Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 189 insertions, 0 deletions

diff --git a/Documentation/mm/page_owner.rst b/Documentation/mm/page_owner.rst
new file mode 100644
index 000000000..127514955
--- /dev/null
+++ b/Documentation/mm/page_owner.rst
@@ -0,0 +1,189 @@
+.. _page_owner:
+
+==================================================
+page owner: Tracking about who allocated each page
+==================================================
+
+Introduction
+============
+
+page owner is for the tracking about who allocated each page.
+It can be used to debug memory leak or to find a memory hogger.
+When allocation happens, information about allocation such as call stack
+and order of pages is stored into certain storage for each page.
+When we need to know about status of all pages, we can get and analyze
+this information.
+
+Although we already have tracepoint for tracing page allocation/free,
+using it for analyzing who allocate each page is rather complex. We need
+to enlarge the trace buffer for preventing overlapping until userspace
+program launched. And, launched program continually dump out the trace
+buffer for later analysis and it would change system behaviour with more
+possibility rather than just keeping it in memory, so bad for debugging.
+
+page owner can also be used for various purposes. For example, accurate
+fragmentation statistics can be obtained through gfp flag information of
+each page. It is already implemented and activated if page owner is
+enabled. Other usages are more than welcome.
+
+page owner is disabled by default. So, if you'd like to use it, you need
+to add "page_owner=on" to your boot cmdline. If the kernel is built
+with page owner and page owner is disabled in runtime due to not enabling
+boot option, runtime overhead is marginal. If disabled in runtime, it
+doesn't require memory to store owner information, so there is no runtime
+memory overhead. And, page owner inserts just two unlikely branches into
+the page allocator hotpath and if not enabled, then allocation is done
+like as the kernel without page owner. These two unlikely branches should
+not affect to allocation performance, especially if the static keys jump
+label patching functionality is available. Following is the kernel's code
+size change due to this facility.
+
+Although enabling page owner increases kernel size by several kilobytes,
+most of this code is outside page allocator and its hot path. Building
+the kernel with page owner and turning it on if needed would be great
+option to debug kernel memory problem.
+
+There is one notice that is caused by implementation detail. page owner
+stores information into the memory from struct page extension. This memory
+is initialized some time later than that page allocator starts in sparse
+memory system, so, until initialization, many pages can be allocated and
+they would have no owner information. To fix it up, these early allocated
+pages are investigated and marked as allocated in initialization phase.
+Although it doesn't mean that they have the right owner information,
+at least, we can tell whether the page is allocated or not,
+more accurately. On 2GB memory x86-64 VM box, 13343 early allocated pages
+are catched and marked, although they are mostly allocated from struct
+page extension feature. Anyway, after that, no page is left in
+un-tracking state.
+
+Usage
+=====
+
+1) Build user-space helper::
+
+	cd tools/vm
+	make page_owner_sort
+
+2) Enable page owner: add "page_owner=on" to boot cmdline.
+
+3) Do the job that you want to debug.
+
+4) Analyze information from page owner::
+
+	cat /sys/kernel/debug/page_owner > page_owner_full.txt
+	./page_owner_sort page_owner_full.txt sorted_page_owner.txt
+
+   The general output of ``page_owner_full.txt`` is as follows::
+
+	Page allocated via order XXX, ...
+	PFN XXX ...
+	// Detailed stack
+
+	Page allocated via order XXX, ...
+	PFN XXX ...
+	// Detailed stack
+    By default, it will do full pfn dump, to start with a given pfn,
+    page_owner supports fseek.
+
+    FILE *fp = fopen("/sys/kernel/debug/page_owner", "r");
+    fseek(fp, pfn_start, SEEK_SET);
+
+   The ``page_owner_sort`` tool ignores ``PFN`` rows, puts the remaining rows
+   in buf, uses regexp to extract the page order value, counts the times
+   and pages of buf, and finally sorts them according to the parameter(s).
+
+   See the result about who allocated each page
+   in the ``sorted_page_owner.txt``. General output::
+
+	XXX times, XXX pages:
+	Page allocated via order XXX, ...
+	// Detailed stack
+
+   By default, ``page_owner_sort`` is sorted according to the times of buf.
+   If you want to sort by the page nums of buf, use the ``-m`` parameter.
+   The detailed parameters are:
+
+   fundamental function::
+
+	Sort:
+		-a		Sort by memory allocation time.
+		-m		Sort by total memory.
+		-p		Sort by pid.
+		-P		Sort by tgid.
+		-n		Sort by task command name.
+		-r		Sort by memory release time.
+		-s		Sort by stack trace.
+		-t		Sort by times (default).
+		--sort <order>	Specify sorting order.  Sorting syntax is [+|-]key[,[+|-]key[,...]].
+				Choose a key from the **STANDARD FORMAT SPECIFIERS** section. The "+" is
+				optional since default direction is increasing numerical or lexicographic
+				order. Mixed use of abbreviated and complete-form of keys is allowed.
+
+		Examples:
+				./page_owner_sort <input> <output> --sort=n,+pid,-tgid
+				./page_owner_sort <input> <output> --sort=at
+
+   additional function::
+
+	Cull:
+		--cull <rules>
+				Specify culling rules.Culling syntax is key[,key[,...]].Choose a
+				multi-letter key from the **STANDARD FORMAT SPECIFIERS** section.
+
+		<rules> is a single argument in the form of a comma-separated list,
+		which offers a way to specify individual culling rules.  The recognized
+		keywords are described in the **STANDARD FORMAT SPECIFIERS** section below.
+		<rules> can be specified by the sequence of keys k1,k2, ..., as described in
+		the STANDARD SORT KEYS section below. Mixed use of abbreviated and
+		complete-form of keys is allowed.
+
+		Examples:
+				./page_owner_sort <input> <output> --cull=stacktrace
+				./page_owner_sort <input> <output> --cull=st,pid,name
+				./page_owner_sort <input> <output> --cull=n,f
+
+	Filter:
+		-f		Filter out the information of blocks whose memory has been released.
+
+	Select:
+		--pid <pidlist>		Select by pid. This selects the blocks whose process ID
+					numbers appear in <pidlist>.
+		--tgid <tgidlist>	Select by tgid. This selects the blocks whose thread
+					group ID numbers appear in <tgidlist>.
+		--name <cmdlist>	Select by task command name. This selects the blocks whose
+					task command name appear in <cmdlist>.
+
+		<pidlist>, <tgidlist>, <cmdlist> are single arguments in the form of a comma-separated list,
+		which offers a way to specify individual selecting rules.
+
+
+		Examples:
+				./page_owner_sort <input> <output> --pid=1
+				./page_owner_sort <input> <output> --tgid=1,2,3
+				./page_owner_sort <input> <output> --name name1,name2
+
+STANDARD FORMAT SPECIFIERS
+==========================
+::
+
+  For --sort option:
+
+	KEY		LONG		DESCRIPTION
+	p		pid		process ID
+	tg		tgid		thread group ID
+	n		name		task command name
+	st		stacktrace	stack trace of the page allocation
+	T		txt		full text of block
+	ft		free_ts		timestamp of the page when it was released
+	at		alloc_ts	timestamp of the page when it was allocated
+	ator		allocator	memory allocator for pages
+
+  For --curl option:
+
+	KEY		LONG		DESCRIPTION
+	p		pid		process ID
+	tg		tgid		thread group ID
+	n		name		task command name
+	f		free		whether the page has been released or not
+	st		stacktrace	stack trace of the page allocation
+	ator		allocator	memory allocator for pages