Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/Documentation/fault-injection/nvme-fault-injection.rst b/Documentation/fault-injection/nvme-fault-injection.rst
new file mode 100644
index 000000000..1d4427890
--- /dev/null
+++ b/Documentation/fault-injection/nvme-fault-injection.rst
@@ -0,0 +1,178 @@
+NVMe Fault Injection
+====================
+Linux's fault injection framework provides a systematic way to support
+error injection via debugfs in the /sys/kernel/debug directory. When
+enabled, the default NVME_SC_INVALID_OPCODE with no retry will be
+injected into the nvme_try_complete_req. Users can change the default status
+code and no retry flag via the debugfs. The list of Generic Command
+Status can be found in include/linux/nvme.h
+
+Following examples show how to inject an error into the nvme.
+
+First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config,
+recompile the kernel. After booting up the kernel, do the
+following.
+
+Example 1: Inject default status code with no retry
+---------------------------------------------------
+
+::
+
+  mount /dev/nvme0n1 /mnt
+  echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
+  echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
+  cp a.file /mnt
+
+Expected Result::
+
+  cp: cannot stat ‘/mnt/a.file’: Input/output error
+
+Message from dmesg::
+
+  FAULT_INJECTION: forcing a failure.
+  name fault_inject, interval 1, probability 100, space 0, times 1
+  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2
+  Hardware name: innotek GmbH VirtualBox/VirtualBox,
+  BIOS VirtualBox 12/01/2006
+  Call Trace:
+    <IRQ>
+    dump_stack+0x5c/0x7d
+    should_fail+0x148/0x170
+    nvme_should_fail+0x2f/0x50 [nvme_core]
+    nvme_process_cq+0xe7/0x1d0 [nvme]
+    nvme_irq+0x1e/0x40 [nvme]
+    __handle_irq_event_percpu+0x3a/0x190
+    handle_irq_event_percpu+0x30/0x70
+    handle_irq_event+0x36/0x60
+    handle_fasteoi_irq+0x78/0x120
+    handle_irq+0xa7/0x130
+    ? tick_irq_enter+0xa8/0xc0
+    do_IRQ+0x43/0xc0
+    common_interrupt+0xa2/0xa2
+    </IRQ>
+  RIP: 0010:native_safe_halt+0x2/0x10
+  RSP: 0018:ffffffff82003e90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
+  RAX: ffffffff817a10c0 RBX: ffffffff82012480 RCX: 0000000000000000
+  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
+  RBP: 0000000000000000 R08: 000000008e38ce64 R09: 0000000000000000
+  R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff82012480
+  R13: ffffffff82012480 R14: 0000000000000000 R15: 0000000000000000
+    ? __sched_text_end+0x4/0x4
+    default_idle+0x18/0xf0
+    do_idle+0x150/0x1d0
+    cpu_startup_entry+0x6f/0x80
+    start_kernel+0x4c4/0x4e4
+    ? set_init_arg+0x55/0x55
+    secondary_startup_64+0xa5/0xb0
+    print_req_error: I/O error, dev nvme0n1, sector 9240
+  EXT4-fs error (device nvme0n1): ext4_find_entry:1436:
+  inode #2: comm cp: reading directory lblock 0
+
+Example 2: Inject default status code with retry
+------------------------------------------------
+
+::
+
+  mount /dev/nvme0n1 /mnt
+  echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
+  echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
+  echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/status
+  echo 0 > /sys/kernel/debug/nvme0n1/fault_inject/dont_retry
+
+  cp a.file /mnt
+
+Expected Result::
+
+  command success without error
+
+Message from dmesg::
+
+  FAULT_INJECTION: forcing a failure.
+  name fault_inject, interval 1, probability 100, space 0, times 1
+  CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc8+ #4
+  Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
+  Call Trace:
+    <IRQ>
+    dump_stack+0x5c/0x7d
+    should_fail+0x148/0x170
+    nvme_should_fail+0x30/0x60 [nvme_core]
+    nvme_loop_queue_response+0x84/0x110 [nvme_loop]
+    nvmet_req_complete+0x11/0x40 [nvmet]
+    nvmet_bio_done+0x28/0x40 [nvmet]
+    blk_update_request+0xb0/0x310
+    blk_mq_end_request+0x18/0x60
+    flush_smp_call_function_queue+0x3d/0xf0
+    smp_call_function_single_interrupt+0x2c/0xc0
+    call_function_single_interrupt+0xa2/0xb0
+    </IRQ>
+  RIP: 0010:native_safe_halt+0x2/0x10
+  RSP: 0018:ffffc9000068bec0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff04
+  RAX: ffffffff817a10c0 RBX: ffff88011a3c9680 RCX: 0000000000000000
+  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
+  RBP: 0000000000000001 R08: 000000008e38c131 R09: 0000000000000000
+  R10: 0000000000000000 R11: 0000000000000000 R12: ffff88011a3c9680
+  R13: ffff88011a3c9680 R14: 0000000000000000 R15: 0000000000000000
+    ? __sched_text_end+0x4/0x4
+    default_idle+0x18/0xf0
+    do_idle+0x150/0x1d0
+    cpu_startup_entry+0x6f/0x80
+    start_secondary+0x187/0x1e0
+    secondary_startup_64+0xa5/0xb0
+
+Example 3: Inject an error into the 10th admin command
+------------------------------------------------------
+
+::
+
+  echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability
+  echo 10 > /sys/kernel/debug/nvme0/fault_inject/space
+  echo 1 > /sys/kernel/debug/nvme0/fault_inject/times
+  nvme reset /dev/nvme0
+
+Expected Result::
+
+  After NVMe controller reset, the reinitialization may or may not succeed.
+  It depends on which admin command is actually forced to fail.
+
+Message from dmesg::
+
+  nvme nvme0: resetting controller
+  FAULT_INJECTION: forcing a failure.
+  name fault_inject, interval 1, probability 100, space 1, times 1
+  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-rc2+ #2
+  Hardware name: MSI MS-7A45/B150M MORTAR ARCTIC (MS-7A45), BIOS 1.50 04/25/2017
+  Call Trace:
+   <IRQ>
+   dump_stack+0x63/0x85
+   should_fail+0x14a/0x170
+   nvme_should_fail+0x38/0x80 [nvme_core]
+   nvme_irq+0x129/0x280 [nvme]
+   ? blk_mq_end_request+0xb3/0x120
+   __handle_irq_event_percpu+0x84/0x1a0
+   handle_irq_event_percpu+0x32/0x80
+   handle_irq_event+0x3b/0x60
+   handle_edge_irq+0x7f/0x1a0
+   handle_irq+0x20/0x30
+   do_IRQ+0x4e/0xe0
+   common_interrupt+0xf/0xf
+   </IRQ>
+  RIP: 0010:cpuidle_enter_state+0xc5/0x460
+  Code: ff e8 8f 5f 86 ff 80 7d c7 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 69 03 00 00 31 ff e8 62 aa 8c ff fb 66 0f 1f 44 00 00 <45> 85 ed 0f 88 37 03 00 00 4c 8b 45 d0 4c 2b 45 b8 48 ba cf f7 53
+  RSP: 0018:ffffffff88c03dd0 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdc
+  RAX: ffff9dac25a2ac80 RBX: ffffffff88d53760 RCX: 000000000000001f
+  RDX: 0000000000000000 RSI: 000000002d958403 RDI: 0000000000000000
+  RBP: ffffffff88c03e18 R08: fffffff75e35ffb7 R09: 00000a49a56c0b48
+  R10: ffffffff88c03da0 R11: 0000000000001b0c R12: ffff9dac25a34d00
+  R13: 0000000000000006 R14: 0000000000000006 R15: ffffffff88d53760
+   cpuidle_enter+0x2e/0x40
+   call_cpuidle+0x23/0x40
+   do_idle+0x201/0x280
+   cpu_startup_entry+0x1d/0x20
+   rest_init+0xaa/0xb0
+   arch_call_rest_init+0xe/0x1b
+   start_kernel+0x51c/0x53b
+   x86_64_start_reservations+0x24/0x26
+   x86_64_start_kernel+0x74/0x77
+   secondary_startup_64+0xa4/0xb0
+  nvme nvme0: Could not set queue count (16385)
+  nvme nvme0: IO queues not created