Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/Documentation/gpu/tegra.rst b/Documentation/gpu/tegra.rst
new file mode 100644
index 000000000..d2ed8938c
--- /dev/null
+++ b/Documentation/gpu/tegra.rst
@@ -0,0 +1,178 @@
+===============================================
+ drm/tegra NVIDIA Tegra GPU and display driver
+===============================================
+
+NVIDIA Tegra SoCs support a set of display, graphics and video functions via
+the host1x controller. host1x supplies command streams, gathered from a push
+buffer provided directly by the CPU, to its clients via channels. Software,
+or blocks amongst themselves, can use syncpoints for synchronization.
+
+Up until, but not including, Tegra124 (aka Tegra K1) the drm/tegra driver
+supports the built-in GPU, comprised of the gr2d and gr3d engines. Starting
+with Tegra124 the GPU is based on the NVIDIA desktop GPU architecture and
+supported by the drm/nouveau driver.
+
+The drm/tegra driver supports NVIDIA Tegra SoC generations since Tegra20. It
+has three parts:
+
+  - A host1x driver that provides infrastructure and access to the host1x
+    services.
+
+  - A KMS driver that supports the display controllers as well as a number of
+    outputs, such as RGB, HDMI, DSI, and DisplayPort.
+
+  - A set of custom userspace IOCTLs that can be used to submit jobs to the
+    GPU and video engines via host1x.
+
+Driver Infrastructure
+=====================
+
+The various host1x clients need to be bound together into a logical device in
+order to expose their functionality to users. The infrastructure that supports
+this is implemented in the host1x driver. When a driver is registered with the
+infrastructure it provides a list of compatible strings specifying the devices
+that it needs. The infrastructure creates a logical device and scan the device
+tree for matching device nodes, adding the required clients to a list. Drivers
+for individual clients register with the infrastructure as well and are added
+to the logical host1x device.
+
+Once all clients are available, the infrastructure will initialize the logical
+device using a driver-provided function which will set up the bits specific to
+the subsystem and in turn initialize each of its clients.
+
+Similarly, when one of the clients is unregistered, the infrastructure will
+destroy the logical device by calling back into the driver, which ensures that
+the subsystem specific bits are torn down and the clients destroyed in turn.
+
+Host1x Infrastructure Reference
+-------------------------------
+
+.. kernel-doc:: include/linux/host1x.h
+
+.. kernel-doc:: drivers/gpu/host1x/bus.c
+   :export:
+
+Host1x Syncpoint Reference
+--------------------------
+
+.. kernel-doc:: drivers/gpu/host1x/syncpt.c
+   :export:
+
+KMS driver
+==========
+
+The display hardware has remained mostly backwards compatible over the various
+Tegra SoC generations, up until Tegra186 which introduces several changes that
+make it difficult to support with a parameterized driver.
+
+Display Controllers
+-------------------
+
+Tegra SoCs have two display controllers, each of which can be associated with
+zero or more outputs. Outputs can also share a single display controller, but
+only if they run with compatible display timings. Two display controllers can
+also share a single framebuffer, allowing cloned configurations even if modes
+on two outputs don't match. A display controller is modelled as a CRTC in KMS
+terms.
+
+On Tegra186, the number of display controllers has been increased to three. A
+display controller can no longer drive all of the outputs. While two of these
+controllers can drive both DSI outputs and both SOR outputs, the third cannot
+drive any DSI.
+
+Windows
+~~~~~~~
+
+A display controller controls a set of windows that can be used to composite
+multiple buffers onto the screen. While it is possible to assign arbitrary Z
+ordering to individual windows (by programming the corresponding blending
+registers), this is currently not supported by the driver. Instead, it will
+assume a fixed Z ordering of the windows (window A is the root window, that
+is, the lowest, while windows B and C are overlaid on top of window A). The
+overlay windows support multiple pixel formats and can automatically convert
+from YUV to RGB at scanout time. This makes them useful for displaying video
+content. In KMS, each window is modelled as a plane. Each display controller
+has a hardware cursor that is exposed as a cursor plane.
+
+Outputs
+-------
+
+The type and number of supported outputs varies between Tegra SoC generations.
+All generations support at least HDMI. While earlier generations supported the
+very simple RGB interfaces (one per display controller), recent generations no
+longer do and instead provide standard interfaces such as DSI and eDP/DP.
+
+Outputs are modelled as a composite encoder/connector pair.
+
+RGB/LVDS
+~~~~~~~~
+
+This interface is no longer available since Tegra124. It has been replaced by
+the more standard DSI and eDP interfaces.
+
+HDMI
+~~~~
+
+HDMI is supported on all Tegra SoCs. Starting with Tegra210, HDMI is provided
+by the versatile SOR output, which supports eDP, DP and HDMI. The SOR is able
+to support HDMI 2.0, though support for this is currently not merged.
+
+DSI
+~~~
+
+Although Tegra has supported DSI since Tegra30, the controller has changed in
+several ways in Tegra114. Since none of the publicly available development
+boards prior to Dalmore (Tegra114) have made use of DSI, only Tegra114 and
+later are supported by the drm/tegra driver.
+
+eDP/DP
+~~~~~~
+
+eDP was first introduced in Tegra124 where it was used to drive the display
+panel for notebook form factors. Tegra210 added support for full DisplayPort
+support, though this is currently not implemented in the drm/tegra driver.
+
+Userspace Interface
+===================
+
+The userspace interface provided by drm/tegra allows applications to create
+GEM buffers, access and control syncpoints as well as submit command streams
+to host1x.
+
+GEM Buffers
+-----------
+
+The ``DRM_IOCTL_TEGRA_GEM_CREATE`` IOCTL is used to create a GEM buffer object
+with Tegra-specific flags. This is useful for buffers that should be tiled, or
+that are to be scanned out upside down (useful for 3D content).
+
+After a GEM buffer object has been created, its memory can be mapped by an
+application using the mmap offset returned by the ``DRM_IOCTL_TEGRA_GEM_MMAP``
+IOCTL.
+
+Syncpoints
+----------
+
+The current value of a syncpoint can be obtained by executing the
+``DRM_IOCTL_TEGRA_SYNCPT_READ`` IOCTL. Incrementing the syncpoint is achieved
+using the ``DRM_IOCTL_TEGRA_SYNCPT_INCR`` IOCTL.
+
+Userspace can also request blocking on a syncpoint. To do so, it needs to
+execute the ``DRM_IOCTL_TEGRA_SYNCPT_WAIT`` IOCTL, specifying the value of
+the syncpoint to wait for. The kernel will release the application when the
+syncpoint reaches that value or after a specified timeout.
+
+Command Stream Submission
+-------------------------
+
+Before an application can submit command streams to host1x it needs to open a
+channel to an engine using the ``DRM_IOCTL_TEGRA_OPEN_CHANNEL`` IOCTL. Client
+IDs are used to identify the target of the channel. When a channel is no
+longer needed, it can be closed using the ``DRM_IOCTL_TEGRA_CLOSE_CHANNEL``
+IOCTL. To retrieve the syncpoint associated with a channel, an application
+can use the ``DRM_IOCTL_TEGRA_GET_SYNCPT``.
+
+After opening a channel, submitting command streams is easy. The application
+writes commands into the memory backing a GEM buffer object and passes these
+to the ``DRM_IOCTL_TEGRA_SUBMIT`` IOCTL along with various other parameters,
+such as the syncpoints or relocations used in the job submission.