Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 381 insertions, 0 deletions

diff --git a/Documentation/input/devices/iforce-protocol.rst b/Documentation/input/devices/iforce-protocol.rst
new file mode 100644
index 000000000..8634beac3
--- /dev/null
+++ b/Documentation/input/devices/iforce-protocol.rst
@@ -0,0 +1,381 @@
+===============
+Iforce Protocol
+===============
+
+:Author: Johann Deneux <johann.deneux@gmail.com>
+
+Home page at `<http://web.archive.org/web/*/http://www.esil.univ-mrs.fr>`_
+
+:Additions: by Vojtech Pavlik.
+
+
+Introduction
+============
+
+This document describes what I managed to discover about the protocol used to
+specify force effects to I-Force 2.0 devices.  None of this information comes
+from Immerse. That's why you should not trust what is written in this
+document. This document is intended to help understanding the protocol.
+This is not a reference. Comments and corrections are welcome.  To contact me,
+send an email to: johann.deneux@gmail.com
+
+.. warning::
+
+    I shall not be held responsible for any damage or harm caused if you try to
+    send data to your I-Force device based on what you read in this document.
+
+Preliminary Notes
+=================
+
+All values are hexadecimal with big-endian encoding (msb on the left). Beware,
+values inside packets are encoded using little-endian.  Bytes whose roles are
+unknown are marked ???  Information that needs deeper inspection is marked (?)
+
+General form of a packet
+------------------------
+
+This is how packets look when the device uses the rs232 to communicate.
+
+== == === ==== ==
+2B OP LEN DATA CS
+== == === ==== ==
+
+CS is the checksum. It is equal to the exclusive or of all bytes.
+
+When using USB:
+
+== ====
+OP DATA
+== ====
+
+The 2B, LEN and CS fields have disappeared, probably because USB handles
+frames and data corruption is handled or unsignificant.
+
+First, I describe effects that are sent by the device to the computer
+
+Device input state
+==================
+
+This packet is used to indicate the state of each button and the value of each
+axis::
+
+    OP= 01 for a joystick, 03 for a wheel
+    LEN= Varies from device to device
+    00 X-Axis lsb
+    01 X-Axis msb
+    02 Y-Axis lsb, or gas pedal for a wheel
+    03 Y-Axis msb, or brake pedal for a wheel
+    04 Throttle
+    05 Buttons
+    06 Lower 4 bits: Buttons
+       Upper 4 bits: Hat
+    07 Rudder
+
+Device effects states
+=====================
+
+::
+
+    OP= 02
+    LEN= Varies
+    00 ? Bit 1 (Value 2) is the value of the deadman switch
+    01 Bit 8 is set if the effect is playing. Bits 0 to 7 are the effect id.
+    02 ??
+    03 Address of parameter block changed (lsb)
+    04 Address of parameter block changed (msb)
+    05 Address of second parameter block changed (lsb)
+    ... depending on the number of parameter blocks updated
+
+Force effect
+------------
+
+::
+
+    OP=  01
+    LEN= 0e
+    00 Channel (when playing several effects at the same time, each must
+                be assigned a channel)
+    01 Wave form
+	    Val 00 Constant
+	    Val 20 Square
+	    Val 21 Triangle
+	    Val 22 Sine
+	    Val 23 Sawtooth up
+	    Val 24 Sawtooth down
+	    Val 40 Spring (Force = f(pos))
+	    Val 41 Friction (Force = f(velocity)) and Inertia
+	           (Force = f(acceleration))
+
+
+    02 Axes affected and trigger
+	    Bits 4-7: Val 2 = effect along one axis. Byte 05 indicates direction
+		    Val 4 = X axis only. Byte 05 must contain 5a
+		    Val 8 = Y axis only. Byte 05 must contain b4
+		    Val c = X and Y axes. Bytes 05 must contain 60
+	    Bits 0-3: Val 0 = No trigger
+		    Val x+1 = Button x triggers the effect
+	    When the whole byte is 0, cancel the previously set trigger
+
+    03-04 Duration of effect (little endian encoding, in ms)
+
+    05 Direction of effect, if applicable. Else, see 02 for value to assign.
+
+    06-07 Minimum time between triggering.
+
+    08-09 Address of periodicity or magnitude parameters
+    0a-0b Address of attack and fade parameters, or ffff if none.
+    *or*
+    08-09 Address of interactive parameters for X-axis,
+          or ffff if not applicable
+    0a-0b Address of interactive parameters for Y-axis,
+	  or ffff if not applicable
+
+    0c-0d Delay before execution of effect (little endian encoding, in ms)
+
+
+Time based parameters
+---------------------
+
+Attack and fade
+^^^^^^^^^^^^^^^
+
+::
+
+    OP=  02
+    LEN= 08
+    00-01 Address where to store the parameters
+    02-03 Duration of attack (little endian encoding, in ms)
+    04 Level at end of attack. Signed byte.
+    05-06 Duration of fade.
+    07 Level at end of fade.
+
+Magnitude
+^^^^^^^^^
+
+::
+
+    OP=  03
+    LEN= 03
+    00-01 Address
+    02 Level. Signed byte.
+
+Periodicity
+^^^^^^^^^^^
+
+::
+
+    OP=  04
+    LEN= 07
+    00-01 Address
+    02 Magnitude. Signed byte.
+    03 Offset. Signed byte.
+    04 Phase. Val 00 = 0 deg, Val 40 = 90 degs.
+    05-06 Period (little endian encoding, in ms)
+
+Interactive parameters
+----------------------
+
+::
+
+    OP=  05
+    LEN= 0a
+    00-01 Address
+    02 Positive Coeff
+    03 Negative Coeff
+    04+05 Offset (center)
+    06+07 Dead band (Val 01F4 = 5000 (decimal))
+    08 Positive saturation (Val 0a = 1000 (decimal) Val 64 = 10000 (decimal))
+    09 Negative saturation
+
+The encoding is a bit funny here: For coeffs, these are signed values. The
+maximum value is 64 (100 decimal), the min is 9c.
+For the offset, the minimum value is FE0C, the maximum value is 01F4.
+For the deadband, the minimum value is 0, the max is 03E8.
+
+Controls
+--------
+
+::
+
+    OP=  41
+    LEN= 03
+    00 Channel
+    01 Start/Stop
+	    Val 00: Stop
+	    Val 01: Start and play once.
+	    Val 41: Start and play n times (See byte 02 below)
+    02 Number of iterations n.
+
+Init
+----
+
+
+Querying features
+^^^^^^^^^^^^^^^^^
+::
+
+    OP=  ff
+    Query command. Length varies according to the query type.
+    The general format of this packet is:
+    ff 01 QUERY [INDEX] CHECKSUM
+    responses are of the same form:
+    FF LEN QUERY VALUE_QUERIED CHECKSUM2
+    where LEN = 1 + length(VALUE_QUERIED)
+
+Query ram size
+~~~~~~~~~~~~~~
+
+::
+
+    QUERY = 42 ('B'uffer size)
+
+The device should reply with the same packet plus two additional bytes
+containing the size of the memory:
+ff 03 42 03 e8 CS would mean that the device has 1000 bytes of ram available.
+
+Query number of effects
+~~~~~~~~~~~~~~~~~~~~~~~
+
+::
+
+    QUERY = 4e ('N'umber of effects)
+
+The device should respond by sending the number of effects that can be played
+at the same time (one byte)
+ff 02 4e 14 CS would stand for 20 effects.
+
+Vendor's id
+~~~~~~~~~~~
+
+::
+
+    QUERY = 4d ('M'anufacturer)
+
+Query the vendors'id (2 bytes)
+
+Product id
+~~~~~~~~~~
+
+::
+
+    QUERY = 50 ('P'roduct)
+
+Query the product id (2 bytes)
+
+Open device
+~~~~~~~~~~~
+
+::
+
+    QUERY = 4f ('O'pen)
+
+No data returned.
+
+Close device
+~~~~~~~~~~~~
+
+::
+
+    QUERY = 43 ('C')lose
+
+No data returned.
+
+Query effect
+~~~~~~~~~~~~
+
+::
+
+    QUERY = 45 ('E')
+
+Send effect type.
+Returns nonzero if supported (2 bytes)
+
+Firmware Version
+~~~~~~~~~~~~~~~~
+
+::
+
+    QUERY = 56 ('V'ersion)
+
+Sends back 3 bytes - major, minor, subminor
+
+Initialisation of the device
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Set Control
+~~~~~~~~~~~
+
+.. note::
+    Device dependent, can be different on different models!
+
+::
+
+    OP=  40 <idx> <val> [<val>]
+    LEN= 2 or 3
+    00 Idx
+       Idx 00 Set dead zone (0..2048)
+       Idx 01 Ignore Deadman sensor (0..1)
+       Idx 02 Enable comm watchdog (0..1)
+       Idx 03 Set the strength of the spring (0..100)
+       Idx 04 Enable or disable the spring (0/1)
+       Idx 05 Set axis saturation threshold (0..2048)
+
+Set Effect State
+~~~~~~~~~~~~~~~~
+
+::
+
+    OP=  42 <val>
+    LEN= 1
+    00 State
+       Bit 3 Pause force feedback
+       Bit 2 Enable force feedback
+       Bit 0 Stop all effects
+
+Set overall
+~~~~~~~~~~~
+
+::
+
+    OP=  43 <val>
+    LEN= 1
+    00 Gain
+       Val 00 = 0%
+       Val 40 = 50%
+       Val 80 = 100%
+
+Parameter memory
+----------------
+
+Each device has a certain amount of memory to store parameters of effects.
+The amount of RAM may vary, I encountered values from 200 to 1000 bytes. Below
+is the amount of memory apparently needed for every set of parameters:
+
+ - period : 0c
+ - magnitude : 02
+ - attack and fade : 0e
+ - interactive : 08
+
+Appendix: How to study the protocol?
+====================================
+
+1. Generate effects using the force editor provided with the DirectX SDK, or
+use Immersion Studio (freely available at their web site in the developer section:
+www.immersion.com)
+2. Start a soft spying RS232 or USB (depending on where you connected your
+joystick/wheel). I used ComPortSpy from fCoder (alpha version!)
+3. Play the effect, and watch what happens on the spy screen.
+
+A few words about ComPortSpy:
+At first glance, this software seems, hum, well... buggy. In fact, data appear with a
+few seconds latency. Personally, I restart it every time I play an effect.
+Remember it's free (as in free beer) and alpha!
+
+URLS
+====
+
+Check http://www.immerse.com for Immersion Studio,
+and http://www.fcoder.com for ComPortSpy.
+
+
+I-Force is trademark of Immersion Corp.