ``NOTIF_REGISTER``
+     - Register event notifier.
+
+   * - ``0xA5``
+     - ``3``
+     - ``W``
+     - ``NOTIF_UNREGISTER``
+     - Unregister event notifier.
+
+   * - ``0xA5``
+     - ``4``
+     - ``W``
+     - ``EVENT_ENABLE``
+     - Enable event source.
+
+   * - ``0xA5``
+     - ``5``
+     - ``W``
+     - ``EVENT_DISABLE``
+     - Disable event source.
+
+
+``SSAM_CDEV_REQUEST``
+---------------------
+
+Defined as ``_IOWR(0xA5, 1, struct ssam_cdev_request)``.
+
+Executes a synchronous SAM request. The request specification is passed in
+as argument of type |ssam_cdev_request|, which is then written to/modified
+by the IOCTL to return status and result of the request.
+
+Request payload data must be allocated separately and is passed in via the
+``payload.data`` and ``payload.length`` members. If a response is required,
+the response buffer must be allocated by the caller and passed in via the
+``response.data`` member. The ``response.length`` member must be set to the
+capacity of this buffer, or if no response is required, zero. Upon
+completion of the request, the call will write the response to the response
+buffer (if its capacity allows it) and overwrite the length field with the
+actual size of the response, in bytes.
+
+Additionally, if the request has a response, this must be indicated via the
+request flags, as is done with in-kernel requests. Request flags can be set
+via the ``flags`` member and the values correspond to the values found in
+|ssam_cdev_request_flags|.
+
+Finally, the status of the request itself is returned in the ``status``
+member (a negative errno value indicating failure). Note that failure
+indication of the IOCTL is separated from failure indication of the request:
+The IOCTL returns a negative status code if anything failed during setup of
+the request (``-EFAULT``) or if the provided argument or any of its fields
+are invalid (``-EINVAL``). In this case, the status value of the request
+argument may be set, providing more detail on what went wrong (e.g.
+``-ENOMEM`` for out-of-memory), but this value may also be zero. The IOCTL
+will return with a zero status code in case the request has been set up,
+submitted, and completed (i.e. handed back to user-space) successfully from
+inside the IOCTL, but the request ``status`` member may still be negative in
+case the actual execution of the request failed after it has been submitted.
+
+A full definition of the argument struct is provided below.
+
+``SSAM_CDEV_NOTIF_REGISTER``
+----------------------------
+
+Defined as ``_IOW(0xA5, 2, struct ssam_cdev_notifier_desc)``.
+
+Register a notifier for the event target category specified in the given
+notifier description with the specified priority. Notifiers registration is
+required to receive events, but does not enable events themselves. After a
+notifier for a specific target category has been registered, all events of that
+category will be forwarded to the userspace client and can then be read from
+the device file instance. Note that events may have to be enabled, e.g. via the
+``SSAM_CDEV_EVENT_ENABLE`` IOCTL, before the EC will send them.
+
+Only one notifier can be registered per target category and client instance. If
+a notifier has already been registered, this IOCTL will fail with ``-EEXIST``.
+
+Notifiers will automatically be removed when the device file instance is
+closed.
+
+``SSAM_CDEV_NOTIF_UNREGISTER``
+------------------------------
+
+Defined as ``_IOW(0xA5, 3, struct ssam_cdev_notifier_desc)``.
+
+Unregisters the notifier associated with the specified target category. The
+priority field will be ignored by this IOCTL. If no notifier has been
+registered for this client instance and the given category, this IOCTL will
+fail with ``-ENOENT``.
+
+``SSAM_CDEV_EVENT_ENABLE``
+--------------------------
+
+Defined as ``_IOW(0xA5, 4, struct ssam_cdev_event_desc)``.
+
+Enable the event associated with the given event descriptor.
+
+Note that this call will not register a notifier itself, it will only enable
+events on the controller. If you want to receive events by reading from the
+device file, you will need to register the corresponding notifier(s) on that
+instance.
+
+Events are not automatically disabled when the device file is closed. This must
+be done manually, via a call to the ``SSAM_CDEV_EVENT_DISABLE`` IOCTL.
+
+``SSAM_CDEV_EVENT_DISABLE``
+---------------------------
+
+Defined as ``_IOW(0xA5, 5, struct ssam_cdev_event_desc)``.
+
+Disable the event associated with the given event descriptor.
+
+Note that this will not unregister any notifiers. Events may still be received
+and forwarded to user-space after this call. The only safe way of stopping
+events from being received is unregistering all previously registered
+notifiers.
+
+
+Structures and Enums
+====================
+
+.. kernel-doc:: include/uapi/linux/surface_aggregator/cdev.h