Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 250 insertions, 0 deletions

diff --git a/Documentation/filesystems/affs.rst b/Documentation/filesystems/affs.rst
new file mode 100644
index 000000000..5776cbd5f
--- /dev/null
+++ b/Documentation/filesystems/affs.rst
@@ -0,0 +1,250 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Overview of Amiga Filesystems
+=============================
+
+Not all varieties of the Amiga filesystems are supported for reading and
+writing. The Amiga currently knows six different filesystems:
+
+==============	===============================================================
+DOS\0		The old or original filesystem, not really suited for
+		hard disks and normally not used on them, either.
+		Supported read/write.
+
+DOS\1		The original Fast File System. Supported read/write.
+
+DOS\2		The old "international" filesystem. International means that
+		a bug has been fixed so that accented ("international") letters
+		in file names are case-insensitive, as they ought to be.
+		Supported read/write.
+
+DOS\3		The "international" Fast File System.  Supported read/write.
+
+DOS\4		The original filesystem with directory cache. The directory
+		cache speeds up directory accesses on floppies considerably,
+		but slows down file creation/deletion. Doesn't make much
+		sense on hard disks. Supported read only.
+
+DOS\5		The Fast File System with directory cache. Supported read only.
+==============	===============================================================
+
+All of the above filesystems allow block sizes from 512 to 32K bytes.
+Supported block sizes are: 512, 1024, 2048 and 4096 bytes. Larger blocks
+speed up almost everything at the expense of wasted disk space. The speed
+gain above 4K seems not really worth the price, so you don't lose too
+much here, either.
+
+The muFS (multi user File System) equivalents of the above file systems
+are supported, too.
+
+Mount options for the AFFS
+==========================
+
+protect
+		If this option is set, the protection bits cannot be altered.
+
+setuid[=uid]
+		This sets the owner of all files and directories in the file
+		system to uid or the uid of the current user, respectively.
+
+setgid[=gid]
+		Same as above, but for gid.
+
+mode=mode
+		Sets the mode flags to the given (octal) value, regardless
+		of the original permissions. Directories will get an x
+		permission if the corresponding r bit is set.
+		This is useful since most of the plain AmigaOS files
+		will map to 600.
+
+nofilenametruncate
+		The file system will return an error when filename exceeds
+		standard maximum filename length (30 characters).
+
+reserved=num
+		Sets the number of reserved blocks at the start of the
+		partition to num. You should never need this option.
+		Default is 2.
+
+root=block
+		Sets the block number of the root block. This should never
+		be necessary.
+
+bs=blksize
+		Sets the blocksize to blksize. Valid block sizes are 512,
+		1024, 2048 and 4096. Like the root option, this should
+		never be necessary, as the affs can figure it out itself.
+
+quiet
+		The file system will not return an error for disallowed
+		mode changes.
+
+verbose
+		The volume name, file system type and block size will
+		be written to the syslog when the filesystem is mounted.
+
+mufs
+		The filesystem is really a muFS, also it doesn't
+		identify itself as one. This option is necessary if
+		the filesystem wasn't formatted as muFS, but is used
+		as one.
+
+prefix=path
+		Path will be prefixed to every absolute path name of
+		symbolic links on an AFFS partition. Default = "/".
+		(See below.)
+
+volume=name
+		When symbolic links with an absolute path are created
+		on an AFFS partition, name will be prepended as the
+		volume name. Default = "" (empty string).
+		(See below.)
+
+Handling of the Users/Groups and protection flags
+=================================================
+
+Amiga -> Linux:
+
+The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:
+
+  - R maps to r for user, group and others. On directories, R implies x.
+
+  - W maps to w.
+
+  - E maps to x.
+
+  - D is ignored.
+
+  - H, S and P are always retained and ignored under Linux.
+
+  - A is cleared when a file is written to.
+
+User id and group id will be used unless set[gu]id are given as mount
+options. Since most of the Amiga file systems are single user systems
+they will be owned by root. The root directory (the mount point) of the
+Amiga filesystem will be owned by the user who actually mounts the
+filesystem (the root directory doesn't have uid/gid fields).
+
+Linux -> Amiga:
+
+The Linux rwxrwxrwx file mode is handled as follows:
+
+  - r permission will allow R for user, group and others.
+
+  - w permission will allow W for user, group and others.
+
+  - x permission of the user will allow E for plain files.
+
+  - D will be allowed for user, group and others.
+
+  - All other flags (suid, sgid, ...) are ignored and will
+    not be retained.
+
+Newly created files and directories will get the user and group ID
+of the current user and a mode according to the umask.
+
+Symbolic links
+==============
+
+Although the Amiga and Linux file systems resemble each other, there
+are some, not always subtle, differences. One of them becomes apparent
+with symbolic links. While Linux has a file system with exactly one
+root directory, the Amiga has a separate root directory for each
+file system (for example, partition, floppy disk, ...). With the Amiga,
+these entities are called "volumes". They have symbolic names which
+can be used to access them. Thus, symbolic links can point to a
+different volume. AFFS turns the volume name into a directory name
+and prepends the prefix path (see prefix option) to it.
+
+Example:
+You mount all your Amiga partitions under /amiga/<volume> (where
+<volume> is the name of the volume), and you give the option
+"prefix=/amiga/" when mounting all your AFFS partitions. (They
+might be "User", "WB" and "Graphics", the mount points /amiga/User,
+/amiga/WB and /amiga/Graphics). A symbolic link referring to
+"User:sc/include/dos/dos.h" will be followed to
+"/amiga/User/sc/include/dos/dos.h".
+
+Examples
+========
+
+Command line::
+
+    mount  Archive/Amiga/Workbench3.1.adf /mnt -t affs -o loop,verbose
+    mount  /dev/sda3 /Amiga -t affs
+
+/etc/fstab entry::
+
+    /dev/sdb5	/amiga/Workbench    affs    noauto,user,exec,verbose 0 0
+
+IMPORTANT NOTE
+==============
+
+If you boot Windows 95 (don't know about 3.x, 98 and NT) while you
+have an Amiga harddisk connected to your PC, it will overwrite
+the bytes 0x00dc..0x00df of block 0 with garbage, thus invalidating
+the Rigid Disk Block. Sheer luck has it that this is an unused
+area of the RDB, so only the checksum doesn't match anymore.
+Linux will ignore this garbage and recognize the RDB anyway, but
+before you connect that drive to your Amiga again, you must
+restore or repair your RDB. So please do make a backup copy of it
+before booting Windows!
+
+If the damage is already done, the following should fix the RDB
+(where <disk> is the device name).
+
+DO AT YOUR OWN RISK::
+
+  dd if=/dev/<disk> of=rdb.tmp count=1
+  cp rdb.tmp rdb.fixed
+  dd if=/dev/zero of=rdb.fixed bs=1 seek=220 count=4
+  dd if=rdb.fixed of=/dev/<disk>
+
+Bugs, Restrictions, Caveats
+===========================
+
+Quite a few things may not work as advertised. Not everything is
+tested, though several hundred MB have been read and written using
+this fs. For a most up-to-date list of bugs please consult
+fs/affs/Changes.
+
+By default, filenames are truncated to 30 characters without warning.
+'nofilenametruncate' mount option can change that behavior.
+
+Case is ignored by the affs in filename matching, but Linux shells
+do care about the case. Example (with /wb being an affs mounted fs)::
+
+    rm /wb/WRONGCASE
+
+will remove /mnt/wrongcase, but::
+
+    rm /wb/WR*
+
+will not since the names are matched by the shell.
+
+The block allocation is designed for hard disk partitions. If more
+than 1 process writes to a (small) diskette, the blocks are allocated
+in an ugly way (but the real AFFS doesn't do much better). This
+is also true when space gets tight.
+
+You cannot execute programs on an OFS (Old File System), since the
+program files cannot be memory mapped due to the 488 byte blocks.
+For the same reason you cannot mount an image on such a filesystem
+via the loopback device.
+
+The bitmap valid flag in the root block may not be accurate when the
+system crashes while an affs partition is mounted. There's currently
+no way to fix a garbled filesystem without an Amiga (disk validator)
+or manually (who would do this?). Maybe later.
+
+If you mount affs partitions on system startup, you may want to tell
+fsck that the fs should not be checked (place a '0' in the sixth field
+of /etc/fstab).
+
+It's not possible to read floppy disks with a normal PC or workstation
+due to an incompatibility with the Amiga floppy controller.
+
+If you are interested in an Amiga Emulator for Linux, look at
+
+http://web.archive.org/web/%2E/http://www.freiburg.linux.de/~uae/