Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 297 insertions, 0 deletions

diff --git a/Documentation/fb/viafb.rst b/Documentation/fb/viafb.rst
new file mode 100644
index 000000000..8eb7a3bb0
--- /dev/null
+++ b/Documentation/fb/viafb.rst
@@ -0,0 +1,297 @@
+=======================================================
+VIA Integration Graphic Chip Console Framebuffer Driver
+=======================================================
+
+Platform
+--------
+    The console framebuffer driver is for graphics chips of
+    VIA UniChrome Family
+    (CLE266, PM800 / CN400 / CN300,
+    P4M800CE / P4M800Pro / CN700 / VN800,
+    CX700 / VX700, K8M890, P4M890,
+    CN896 / P4M900, VX800, VX855)
+
+Driver features
+---------------
+    Device: CRT, LCD, DVI
+
+    Support viafb_mode::
+
+	CRT:
+	    640x480(60, 75, 85, 100, 120 Hz), 720x480(60 Hz),
+	    720x576(60 Hz), 800x600(60, 75, 85, 100, 120 Hz),
+	    848x480(60 Hz), 856x480(60 Hz), 1024x512(60 Hz),
+	    1024x768(60, 75, 85, 100 Hz), 1152x864(75 Hz),
+	    1280x768(60 Hz), 1280x960(60 Hz), 1280x1024(60, 75, 85 Hz),
+	    1440x1050(60 Hz), 1600x1200(60, 75 Hz), 1280x720(60 Hz),
+	    1920x1080(60 Hz), 1400x1050(60 Hz), 800x480(60 Hz)
+
+    color depth: 8 bpp, 16 bpp, 32 bpp supports.
+
+    Support 2D hardware accelerator.
+
+Using the viafb module
+----------------------
+    Start viafb with default settings::
+
+	#modprobe viafb
+
+    Start viafb with user options::
+
+	#modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60
+		  viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1
+		  viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60
+		  viafb_SAMM_ON=1
+
+    viafb_mode:
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp:
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh:
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_lcd_dsp_method:
+	- 0 : expansion (default)
+	- 1 : centering
+
+    viafb_lcd_mode:
+	0 : LCD panel with LSB data format input (default)
+	1 : LCD panel with MSB data format input
+
+    viafb_lcd_panel_id:
+	- 0 : Resolution: 640x480, Channel: single, Dithering: Enable
+	- 1 : Resolution: 800x600, Channel: single, Dithering: Enable
+	- 2 : Resolution: 1024x768, Channel: single, Dithering: Enable (default)
+	- 3 : Resolution: 1280x768, Channel: single, Dithering: Enable
+	- 4 : Resolution: 1280x1024, Channel: dual, Dithering: Enable
+	- 5 : Resolution: 1400x1050, Channel: dual, Dithering: Enable
+	- 6 : Resolution: 1600x1200, Channel: dual, Dithering: Enable
+
+	- 8 : Resolution: 800x480, Channel: single, Dithering: Enable
+	- 9 : Resolution: 1024x768, Channel: dual, Dithering: Enable
+	- 10: Resolution: 1024x768, Channel: single, Dithering: Disable
+	- 11: Resolution: 1024x768, Channel: dual, Dithering: Disable
+	- 12: Resolution: 1280x768, Channel: single, Dithering: Disable
+	- 13: Resolution: 1280x1024, Channel: dual, Dithering: Disable
+	- 14: Resolution: 1400x1050, Channel: dual, Dithering: Disable
+	- 15: Resolution: 1600x1200, Channel: dual, Dithering: Disable
+	- 16: Resolution: 1366x768, Channel: single, Dithering: Disable
+	- 17: Resolution: 1024x600, Channel: single, Dithering: Enable
+	- 18: Resolution: 1280x768, Channel: dual, Dithering: Enable
+	- 19: Resolution: 1280x800, Channel: single, Dithering: Enable
+
+    viafb_accel:
+	- 0 : No 2D Hardware Acceleration
+	- 1 : 2D Hardware Acceleration (default)
+
+    viafb_SAMM_ON:
+	- 0 : viafb_SAMM_ON disable (default)
+	- 1 : viafb_SAMM_ON enable
+
+    viafb_mode1: (secondary display device)
+	- 640x480 (default)
+	- 720x480
+	- 800x600
+	- 1024x768
+
+    viafb_bpp1: (secondary display device)
+	- 8, 16, 32 (default:32)
+
+    viafb_refresh1: (secondary display device)
+	- 60, 75, 85, 100, 120 (default:60)
+
+    viafb_active_dev:
+	This option is used to specify active devices.(CRT, DVI, CRT+LCD...)
+	DVI stands for DVI or HDMI, E.g., If you want to enable HDMI,
+	set viafb_active_dev=DVI. In SAMM case, the previous of
+	viafb_active_dev is primary device, and the following is
+	secondary device.
+
+	For example:
+
+	To enable one device, such as DVI only, we can use::
+
+	    modprobe viafb viafb_active_dev=DVI
+
+	To enable two devices, such as CRT+DVI::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI;
+
+	For DuoView case, we can use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI
+
+	OR::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT...
+
+	For SAMM case:
+
+	If CRT is primary and DVI is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=CRT+DVI viafb_SAMM_ON=1...
+
+	If DVI is primary and CRT is secondary, we should use::
+
+	    modprobe viafb viafb_active_dev=DVI+CRT viafb_SAMM_ON=1...
+
+    viafb_display_hardware_layout:
+	This option is used to specify display hardware layout for CX700 chip.
+
+	- 1 : LCD only
+	- 2 : DVI only
+	- 3 : LCD+DVI (default)
+	- 4 : LCD1+LCD2 (internal + internal)
+	- 16: LCD1+ExternalLCD2 (internal + external)
+
+    viafb_second_size:
+	This option is used to set second device memory size(MB) in SAMM case.
+	The minimal size is 16.
+
+    viafb_platform_epia_dvi:
+	This option is used to enable DVI on EPIA - M
+
+	- 0 : No DVI on EPIA - M (default)
+	- 1 : DVI on EPIA - M
+
+    viafb_bus_width:
+	When using 24 - Bit Bus Width Digital Interface,
+	this option should be set.
+
+	- 12: 12-Bit LVDS or 12-Bit TMDS (default)
+	- 24: 24-Bit LVDS or 24-Bit TMDS
+
+    viafb_device_lcd_dualedge:
+	When using Dual Edge Panel, this option should be set.
+
+	- 0 : No Dual Edge Panel (default)
+	- 1 : Dual Edge Panel
+
+    viafb_lcd_port:
+	This option is used to specify LCD output port,
+	available values are "DVP0" "DVP1" "DFP_HIGHLOW" "DFP_HIGH" "DFP_LOW".
+
+	for external LCD + external DVI on CX700(External LCD is on DVP0),
+	we should use::
+
+	    modprobe viafb viafb_lcd_port=DVP0...
+
+Notes:
+    1. CRT may not display properly for DuoView CRT & DVI display at
+       the "640x480" PAL mode with DVI overscan enabled.
+    2. SAMM stands for single adapter multi monitors. It is different from
+       multi-head since SAMM support multi monitor at driver layers, thus fbcon
+       layer doesn't even know about it; SAMM's second screen doesn't have a
+       device node file, thus a user mode application can't access it directly.
+       When SAMM is enabled, viafb_mode and viafb_mode1, viafb_bpp and
+       viafb_bpp1, viafb_refresh and viafb_refresh1 can be different.
+    3. When console is depending on viafbinfo1, dynamically change resolution
+       and bpp, need to call VIAFB specified ioctl interface VIAFB_SET_DEVICE
+       instead of calling common ioctl function FBIOPUT_VSCREENINFO since
+       viafb doesn't support multi-head well, or it will cause screen crush.
+
+
+Configure viafb with "fbset" tool
+---------------------------------
+
+    "fbset" is an inbox utility of Linux.
+
+    1. Inquire current viafb information, type::
+
+	   # fbset -i
+
+    2. Set various resolutions and viafb_refresh rates::
+
+	   # fbset <resolution-vertical_sync>
+
+       example::
+
+	   # fbset "1024x768-75"
+
+       or::
+
+	   # fbset -g 1024 768 1024 768 32
+
+       Check the file "/etc/fb.modes" to find display modes available.
+
+    3. Set the color depth::
+
+	   # fbset -depth <value>
+
+       example::
+
+	   # fbset -depth 16
+
+
+Configure viafb via /proc
+-------------------------
+    The following files exist in /proc/viafb
+
+    supported_output_devices
+	This read-only file contains a full ',' separated list containing all
+	output devices that could be available on your platform. It is likely
+	that not all of those have a connector on your hardware but it should
+	provide a good starting point to figure out which of those names match
+	a real connector.
+
+	Example::
+
+		# cat /proc/viafb/supported_output_devices
+
+    iga1/output_devices, iga2/output_devices
+	These two files are readable and writable. iga1 and iga2 are the two
+	independent units that produce the screen image. Those images can be
+	forwarded to one or more output devices. Reading those files is a way
+	to query which output devices are currently used by an iga.
+
+	Example::
+
+		# cat /proc/viafb/iga1/output_devices
+
+	If there are no output devices printed the output of this iga is lost.
+	This can happen for example if only one (the other) iga is used.
+	Writing to these files allows adjusting the output devices during
+	runtime. One can add new devices, remove existing ones or switch
+	between igas. Essentially you can write a ',' separated list of device
+	names (or a single one) in the same format as the output to those
+	files. You can add a '+' or '-' as a prefix allowing simple addition
+	and removal of devices. So a prefix '+' adds the devices from your list
+	to the already existing ones, '-' removes the listed devices from the
+	existing ones and if no prefix is given it replaces all existing ones
+	with the listed ones. If you remove devices they are expected to turn
+	off. If you add devices that are already part of the other iga they are
+	removed there and added to the new one.
+
+	Examples:
+
+	Add CRT as output device to iga1::
+
+		# echo +CRT > /proc/viafb/iga1/output_devices
+
+	Remove (turn off) DVP1 and LVDS1 as output devices of iga2::
+
+		# echo -DVP1,LVDS1 > /proc/viafb/iga2/output_devices
+
+	Replace all iga1 output devices by CRT::
+
+		# echo CRT > /proc/viafb/iga1/output_devices
+
+
+Bootup with viafb
+-----------------
+
+Add the following line to your grub.conf::
+
+    append = "video=viafb:viafb_mode=1024x768,viafb_bpp=32,viafb_refresh=85"
+
+
+VIA Framebuffer modes
+=====================
+
+.. include:: viafb.modes
+   :literal: