Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 178 insertions, 0 deletions

diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
new file mode 100644
index 000000000..e072de60c
--- /dev/null
+++ b/Documentation/maintainer/pull-requests.rst
@@ -0,0 +1,178 @@
+.. _pullrequests:
+
+Creating Pull Requests
+======================
+
+This chapter describes how maintainers can create and submit pull requests
+to other maintainers. This is useful for transferring changes from one
+maintainers tree to another maintainers tree.
+
+This document was written by Tobin C. Harding (who at that time, was not an
+experienced maintainer) primarily from comments made by Greg Kroah-Hartman
+and Linus Torvalds on LKML. Suggestions and fixes by Jonathan Corbet and
+Mauro Carvalho Chehab.  Misrepresentation was unintentional but inevitable,
+please direct abuse to Tobin C. Harding <me@tobin.cc>.
+
+Original email thread::
+
+	https://lore.kernel.org/r/20171114110500.GA21175@kroah.com
+
+
+Create Branch
+-------------
+
+To start with you will need to have all the changes you wish to include in
+the pull request on a separate branch. Typically you will base this branch
+off of a branch in the developers tree whom you intend to send the pull
+request to.
+
+In order to create the pull request you must first tag the branch that you
+have just created. It is recommended that you choose a meaningful tag name,
+in a way that you and others can understand, even after some time.  A good
+practice is to include in the name an indicator of the subsystem of origin
+and the target kernel version.
+
+Greg offers the following. A pull request with miscellaneous stuff for
+drivers/char, to be applied at the Kernel version 4.15-rc1 could be named
+as ``char-misc-4.15-rc1``. If such tag would be produced from a branch
+named ``char-misc-next``, you would be using the following command::
+
+        git tag -s char-misc-4.15-rc1 char-misc-next
+
+that will create a signed tag called ``char-misc-4.15-rc1`` based on the
+last commit in the ``char-misc-next`` branch, and sign it with your gpg key
+(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
+
+Linus will only accept pull requests based on a signed tag. Other
+maintainers may differ.
+
+When you run the above command ``git`` will drop you into an editor and ask
+you to describe the tag.  In this case, you are describing a pull request,
+so outline what is contained here, why it should be merged, and what, if
+any, testing has been done.  All of this information will end up in the tag
+itself, and then in the merge commit that the maintainer makes if/when they
+merge the pull request. So write it up well, as it will be in the kernel
+tree for forever.
+
+As said by Linus::
+
+	Anyway, at least to me, the important part is the *message*. I want
+	to understand what I'm pulling, and why I should pull it. I also
+	want to use that message as the message for the merge, so it should
+	not just make sense to me, but make sense as a historical record
+	too.
+
+	Note that if there is something odd about the pull request, that
+	should very much be in the explanation. If you're touching files
+	that you don't maintain, explain _why_. I will see it in the
+	diffstat anyway, and if you didn't mention it, I'll just be extra
+	suspicious.  And when you send me new stuff after the merge window
+	(or even bug-fixes, but ones that look scary), explain not just
+	what they do and why they do it, but explain the _timing_. What
+	happened that this didn't go through the merge window..
+
+	I will take both what you write in the email pull request _and_ in
+	the signed tag, so depending on your workflow, you can either
+	describe your work in the signed tag (which will also automatically
+	make it into the pull request email), or you can make the signed
+	tag just a placeholder with nothing interesting in it, and describe
+	the work later when you actually send me the pull request.
+
+	And yes, I will edit the message. Partly because I tend to do just
+	trivial formatting (the whole indentation and quoting etc), but
+	partly because part of the message may make sense for me at pull
+	time (describing the conflicts and your personal issues for sending
+	it right now), but may not make sense in the context of a merge
+	commit message, so I will try to make it all make sense. I will
+	also fix any speeling mistaeks and bad grammar I notice,
+	particularly for non-native speakers (but also for native ones
+	;^). But I may miss some, or even add some.
+
+			Linus
+
+Greg gives, as an example pull request::
+
+	Char/Misc patches for 4.15-rc1
+
+	Here is the big char/misc patch set for the 4.15-rc1 merge window.
+	Contained in here is the normal set of new functions added to all
+	of these crazy drivers, as well as the following brand new
+	subsystems:
+		- time_travel_controller: Finally a set of drivers for the
+		  latest time travel bus architecture that provides i/o to
+		  the CPU before it asked for it, allowing uninterrupted
+		  processing
+		- relativity_shifters: due to the affect that the
+		  time_travel_controllers have on the overall system, there
+		  was a need for a new set of relativity shifter drivers to
+		  accommodate the newly formed black holes that would
+		  threaten to suck CPUs into them.  This subsystem handles
+		  this in a way to successfully neutralize the problems.
+		  There is a Kconfig option to force these to be enabled
+		  when needed, so problems should not occur.
+
+	All of these patches have been successfully tested in the latest
+	linux-next releases, and the original problems that it found have
+	all been resolved (apologies to anyone living near Canberra for the
+	lack of the Kconfig options in the earlier versions of the
+	linux-next tree creations.)
+
+	Signed-off-by: Your-name-here <your_email@domain>
+
+
+The tag message format is just like a git commit id.  One line at the top
+for a "summary subject" and be sure to sign-off at the bottom.
+
+Now that you have a local signed tag, you need to push it up to where it
+can be retrieved::
+
+	git push origin char-misc-4.15-rc1
+
+
+Create Pull Request
+-------------------
+
+The last thing to do is create the pull request message.  ``git`` handily
+will do this for you with the ``git request-pull`` command, but it needs a
+bit of help determining what you want to pull, and on what to base the pull
+against (to show the correct changes to be pulled and the diffstat). The
+following command(s) will generate a pull request::
+
+	git request-pull master git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git/ char-misc-4.15-rc1
+
+Quoting Greg::
+
+	This is asking git to compare the difference from the
+	'char-misc-4.15-rc1' tag location, to the head of the 'master'
+	branch (which in my case points to the last location in Linus's
+	tree that I diverged from, usually a -rc release) and to use the
+	git:// protocol to pull from.  If you wish to use https://, that
+	can be used here instead as well (but note that some people behind
+	firewalls will have problems with https git pulls).
+
+	If the char-misc-4.15-rc1 tag is not present in the repo that I am
+	asking to be pulled from, git will complain saying it is not there,
+	a handy way to remember to actually push it to a public location.
+
+	The output of 'git request-pull' will contain the location of the
+	git tree and specific tag to pull from, and the full text
+	description of that tag (which is why you need to provide good
+	information in that tag).  It will also create a diffstat of the
+	pull request, and a shortlog of the individual commits that the
+	pull request will provide.
+
+Linus responded that he tends to prefer the ``git://`` protocol. Other
+maintainers may have different preferences. Also, note that if you are
+creating pull requests without a signed tag then ``https://`` may be a
+better choice. Please see the original thread for the full discussion.
+
+
+Submit Pull Request
+-------------------
+
+A pull request is submitted in the same way as an ordinary patch. Send as
+inline email to the maintainer and CC LKML and any sub-system specific
+lists if required. Pull requests to Linus typically have a subject line
+something like::
+
+	[GIT PULL] <subsystem> changes for v4.15-rc1