Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 209 insertions, 0 deletions

diff --git a/Documentation/m68k/buddha-driver.rst b/Documentation/m68k/buddha-driver.rst
new file mode 100644
index 000000000..20e401413
--- /dev/null
+++ b/Documentation/m68k/buddha-driver.rst
@@ -0,0 +1,209 @@
+=====================================
+Amiga Buddha and Catweasel IDE Driver
+=====================================
+
+The Amiga Buddha and Catweasel IDE Driver (part of ide.c) was written by
+Geert Uytterhoeven based on the following specifications:
+
+------------------------------------------------------------------------
+
+Register map of the Buddha IDE controller and the
+Buddha-part of the Catweasel Zorro-II version
+
+The Autoconfiguration has been implemented just as Commodore
+described  in  their  manuals, no tricks have been used (for
+example leaving some address lines out of the equations...).
+If you want to configure the board yourself (for example let
+a  Linux  kernel  configure the card), look at the Commodore
+Docs.  Reading the nibbles should give this information::
+
+  Vendor number: 4626 ($1212)
+  product number: 0 (42 for Catweasel Z-II)
+  Serial number: 0
+  Rom-vector: $1000
+
+The  card  should be a Z-II board, size 64K, not for freemem
+list, Rom-Vektor is valid, no second Autoconfig-board on the
+same card, no space preference, supports "Shutup_forever".
+
+Setting  the  base address should be done in two steps, just
+as  the Amiga Kickstart does:  The lower nibble of the 8-Bit
+address is written to $4a, then the whole Byte is written to
+$48, while it doesn't matter how often you're writing to $4a
+as  long as $48 is not touched.  After $48 has been written,
+the  whole card disappears from $e8 and is mapped to the new
+address just written.  Make sure $4a is written before $48,
+otherwise your chance is only 1:16 to find the board :-).
+
+The local memory-map is even active when mapped to $e8:
+
+==============  ===========================================
+$0-$7e		Autokonfig-space, see Z-II docs.
+
+$80-$7fd	reserved
+
+$7fe		Speed-select Register: Read & Write
+		(description see further down)
+
+$800-$8ff	IDE-Select 0 (Port 0, Register set 0)
+
+$900-$9ff	IDE-Select 1 (Port 0, Register set 1)
+
+$a00-$aff	IDE-Select 2 (Port 1, Register set 0)
+
+$b00-$bff	IDE-Select 3 (Port 1, Register set 1)
+
+$c00-$cff	IDE-Select 4 (Port 2, Register set 0,
+                Catweasel only!)
+
+$d00-$dff	IDE-Select 5 (Port 3, Register set 1,
+		Catweasel only!)
+
+$e00-$eff	local expansion port, on Catweasel Z-II the
+		Catweasel registers are also mapped here.
+		Never touch, use multidisk.device!
+
+$f00		read only, Byte-access: Bit 7 shows the
+		level of the IRQ-line of IDE port 0.
+
+$f01-$f3f	mirror of $f00
+
+$f40		read only, Byte-access: Bit 7 shows the
+		level of the IRQ-line of IDE port 1.
+
+$f41-$f7f	mirror of $f40
+
+$f80		read only, Byte-access: Bit 7 shows the
+		level of the IRQ-line of IDE port 2.
+		(Catweasel only!)
+
+$f81-$fbf	mirror of $f80
+
+$fc0		write-only: Writing any value to this
+		register enables IRQs to be passed from the
+		IDE ports to the Zorro bus. This mechanism
+		has been implemented to be compatible with
+		harddisks that are either defective or have
+		a buggy firmware and pull the IRQ line up
+		while starting up. If interrupts would
+		always be passed to the bus, the computer
+		might not start up. Once enabled, this flag
+		can not be disabled again. The level of the
+		flag can not be determined by software
+		(what for? Write to me if it's necessary!).
+
+$fc1-$fff	mirror of $fc0
+
+$1000-$ffff	Buddha-Rom with offset $1000 in the rom
+		chip. The addresses $0 to $fff of the rom
+		chip cannot be read. Rom is Byte-wide and
+		mapped to even addresses.
+==============  ===========================================
+
+The  IDE ports issue an INT2.  You can read the level of the
+IRQ-lines  of  the  IDE-ports by reading from the three (two
+for  Buddha-only)  registers  $f00, $f40 and $f80.  This way
+more  than one I/O request can be handled and you can easily
+determine  what  driver  has  to serve the INT2.  Buddha and
+Catweasel  expansion  boards  can issue an INT6.  A separate
+memory  map  is available for the I/O module and the sysop's
+I/O module.
+
+The IDE ports are fed by the address lines A2 to A4, just as
+the  Amiga  1200  and  Amiga  4000  IDE ports are.  This way
+existing  drivers  can be easily ported to Buddha.  A move.l
+polls  two  words  out of the same address of IDE port since
+every  word  is  mirrored  once.  movem is not possible, but
+it's  not  necessary  either,  because  you can only speedup
+68000  systems  with  this  technique.   A 68020 system with
+fastmem is faster with move.l.
+
+If you're using the mirrored registers of the IDE-ports with
+A6=1,  the Buddha doesn't care about the speed that you have
+selected  in  the  speed  register (see further down).  With
+A6=1  (for example $840 for port 0, register set 0), a 780ns
+access  is being made.  These registers should be used for a
+command   access   to  the  harddisk/CD-Rom,  since  command
+accesses  are Byte-wide and have to be made slower according
+to the ATA-X3T9 manual.
+
+Now  for the speed-register:  The register is byte-wide, and
+only  the  upper  three  bits are used (Bits 7 to 5).  Bit 4
+must  always  be set to 1 to be compatible with later Buddha
+versions  (if  I'll  ever  update this one).  I presume that
+I'll  never use the lower four bits, but they have to be set
+to 1 by definition.
+
+The  values in this table have to be shifted 5 bits to the
+left and or'd with $1f (this sets the lower 5 bits).
+
+All  the timings have in common:  Select and IOR/IOW rise at
+the  same  time.   IOR  and  IOW have a propagation delay of
+about  30ns  to  the clocks on the Zorro bus, that's why the
+values  are no multiple of 71.  One clock-cycle is 71ns long
+(exactly 70,5 at 14,18 Mhz on PAL systems).
+
+value 0 (Default after reset)
+  497ns Select (7 clock cycles) , IOR/IOW after 172ns (2 clock cycles)
+  (same timing as the Amiga 1200 does on it's IDE port without
+  accelerator card)
+
+value 1
+  639ns Select (9 clock cycles), IOR/IOW after 243ns (3 clock cycles)
+
+value 2
+  781ns Select (11 clock cycles), IOR/IOW after 314ns (4 clock cycles)
+
+value 3
+  355ns Select (5 clock cycles), IOR/IOW after 101ns (1 clock cycle)
+
+value 4
+  355ns Select (5 clock cycles), IOR/IOW after 172ns (2 clock cycles)
+
+value 5
+  355ns Select (5 clock cycles), IOR/IOW after 243ns (3 clock cycles)
+
+value 6
+  1065ns Select (15 clock cycles), IOR/IOW after 314ns (4 clock cycles)
+
+value 7
+  355ns Select, (5 clock cycles), IOR/IOW after 101ns (1 clock cycle)
+
+When accessing IDE registers with A6=1 (for example $84x),
+the timing will always be mode 0 8-bit compatible, no matter
+what you have selected in the speed register:
+
+781ns select, IOR/IOW after 4 clock cycles (=314ns) aktive.
+
+All  the  timings with a very short select-signal (the 355ns
+fast  accesses)  depend  on the accelerator card used in the
+system:  Sometimes two more clock cycles are inserted by the
+bus  interface,  making  the  whole access 497ns long.  This
+doesn't  affect  the  reliability  of the controller nor the
+performance  of  the  card,  since  this doesn't happen very
+often.
+
+All  the  timings  are  calculated  and  only  confirmed  by
+measurements  that allowed me to count the clock cycles.  If
+the  system  is clocked by an oscillator other than 28,37516
+Mhz  (for  example  the  NTSC-frequency  28,63636 Mhz), each
+clock  cycle is shortened to a bit less than 70ns (not worth
+mentioning).   You  could think of a small performance boost
+by  overclocking  the  system,  but  you would either need a
+multisync  monitor,  or  a  graphics card, and your internal
+diskdrive would go crazy, that's why you shouldn't tune your
+Amiga this way.
+
+Giving  you  the  possibility  to  write  software  that  is
+compatible  with both the Buddha and the Catweasel Z-II, The
+Buddha  acts  just  like  a  Catweasel  Z-II  with no device
+connected  to  the  third  IDE-port.   The IRQ-register $f80
+always  shows a "no IRQ here" on the Buddha, and accesses to
+the  third  IDE  port  are  going into data's Nirwana on the
+Buddha.
+
+Jens Schönfeld february 19th, 1997
+
+updated may 27th, 1997
+
+eMail: sysop@nostlgic.tng.oche.de