Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 360 insertions, 0 deletions

diff --git a/Documentation/hwmon/pmbus-core.rst b/Documentation/hwmon/pmbus-core.rst
new file mode 100644
index 000000000..84c5a4e40
--- /dev/null
+++ b/Documentation/hwmon/pmbus-core.rst
@@ -0,0 +1,360 @@
+==================================
+PMBus core driver and internal API
+==================================
+
+Introduction
+============
+
+[from pmbus.org] The Power Management Bus (PMBus) is an open standard
+power-management protocol with a fully defined command language that facilitates
+communication with power converters and other devices in a power system. The
+protocol is implemented over the industry-standard SMBus serial interface and
+enables programming, control, and real-time monitoring of compliant power
+conversion products. This flexible and highly versatile standard allows for
+communication between devices based on both analog and digital technologies, and
+provides true interoperability which will reduce design complexity and shorten
+time to market for power system designers. Pioneered by leading power supply and
+semiconductor companies, this open power system standard is maintained and
+promoted by the PMBus Implementers Forum (PMBus-IF), comprising 30+ adopters
+with the objective to provide support to, and facilitate adoption among, users.
+
+Unfortunately, while PMBus commands are standardized, there are no mandatory
+commands, and manufacturers can add as many non-standard commands as they like.
+Also, different PMBUs devices act differently if non-supported commands are
+executed. Some devices return an error, some devices return 0xff or 0xffff and
+set a status error flag, and some devices may simply hang up.
+
+Despite all those difficulties, a generic PMBus device driver is still useful
+and supported since kernel version 2.6.39. However, it was necessary to support
+device specific extensions in addition to the core PMBus driver, since it is
+simply unknown what new device specific functionality PMBus device developers
+come up with next.
+
+To make device specific extensions as scalable as possible, and to avoid having
+to modify the core PMBus driver repeatedly for new devices, the PMBus driver was
+split into core, generic, and device specific code. The core code (in
+pmbus_core.c) provides generic functionality. The generic code (in pmbus.c)
+provides support for generic PMBus devices. Device specific code is responsible
+for device specific initialization and, if needed, maps device specific
+functionality into generic functionality. This is to some degree comparable
+to PCI code, where generic code is augmented as needed with quirks for all kinds
+of devices.
+
+PMBus device capabilities auto-detection
+========================================
+
+For generic PMBus devices, code in pmbus.c attempts to auto-detect all supported
+PMBus commands. Auto-detection is somewhat limited, since there are simply too
+many variables to consider. For example, it is almost impossible to autodetect
+which PMBus commands are paged and which commands are replicated across all
+pages (see the PMBus specification for details on multi-page PMBus devices).
+
+For this reason, it often makes sense to provide a device specific driver if not
+all commands can be auto-detected. The data structures in this driver can be
+used to inform the core driver about functionality supported by individual
+chips.
+
+Some commands are always auto-detected. This applies to all limit commands
+(lcrit, min, max, and crit attributes) as well as associated alarm attributes.
+Limits and alarm attributes are auto-detected because there are simply too many
+possible combinations to provide a manual configuration interface.
+
+PMBus internal API
+==================
+
+The API between core and device specific PMBus code is defined in
+drivers/hwmon/pmbus/pmbus.h. In addition to the internal API, pmbus.h defines
+standard PMBus commands and virtual PMBus commands.
+
+Standard PMBus commands
+-----------------------
+
+Standard PMBus commands (commands values 0x00 to 0xff) are defined in the PMBUs
+specification.
+
+Virtual PMBus commands
+----------------------
+
+Virtual PMBus commands are provided to enable support for non-standard
+functionality which has been implemented by several chip vendors and is thus
+desirable to support.
+
+Virtual PMBus commands start with command value 0x100 and can thus easily be
+distinguished from standard PMBus commands (which can not have values larger
+than 0xff). Support for virtual PMBus commands is device specific and thus has
+to be implemented in device specific code.
+
+Virtual commands are named PMBUS_VIRT_xxx and start with PMBUS_VIRT_BASE. All
+virtual commands are word sized.
+
+There are currently two types of virtual commands.
+
+- READ commands are read-only; writes are either ignored or return an error.
+- RESET commands are read/write. Reading reset registers returns zero
+  (used for detection), writing any value causes the associated history to be
+  reset.
+
+Virtual commands have to be handled in device specific driver code. Chip driver
+code returns non-negative values if a virtual command is supported, or a
+negative error code if not. The chip driver may return -ENODATA or any other
+Linux error code in this case, though an error code other than -ENODATA is
+handled more efficiently and thus preferred. Either case, the calling PMBus
+core code will abort if the chip driver returns an error code when reading
+or writing virtual registers (in other words, the PMBus core code will never
+send a virtual command to a chip).
+
+PMBus driver information
+------------------------
+
+PMBus driver information, defined in struct pmbus_driver_info, is the main means
+for device specific drivers to pass information to the core PMBus driver.
+Specifically, it provides the following information.
+
+- For devices supporting its data in Direct Data Format, it provides coefficients
+  for converting register values into normalized data. This data is usually
+  provided by chip manufacturers in device datasheets.
+- Supported chip functionality can be provided to the core driver. This may be
+  necessary for chips which react badly if non-supported commands are executed,
+  and/or to speed up device detection and initialization.
+- Several function entry points are provided to support overriding and/or
+  augmenting generic command execution. This functionality can be used to map
+  non-standard PMBus commands to standard commands, or to augment standard
+  command return values with device specific information.
+
+PEC Support
+===========
+
+Many PMBus devices support SMBus PEC (Packet Error Checking). If supported
+by both the I2C adapter and by the PMBus chip, it is by default enabled.
+If PEC is supported, the PMBus core driver adds an attribute named 'pec' to
+the I2C device. This attribute can be used to control PEC support in the
+communication with the PMBus chip.
+
+API functions
+=============
+
+Functions provided by chip driver
+---------------------------------
+
+All functions return the command return value (read) or zero (write) if
+successful. A return value of -ENODATA indicates that there is no manufacturer
+specific command, but that a standard PMBus command may exist. Any other
+negative return value indicates that the commands does not exist for this
+chip, and that no attempt should be made to read or write the standard
+command.
+
+As mentioned above, an exception to this rule applies to virtual commands,
+which *must* be handled in driver specific code. See "Virtual PMBus Commands"
+above for more details.
+
+Command execution in the core PMBus driver code is as follows::
+
+	if (chip_access_function) {
+		status = chip_access_function();
+		if (status != -ENODATA)
+			return status;
+	}
+	if (command >= PMBUS_VIRT_BASE)	/* For word commands/registers only */
+		return -EINVAL;
+	return generic_access();
+
+Chip drivers may provide pointers to the following functions in struct
+pmbus_driver_info. All functions are optional.
+
+::
+
+  int (*read_byte_data)(struct i2c_client *client, int page, int reg);
+
+Read byte from page <page>, register <reg>.
+<page> may be -1, which means "current page".
+
+
+::
+
+  int (*read_word_data)(struct i2c_client *client, int page, int phase,
+                        int reg);
+
+Read word from page <page>, phase <pase>, register <reg>. If the chip does not
+support multiple phases, the phase parameter can be ignored. If the chip
+supports multiple phases, a phase value of 0xff indicates all phases.
+
+::
+
+  int (*write_word_data)(struct i2c_client *client, int page, int reg,
+			 u16 word);
+
+Write word to page <page>, register <reg>.
+
+::
+
+  int (*write_byte)(struct i2c_client *client, int page, u8 value);
+
+Write byte to page <page>, register <reg>.
+<page> may be -1, which means "current page".
+
+::
+
+  int (*identify)(struct i2c_client *client, struct pmbus_driver_info *info);
+
+Determine supported PMBus functionality. This function is only necessary
+if a chip driver supports multiple chips, and the chip functionality is not
+pre-determined. It is currently only used by the generic pmbus driver
+(pmbus.c).
+
+Functions exported by core driver
+---------------------------------
+
+Chip drivers are expected to use the following functions to read or write
+PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C
+commands are used, the chip driver code must not directly modify the current
+page, since the selected page is cached in the core driver and the core driver
+will assume that it is selected. Using pmbus_set_page() to select a new page
+is mandatory.
+
+::
+
+  int pmbus_set_page(struct i2c_client *client, u8 page, u8 phase);
+
+Set PMBus page register to <page> and <phase> for subsequent commands.
+If the chip does not support multiple phases, the phase parameter is
+ignored. Otherwise, a phase value of 0xff selects all phases.
+
+::
+
+  int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 phase,
+                           u8 reg);
+
+Read word data from <page>, <phase>, <reg>. Similar to
+i2c_smbus_read_word_data(), but selects page and phase first. If the chip does
+not support multiple phases, the phase parameter is ignored. Otherwise, a phase
+value of 0xff selects all phases.
+
+::
+
+  int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
+			    u16 word);
+
+Write word data to <page>, <reg>. Similar to i2c_smbus_write_word_data(), but
+selects page first.
+
+::
+
+  int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
+
+Read byte data from <page>, <reg>. Similar to i2c_smbus_read_byte_data(), but
+selects page first. <page> may be -1, which means "current page".
+
+::
+
+  int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+
+Write byte data to <page>, <reg>. Similar to i2c_smbus_write_byte(), but
+selects page first. <page> may be -1, which means "current page".
+
+::
+
+  void pmbus_clear_faults(struct i2c_client *client);
+
+Execute PMBus "Clear Fault" command on all chip pages.
+This function calls the device specific write_byte function if defined.
+Therefore, it must _not_ be called from that function.
+
+::
+
+  bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+
+Check if byte register exists. Return true if the register exists, false
+otherwise.
+This function calls the device specific write_byte function if defined to
+obtain the chip status. Therefore, it must _not_ be called from that function.
+
+::
+
+  bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+
+Check if word register exists. Return true if the register exists, false
+otherwise.
+This function calls the device specific write_byte function if defined to
+obtain the chip status. Therefore, it must _not_ be called from that function.
+
+::
+
+  int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info);
+
+Execute probe function. Similar to standard probe function for other drivers,
+with the pointer to struct pmbus_driver_info as additional argument. Calls
+identify function if supported. Must only be called from device probe
+function.
+
+::
+
+  const struct pmbus_driver_info
+	*pmbus_get_driver_info(struct i2c_client *client);
+
+Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe().
+
+
+PMBus driver platform data
+==========================
+
+PMBus platform data is defined in include/linux/pmbus.h. Platform data
+currently provides a flags field with four bits used::
+
+	#define PMBUS_SKIP_STATUS_CHECK			BIT(0)
+
+	#define PMBUS_WRITE_PROTECTED			BIT(1)
+
+	#define PMBUS_NO_CAPABILITY			BIT(2)
+
+	#define PMBUS_READ_STATUS_AFTER_FAILED_CHECK	BIT(3)
+
+	struct pmbus_platform_data {
+		u32 flags;              /* Device specific flags */
+
+		/* regulator support */
+		int num_regulators;
+		struct regulator_init_data *reg_init_data;
+	};
+
+
+Flags
+-----
+
+PMBUS_SKIP_STATUS_CHECK
+
+During register detection, skip checking the status register for
+communication or command errors.
+
+Some PMBus chips respond with valid data when trying to read an unsupported
+register. For such chips, checking the status register is mandatory when
+trying to determine if a chip register exists or not.
+Other PMBus chips don't support the STATUS_CML register, or report
+communication errors for no explicable reason. For such chips, checking the
+status register must be disabled.
+
+Some i2c controllers do not support single-byte commands (write commands with
+no data, i2c_smbus_write_byte()). With such controllers, clearing the status
+register is impossible, and the PMBUS_SKIP_STATUS_CHECK flag must be set.
+
+PMBUS_WRITE_PROTECTED
+
+Set if the chip is write protected and write protection is not determined
+by the standard WRITE_PROTECT command.
+
+PMBUS_NO_CAPABILITY
+
+Some PMBus chips don't respond with valid data when reading the CAPABILITY
+register. For such chips, this flag should be set so that the PMBus core
+driver doesn't use CAPABILITY to determine it's behavior.
+
+PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+
+Read the STATUS register after each failed register check.
+
+Some PMBus chips end up in an undefined state when trying to read an
+unsupported register. For such chips, it is necessary to reset the
+chip pmbus controller to a known state after a failed register check.
+This can be done by reading a known register. By setting this flag the
+driver will try to read the STATUS register after each failed
+register check. This read may fail, but it will put the chip into a
+known state.