Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 225 insertions, 0 deletions

diff --git a/Documentation/input/devices/yealink.rst b/Documentation/input/devices/yealink.rst
new file mode 100644
index 000000000..bb5a1aafe
--- /dev/null
+++ b/Documentation/input/devices/yealink.rst
@@ -0,0 +1,225 @@
+===============================================
+Driver documentation for yealink usb-p1k phones
+===============================================
+
+Status
+======
+
+The p1k is a relatively cheap usb 1.1 phone with:
+
+  - keyboard		full support, yealink.ko / input event API
+  - LCD			full support, yealink.ko / sysfs API
+  - LED			full support, yealink.ko / sysfs API
+  - dialtone		full support, yealink.ko / sysfs API
+  - ringtone		full support, yealink.ko / sysfs API
+  - audio playback   	full support, snd_usb_audio.ko / alsa API
+  - audio record     	full support, snd_usb_audio.ko / alsa API
+
+For vendor documentation see http://www.yealink.com
+
+
+keyboard features
+=================
+
+The current mapping in the kernel is provided by the map_p1k_to_key
+function::
+
+   Physical USB-P1K button layout	input events
+
+
+              up			     up
+        IN           OUT		left,	right
+             down			    down
+
+      pickup   C    hangup		enter, backspace, escape
+        1      2      3			1, 2, 3
+        4      5      6			4, 5, 6,
+        7      8      9			7, 8, 9,
+        *      0      #			*, 0, #,
+
+The "up" and "down" keys, are symbolised by arrows on the button.
+The "pickup" and "hangup" keys are symbolised by a green and red phone
+on the button.
+
+
+LCD features
+============
+
+The LCD is divided and organised as a 3 line display::
+
+    |[]   [][]   [][]   [][]   in   |[][]
+    |[] M [][] D [][] : [][]   out  |[][]
+                              store
+
+    NEW REP         SU MO TU WE TH FR SA
+
+    [] [] [] [] [] [] [] [] [] [] [] []
+    [] [] [] [] [] [] [] [] [] [] [] []
+
+
+  Line 1  Format (see below)	: 18.e8.M8.88...188
+	  Icon names		:   M  D  :  IN OUT STORE
+  Line 2  Format		: .........
+	  Icon name		: NEW REP SU MO TU WE TH FR SA
+  Line 3  Format		: 888888888888
+
+
+Format description:
+  From a userspace perspective the world is separated into "digits" and "icons".
+  A digit can have a character set, an icon can only be ON or OFF.
+
+  Format specifier::
+
+    '8' :  Generic 7 segment digit with individual addressable segments
+
+    Reduced capability 7 segment digit, when segments are hard wired together.
+    '1' : 2 segments digit only able to produce a 1.
+    'e' : Most significant day of the month digit,
+          able to produce at least 1 2 3.
+    'M' : Most significant minute digit,
+          able to produce at least 0 1 2 3 4 5.
+
+    Icons or pictograms:
+    '.' : For example like AM, PM, SU, a 'dot' .. or other single segment
+	  elements.
+
+
+Driver usage
+============
+
+For userland the following interfaces are available using the sysfs interface::
+
+  /sys/.../
+           line1	Read/Write, lcd line1
+           line2	Read/Write, lcd line2
+           line3	Read/Write, lcd line3
+
+	   get_icons    Read, returns a set of available icons.
+	   hide_icon    Write, hide the element by writing the icon name.
+	   show_icon    Write, display the element by writing the icon name.
+
+	   map_seg7	Read/Write, the 7 segments char set, common for all
+			yealink phones. (see map_to_7segment.h)
+
+	   ringtone	Write, upload binary representation of a ringtone,
+			see yealink.c. status EXPERIMENTAL due to potential
+			races between async. and sync usb calls.
+
+
+lineX
+~~~~~
+
+Reading /sys/../lineX will return the format string with its current value.
+
+  Example::
+
+    cat ./line3
+    888888888888
+    Linux Rocks!
+
+Writing to /sys/../lineX will set the corresponding LCD line.
+
+ - Excess characters are ignored.
+ - If less characters are written than allowed, the remaining digits are
+   unchanged.
+ - The tab '\t'and '\n' char does not overwrite the original content.
+ - Writing a space to an icon will always hide its content.
+
+  Example::
+
+    date +"%m.%e.%k:%M"  | sed 's/^0/ /' > ./line1
+
+  Will update the LCD with the current date & time.
+
+
+get_icons
+~~~~~~~~~
+
+Reading will return all available icon names and its current settings::
+
+  cat ./get_icons
+  on M
+  on D
+  on :
+     IN
+     OUT
+     STORE
+     NEW
+     REP
+     SU
+     MO
+     TU
+     WE
+     TH
+     FR
+     SA
+     LED
+     DIALTONE
+     RINGTONE
+
+
+show/hide icons
+~~~~~~~~~~~~~~~
+
+Writing to these files will update the state of the icon.
+Only one icon at a time can be updated.
+
+If an icon is also on a ./lineX the corresponding value is
+updated with the first letter of the icon.
+
+  Example - light up the store icon::
+
+    echo -n "STORE" > ./show_icon
+
+    cat ./line1
+    18.e8.M8.88...188
+		  S
+
+  Example - sound the ringtone for 10 seconds::
+
+    echo -n RINGTONE > /sys/..../show_icon
+    sleep 10
+    echo -n RINGTONE > /sys/..../hide_icon
+
+
+Sound features
+==============
+
+Sound is supported by the ALSA driver: snd_usb_audio
+
+One 16-bit channel with sample and playback rates of 8000 Hz is the practical
+limit of the device.
+
+  Example - recording test::
+
+    arecord -v -d 10 -r 8000 -f S16_LE -t wav  foobar.wav
+
+  Example - playback test::
+
+    aplay foobar.wav
+
+
+Troubleshooting
+===============
+
+:Q: Module yealink compiled and installed without any problem but phone
+    is not initialized and does not react to any actions.
+:A: If you see something like:
+    hiddev0: USB HID v1.00 Device [Yealink Network Technology Ltd. VOIP USB Phone
+    in dmesg, it means that the hid driver has grabbed the device first. Try to
+    load module yealink before any other usb hid driver. Please see the
+    instructions provided by your distribution on module configuration.
+
+:Q: Phone is working now (displays version and accepts keypad input) but I can't
+    find the sysfs files.
+:A: The sysfs files are located on the particular usb endpoint. On most
+    distributions you can do: "find /sys/ -name get_icons" for a hint.
+
+
+Credits & Acknowledgments
+=========================
+
+  - Olivier Vandorpe, for starting the usbb2k-api project doing much of
+    the reverse engineering.
+  - Martin Diehl, for pointing out how to handle USB memory allocation.
+  - Dmitry Torokhov, for the numerous code reviews and suggestions.