Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 400 insertions, 0 deletions

diff --git a/Documentation/firmware-guide/acpi/namespace.rst b/Documentation/firmware-guide/acpi/namespace.rst
new file mode 100644
index 000000000..4ef963679
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/namespace.rst
@@ -0,0 +1,400 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===================================================
+ACPI Device Tree - Representation of ACPI Namespace
+===================================================
+
+:Copyright: |copy| 2013, Intel Corporation
+
+:Author: Lv Zheng <lv.zheng@intel.com>
+
+:Credit:   Thanks for the help from Zhang Rui <rui.zhang@intel.com> and
+           Rafael J.Wysocki <rafael.j.wysocki@intel.com>.
+
+Abstract
+========
+The Linux ACPI subsystem converts ACPI namespace objects into a Linux
+device tree under the /sys/devices/LNXSYSTEM:00 and updates it upon
+receiving ACPI hotplug notification events.  For each device object
+in this hierarchy there is a corresponding symbolic link in the
+/sys/bus/acpi/devices.
+
+This document illustrates the structure of the ACPI device tree.
+
+ACPI Definition Blocks
+======================
+
+The ACPI firmware sets up RSDP (Root System Description Pointer) in the
+system memory address space pointing to the XSDT (Extended System
+Description Table).  The XSDT always points to the FADT (Fixed ACPI
+Description Table) using its first entry, the data within the FADT
+includes various fixed-length entries that describe fixed ACPI features
+of the hardware.  The FADT contains a pointer to the DSDT
+(Differentiated System Description Table).  The XSDT also contains
+entries pointing to possibly multiple SSDTs (Secondary System
+Description Table).
+
+The DSDT and SSDT data is organized in data structures called definition
+blocks that contain definitions of various objects, including ACPI
+control methods, encoded in AML (ACPI Machine Language).  The data block
+of the DSDT along with the contents of SSDTs represents a hierarchical
+data structure called the ACPI namespace whose topology reflects the
+structure of the underlying hardware platform.
+
+The relationships between ACPI System Definition Tables described above
+are illustrated in the following diagram::
+
+   +---------+    +-------+    +--------+    +------------------------+
+   |  RSDP   | +->| XSDT  | +->|  FADT  |    |  +-------------------+ |
+   +---------+ |  +-------+ |  +--------+  +-|->|       DSDT        | |
+   | Pointer | |  | Entry |-+  | ...... |  | |  +-------------------+ |
+   +---------+ |  +-------+    | X_DSDT |--+ |  | Definition Blocks | |
+   | Pointer |-+  | ..... |    | ...... |    |  +-------------------+ |
+   +---------+    +-------+    +--------+    |  +-------------------+ |
+                  | Entry |------------------|->|       SSDT        | |
+                  +- - - -+                  |  +-------------------| |
+                  | Entry | - - - - - - - -+ |  | Definition Blocks | |
+                  +- - - -+                | |  +-------------------+ |
+                                           | |  +- - - - - - - - - -+ |
+                                           +-|->|       SSDT        | |
+                                             |  +-------------------+ |
+                                             |  | Definition Blocks | |
+                                             |  +- - - - - - - - - -+ |
+                                             +------------------------+
+                                                          |
+                                             OSPM Loading |
+                                                         \|/
+                                                   +----------------+
+                                                   | ACPI Namespace |
+                                                   +----------------+
+
+                  Figure 1. ACPI Definition Blocks
+
+.. note:: RSDP can also contain a pointer to the RSDT (Root System
+   Description Table).  Platforms provide RSDT to enable
+   compatibility with ACPI 1.0 operating systems.  The OS is expected
+   to use XSDT, if present.
+
+
+Example ACPI Namespace
+======================
+
+All definition blocks are loaded into a single namespace.  The namespace
+is a hierarchy of objects identified by names and paths.
+The following naming conventions apply to object names in the ACPI
+namespace:
+
+   1. All names are 32 bits long.
+   2. The first byte of a name must be one of 'A' - 'Z', '_'.
+   3. Each of the remaining bytes of a name must be one of 'A' - 'Z', '0'
+      - '9', '_'.
+   4. Names starting with '_' are reserved by the ACPI specification.
+   5. The '\' symbol represents the root of the namespace (i.e. names
+      prepended with '\' are relative to the namespace root).
+   6. The '^' symbol represents the parent of the current namespace node
+      (i.e. names prepended with '^' are relative to the parent of the
+      current namespace node).
+
+The figure below shows an example ACPI namespace::
+
+   +------+
+   | \    |                     Root
+   +------+
+     |
+     | +------+
+     +-| _PR  |                 Scope(_PR): the processor namespace
+     | +------+
+     |   |
+     |   | +------+
+     |   +-| CPU0 |             Processor(CPU0): the first processor
+     |     +------+
+     |
+     | +------+
+     +-| _SB  |                 Scope(_SB): the system bus namespace
+     | +------+
+     |   |
+     |   | +------+
+     |   +-| LID0 |             Device(LID0); the lid device
+     |   | +------+
+     |   |   |
+     |   |   | +------+
+     |   |   +-| _HID |         Name(_HID, "PNP0C0D"): the hardware ID
+     |   |   | +------+
+     |   |   |
+     |   |   | +------+
+     |   |   +-| _STA |         Method(_STA): the status control method
+     |   |     +------+
+     |   |
+     |   | +------+
+     |   +-| PCI0 |             Device(PCI0); the PCI root bridge
+     |     +------+
+     |       |
+     |       | +------+
+     |       +-| _HID |         Name(_HID, "PNP0A08"): the hardware ID
+     |       | +------+
+     |       |
+     |       | +------+
+     |       +-| _CID |         Name(_CID, "PNP0A03"): the compatible ID
+     |       | +------+
+     |       |
+     |       | +------+
+     |       +-| RP03 |         Scope(RP03): the PCI0 power scope
+     |       | +------+
+     |       |   |
+     |       |   | +------+
+     |       |   +-| PXP3 |     PowerResource(PXP3): the PCI0 power resource
+     |       |     +------+
+     |       |
+     |       | +------+
+     |       +-| GFX0 |         Device(GFX0): the graphics adapter
+     |         +------+
+     |           |
+     |           | +------+
+     |           +-| _ADR |     Name(_ADR, 0x00020000): the PCI bus address
+     |           | +------+
+     |           |
+     |           | +------+
+     |           +-| DD01 |     Device(DD01): the LCD output device
+     |             +------+
+     |               |
+     |               | +------+
+     |               +-| _BCL | Method(_BCL): the backlight control method
+     |                 +------+
+     |
+     | +------+
+     +-| _TZ  |                 Scope(_TZ): the thermal zone namespace
+     | +------+
+     |   |
+     |   | +------+
+     |   +-| FN00 |             PowerResource(FN00): the FAN0 power resource
+     |   | +------+
+     |   |
+     |   | +------+
+     |   +-| FAN0 |             Device(FAN0): the FAN0 cooling device
+     |   | +------+
+     |   |   |
+     |   |   | +------+
+     |   |   +-| _HID |         Name(_HID, "PNP0A0B"): the hardware ID
+     |   |     +------+
+     |   |
+     |   | +------+
+     |   +-| TZ00 |             ThermalZone(TZ00); the FAN thermal zone
+     |     +------+
+     |
+     | +------+
+     +-| _GPE |                 Scope(_GPE): the GPE namespace
+       +------+
+
+                     Figure 2. Example ACPI Namespace
+
+
+Linux ACPI Device Objects
+=========================
+
+The Linux kernel's core ACPI subsystem creates struct acpi_device
+objects for ACPI namespace objects representing devices, power resources
+processors, thermal zones.  Those objects are exported to user space via
+sysfs as directories in the subtree under /sys/devices/LNXSYSTM:00.  The
+format of their names is <bus_id:instance>, where 'bus_id' refers to the
+ACPI namespace representation of the given object and 'instance' is used
+for distinguishing different object of the same 'bus_id' (it is
+two-digit decimal representation of an unsigned integer).
+
+The value of 'bus_id' depends on the type of the object whose name it is
+part of as listed in the table below::
+
+                +---+-----------------+-------+----------+
+                |   | Object/Feature  | Table | bus_id   |
+                +---+-----------------+-------+----------+
+                | N | Root            | xSDT  | LNXSYSTM |
+                +---+-----------------+-------+----------+
+                | N | Device          | xSDT  | _HID     |
+                +---+-----------------+-------+----------+
+                | N | Processor       | xSDT  | LNXCPU   |
+                +---+-----------------+-------+----------+
+                | N | ThermalZone     | xSDT  | LNXTHERM |
+                +---+-----------------+-------+----------+
+                | N | PowerResource   | xSDT  | LNXPOWER |
+                +---+-----------------+-------+----------+
+                | N | Other Devices   | xSDT  | device   |
+                +---+-----------------+-------+----------+
+                | F | PWR_BUTTON      | FADT  | LNXPWRBN |
+                +---+-----------------+-------+----------+
+                | F | SLP_BUTTON      | FADT  | LNXSLPBN |
+                +---+-----------------+-------+----------+
+                | M | Video Extension | xSDT  | LNXVIDEO |
+                +---+-----------------+-------+----------+
+                | M | ATA Controller  | xSDT  | LNXIOBAY |
+                +---+-----------------+-------+----------+
+                | M | Docking Station | xSDT  | LNXDOCK  |
+                +---+-----------------+-------+----------+
+
+                 Table 1. ACPI Namespace Objects Mapping
+
+The following rules apply when creating struct acpi_device objects on
+the basis of the contents of ACPI System Description Tables (as
+indicated by the letter in the first column and the notation in the
+second column of the table above):
+
+   N:
+      The object's source is an ACPI namespace node (as indicated by the
+      named object's type in the second column).  In that case the object's
+      directory in sysfs will contain the 'path' attribute whose value is
+      the full path to the node from the namespace root.
+   F:
+      The struct acpi_device object is created for a fixed hardware
+      feature (as indicated by the fixed feature flag's name in the second
+      column), so its sysfs directory will not contain the 'path'
+      attribute.
+   M:
+      The struct acpi_device object is created for an ACPI namespace node
+      with specific control methods (as indicated by the ACPI defined
+      device's type in the second column).  The 'path' attribute containing
+      its namespace path will be present in its sysfs directory.  For
+      example, if the _BCL method is present for an ACPI namespace node, a
+      struct acpi_device object with LNXVIDEO 'bus_id' will be created for
+      it.
+
+The third column of the above table indicates which ACPI System
+Description Tables contain information used for the creation of the
+struct acpi_device objects represented by the given row (xSDT means DSDT
+or SSDT).
+
+The fourth column of the above table indicates the 'bus_id' generation
+rule of the struct acpi_device object:
+
+   _HID:
+      _HID in the last column of the table means that the object's bus_id
+      is derived from the _HID/_CID identification objects present under
+      the corresponding ACPI namespace node. The object's sysfs directory
+      will then contain the 'hid' and 'modalias' attributes that can be
+      used to retrieve the _HID and _CIDs of that object.
+   LNXxxxxx:
+      The 'modalias' attribute is also present for struct acpi_device
+      objects having bus_id of the "LNXxxxxx" form (pseudo devices), in
+      which cases it contains the bus_id string itself.
+   device:
+      'device' in the last column of the table indicates that the object's
+      bus_id cannot be determined from _HID/_CID of the corresponding
+      ACPI namespace node, although that object represents a device (for
+      example, it may be a PCI device with _ADR defined and without _HID
+      or _CID).  In that case the string 'device' will be used as the
+      object's bus_id.
+
+
+Linux ACPI Physical Device Glue
+===============================
+
+ACPI device (i.e. struct acpi_device) objects may be linked to other
+objects in the Linux' device hierarchy that represent "physical" devices
+(for example, devices on the PCI bus).  If that happens, it means that
+the ACPI device object is a "companion" of a device otherwise
+represented in a different way and is used (1) to provide configuration
+information on that device which cannot be obtained by other means and
+(2) to do specific things to the device with the help of its ACPI
+control methods.  One ACPI device object may be linked this way to
+multiple "physical" devices.
+
+If an ACPI device object is linked to a "physical" device, its sysfs
+directory contains the "physical_node" symbolic link to the sysfs
+directory of the target device object.  In turn, the target device's
+sysfs directory will then contain the "firmware_node" symbolic link to
+the sysfs directory of the companion ACPI device object.
+The linking mechanism relies on device identification provided by the
+ACPI namespace.  For example, if there's an ACPI namespace object
+representing a PCI device (i.e. a device object under an ACPI namespace
+object representing a PCI bridge) whose _ADR returns 0x00020000 and the
+bus number of the parent PCI bridge is 0, the sysfs directory
+representing the struct acpi_device object created for that ACPI
+namespace object will contain the 'physical_node' symbolic link to the
+/sys/devices/pci0000:00/0000:00:02:0/ sysfs directory of the
+corresponding PCI device.
+
+The linking mechanism is generally bus-specific.  The core of its
+implementation is located in the drivers/acpi/glue.c file, but there are
+complementary parts depending on the bus types in question located
+elsewhere.  For example, the PCI-specific part of it is located in
+drivers/pci/pci-acpi.c.
+
+
+Example Linux ACPI Device Tree
+=================================
+
+The sysfs hierarchy of struct acpi_device objects corresponding to the
+example ACPI namespace illustrated in Figure 2 with the addition of
+fixed PWR_BUTTON/SLP_BUTTON devices is shown below::
+
+   +--------------+---+-----------------+
+   | LNXSYSTEM:00 | \ | acpi:LNXSYSTEM: |
+   +--------------+---+-----------------+
+     |
+     | +-------------+-----+----------------+
+     +-| LNXPWRBN:00 | N/A | acpi:LNXPWRBN: |
+     | +-------------+-----+----------------+
+     |
+     | +-------------+-----+----------------+
+     +-| LNXSLPBN:00 | N/A | acpi:LNXSLPBN: |
+     | +-------------+-----+----------------+
+     |
+     | +-----------+------------+--------------+
+     +-| LNXCPU:00 | \_PR_.CPU0 | acpi:LNXCPU: |
+     | +-----------+------------+--------------+
+     |
+     | +-------------+-------+----------------+
+     +-| LNXSYBUS:00 | \_SB_ | acpi:LNXSYBUS: |
+     | +-------------+-------+----------------+
+     |   |
+     |   | +- - - - - - - +- - - - - - +- - - - - - - -+
+     |   +-| PNP0C0D:00 | \_SB_.LID0 | acpi:PNP0C0D: |
+     |   | +- - - - - - - +- - - - - - +- - - - - - - -+
+     |   |
+     |   | +------------+------------+-----------------------+
+     |   +-| PNP0A08:00 | \_SB_.PCI0 | acpi:PNP0A08:PNP0A03: |
+     |     +------------+------------+-----------------------+
+     |       |
+     |       | +-----------+-----------------+-----+
+     |       +-| device:00 | \_SB_.PCI0.RP03 | N/A |
+     |       | +-----------+-----------------+-----+
+     |       |   |
+     |       |   | +-------------+----------------------+----------------+
+     |       |   +-| LNXPOWER:00 | \_SB_.PCI0.RP03.PXP3 | acpi:LNXPOWER: |
+     |       |     +-------------+----------------------+----------------+
+     |       |
+     |       | +-------------+-----------------+----------------+
+     |       +-| LNXVIDEO:00 | \_SB_.PCI0.GFX0 | acpi:LNXVIDEO: |
+     |         +-------------+-----------------+----------------+
+     |           |
+     |           | +-----------+-----------------+-----+
+     |           +-| device:01 | \_SB_.PCI0.DD01 | N/A |
+     |             +-----------+-----------------+-----+
+     |
+     | +-------------+-------+----------------+
+     +-| LNXSYBUS:01 | \_TZ_ | acpi:LNXSYBUS: |
+       +-------------+-------+----------------+
+         |
+         | +-------------+------------+----------------+
+         +-| LNXPOWER:0a | \_TZ_.FN00 | acpi:LNXPOWER: |
+         | +-------------+------------+----------------+
+         |
+         | +------------+------------+---------------+
+         +-| PNP0C0B:00 | \_TZ_.FAN0 | acpi:PNP0C0B: |
+         | +------------+------------+---------------+
+         |
+         | +-------------+------------+----------------+
+         +-| LNXTHERM:00 | \_TZ_.TZ00 | acpi:LNXTHERM: |
+           +-------------+------------+----------------+
+
+                  Figure 3. Example Linux ACPI Device Tree
+
+.. note:: Each node is represented as "object/path/modalias", where:
+
+   1. 'object' is the name of the object's directory in sysfs.
+   2. 'path' is the ACPI namespace path of the corresponding
+      ACPI namespace object, as returned by the object's 'path'
+      sysfs attribute.
+   3. 'modalias' is the value of the object's 'modalias' sysfs
+      attribute (as described earlier in this document).
+
+.. note:: N/A indicates the device object does not have the 'path' or the
+   'modalias' attribute.