Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 317 insertions, 0 deletions

diff --git a/Documentation/networking/device_drivers/ethernet/amazon/ena.rst b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
new file mode 100644
index 000000000..8bcb173e0
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/amazon/ena.rst
@@ -0,0 +1,317 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Linux kernel driver for Elastic Network Adapter (ENA) family
+============================================================
+
+Overview
+========
+
+ENA is a networking interface designed to make good use of modern CPU
+features and system architectures.
+
+The ENA device exposes a lightweight management interface with a
+minimal set of memory mapped registers and extendible command set
+through an Admin Queue.
+
+The driver supports a range of ENA devices, is link-speed independent
+(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc), and has
+a negotiated and extendible feature set.
+
+Some ENA devices support SR-IOV. This driver is used for both the
+SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
+
+ENA devices enable high speed and low overhead network traffic
+processing by providing multiple Tx/Rx queue pairs (the maximum number
+is advertised by the device via the Admin Queue), a dedicated MSI-X
+interrupt vector per Tx/Rx queue pair, adaptive interrupt moderation,
+and CPU cacheline optimized data placement.
+
+The ENA driver supports industry standard TCP/IP offload features such as
+checksum offload. Receive-side scaling (RSS) is supported for multi-core
+scaling.
+
+The ENA driver and its corresponding devices implement health
+monitoring mechanisms such as watchdog, enabling the device and driver
+to recover in a manner transparent to the application, as well as
+debug logs.
+
+Some of the ENA devices support a working mode called Low-latency
+Queue (LLQ), which saves several more microseconds.
+ENA Source Code Directory Structure
+===================================
+
+=================   ======================================================
+ena_com.[ch]        Management communication layer. This layer is
+                    responsible for the handling all the management
+                    (admin) communication between the device and the
+                    driver.
+ena_eth_com.[ch]    Tx/Rx data path.
+ena_admin_defs.h    Definition of ENA management interface.
+ena_eth_io_defs.h   Definition of ENA data path interface.
+ena_common_defs.h   Common definitions for ena_com layer.
+ena_regs_defs.h     Definition of ENA PCI memory-mapped (MMIO) registers.
+ena_netdev.[ch]     Main Linux kernel driver.
+ena_ethtool.c       ethtool callbacks.
+ena_pci_id_tbl.h    Supported device IDs.
+=================   ======================================================
+
+Management Interface:
+=====================
+
+ENA management interface is exposed by means of:
+
+- PCIe Configuration Space
+- Device Registers
+- Admin Queue (AQ) and Admin Completion Queue (ACQ)
+- Asynchronous Event Notification Queue (AENQ)
+
+ENA device MMIO Registers are accessed only during driver
+initialization and are not used during further normal device
+operation.
+
+AQ is used for submitting management commands, and the
+results/responses are reported asynchronously through ACQ.
+
+ENA introduces a small set of management commands with room for
+vendor-specific extensions. Most of the management operations are
+framed in a generic Get/Set feature command.
+
+The following admin queue commands are supported:
+
+- Create I/O submission queue
+- Create I/O completion queue
+- Destroy I/O submission queue
+- Destroy I/O completion queue
+- Get feature
+- Set feature
+- Configure AENQ
+- Get statistics
+
+Refer to ena_admin_defs.h for the list of supported Get/Set Feature
+properties.
+
+The Asynchronous Event Notification Queue (AENQ) is a uni-directional
+queue used by the ENA device to send to the driver events that cannot
+be reported using ACQ. AENQ events are subdivided into groups. Each
+group may have multiple syndromes, as shown below
+
+The events are:
+
+====================    ===============
+Group                   Syndrome
+====================    ===============
+Link state change       **X**
+Fatal error             **X**
+Notification            Suspend traffic
+Notification            Resume traffic
+Keep-Alive              **X**
+====================    ===============
+
+ACQ and AENQ share the same MSI-X vector.
+
+Keep-Alive is a special mechanism that allows monitoring the device's health.
+A Keep-Alive event is delivered by the device every second.
+The driver maintains a watchdog (WD) handler which logs the current state and
+statistics. If the keep-alive events aren't delivered as expected the WD resets
+the device and the driver.
+
+Data Path Interface
+===================
+
+I/O operations are based on Tx and Rx Submission Queues (Tx SQ and Rx
+SQ correspondingly). Each SQ has a completion queue (CQ) associated
+with it.
+
+The SQs and CQs are implemented as descriptor rings in contiguous
+physical memory.
+
+The ENA driver supports two Queue Operation modes for Tx SQs:
+
+- **Regular mode:**
+  In this mode the Tx SQs reside in the host's memory. The ENA
+  device fetches the ENA Tx descriptors and packet data from host
+  memory.
+
+- **Low Latency Queue (LLQ) mode or "push-mode":**
+  In this mode the driver pushes the transmit descriptors and the
+  first 96 bytes of the packet directly to the ENA device memory
+  space. The rest of the packet payload is fetched by the
+  device. For this operation mode, the driver uses a dedicated PCI
+  device memory BAR, which is mapped with write-combine capability.
+
+  **Note that** not all ENA devices support LLQ, and this feature is negotiated
+  with the device upon initialization. If the ENA device does not
+  support LLQ mode, the driver falls back to the regular mode.
+
+The Rx SQs support only the regular mode.
+
+The driver supports multi-queue for both Tx and Rx. This has various
+benefits:
+
+- Reduced CPU/thread/process contention on a given Ethernet interface.
+- Cache miss rate on completion is reduced, particularly for data
+  cache lines that hold the sk_buff structures.
+- Increased process-level parallelism when handling received packets.
+- Increased data cache hit rate, by steering kernel processing of
+  packets to the CPU, where the application thread consuming the
+  packet is running.
+- In hardware interrupt re-direction.
+
+Interrupt Modes
+===============
+
+The driver assigns a single MSI-X vector per queue pair (for both Tx
+and Rx directions). The driver assigns an additional dedicated MSI-X vector
+for management (for ACQ and AENQ).
+
+Management interrupt registration is performed when the Linux kernel
+probes the adapter, and it is de-registered when the adapter is
+removed. I/O queue interrupt registration is performed when the Linux
+interface of the adapter is opened, and it is de-registered when the
+interface is closed.
+
+The management interrupt is named::
+
+   ena-mgmnt@pci:<PCI domain:bus:slot.function>
+
+and for each queue pair, an interrupt is named::
+
+   <interface name>-Tx-Rx-<queue index>
+
+The ENA device operates in auto-mask and auto-clear interrupt
+modes. That is, once MSI-X is delivered to the host, its Cause bit is
+automatically cleared and the interrupt is masked. The interrupt is
+unmasked by the driver after NAPI processing is complete.
+
+Interrupt Moderation
+====================
+
+ENA driver and device can operate in conventional or adaptive interrupt
+moderation mode.
+
+**In conventional mode** the driver instructs device to postpone interrupt
+posting according to static interrupt delay value. The interrupt delay
+value can be configured through `ethtool(8)`. The following `ethtool`
+parameters are supported by the driver: ``tx-usecs``, ``rx-usecs``
+
+**In adaptive interrupt** moderation mode the interrupt delay value is
+updated by the driver dynamically and adjusted every NAPI cycle
+according to the traffic nature.
+
+Adaptive coalescing can be switched on/off through `ethtool(8)`'s
+:code:`adaptive_rx on|off` parameter.
+
+More information about Adaptive Interrupt Moderation (DIM) can be found in
+Documentation/networking/net_dim.rst
+
+RX copybreak
+============
+The rx_copybreak is initialized by default to ENA_DEFAULT_RX_COPYBREAK
+and can be configured by the ETHTOOL_STUNABLE command of the
+SIOCETHTOOL ioctl.
+
+Statistics
+==========
+
+The user can obtain ENA device and driver statistics using `ethtool`.
+The driver can collect regular or extended statistics (including
+per-queue stats) from the device.
+
+In addition the driver logs the stats to syslog upon device reset.
+
+MTU
+===
+
+The driver supports an arbitrarily large MTU with a maximum that is
+negotiated with the device. The driver configures MTU using the
+SetFeature command (ENA_ADMIN_MTU property). The user can change MTU
+via `ip(8)` and similar legacy tools.
+
+Stateless Offloads
+==================
+
+The ENA driver supports:
+
+- IPv4 header checksum offload
+- TCP/UDP over IPv4/IPv6 checksum offloads
+
+RSS
+===
+
+- The ENA device supports RSS that allows flexible Rx traffic
+  steering.
+- Toeplitz and CRC32 hash functions are supported.
+- Different combinations of L2/L3/L4 fields can be configured as
+  inputs for hash functions.
+- The driver configures RSS settings using the AQ SetFeature command
+  (ENA_ADMIN_RSS_HASH_FUNCTION, ENA_ADMIN_RSS_HASH_INPUT and
+  ENA_ADMIN_RSS_INDIRECTION_TABLE_CONFIG properties).
+- If the NETIF_F_RXHASH flag is set, the 32-bit result of the hash
+  function delivered in the Rx CQ descriptor is set in the received
+  SKB.
+- The user can provide a hash key, hash function, and configure the
+  indirection table through `ethtool(8)`.
+
+DATA PATH
+=========
+
+Tx
+--
+
+:code:`ena_start_xmit()` is called by the stack. This function does the following:
+
+- Maps data buffers (``skb->data`` and frags).
+- Populates ``ena_buf`` for the push buffer (if the driver and device are
+  in push mode).
+- Prepares ENA bufs for the remaining frags.
+- Allocates a new request ID from the empty ``req_id`` ring. The request
+  ID is the index of the packet in the Tx info. This is used for
+  out-of-order Tx completions.
+- Adds the packet to the proper place in the Tx ring.
+- Calls :code:`ena_com_prepare_tx()`, an ENA communication layer that converts
+  the ``ena_bufs`` to ENA descriptors (and adds meta ENA descriptors as
+  needed).
+
+  * This function also copies the ENA descriptors and the push buffer
+    to the Device memory space (if in push mode).
+
+- Writes a doorbell to the ENA device.
+- When the ENA device finishes sending the packet, a completion
+  interrupt is raised.
+- The interrupt handler schedules NAPI.
+- The :code:`ena_clean_tx_irq()` function is called. This function handles the
+  completion descriptors generated by the ENA, with a single
+  completion descriptor per completed packet.
+
+  * ``req_id`` is retrieved from the completion descriptor. The ``tx_info`` of
+    the packet is retrieved via the ``req_id``. The data buffers are
+    unmapped and ``req_id`` is returned to the empty ``req_id`` ring.
+  * The function stops when the completion descriptors are completed or
+    the budget is reached.
+
+Rx
+--
+
+- When a packet is received from the ENA device.
+- The interrupt handler schedules NAPI.
+- The :code:`ena_clean_rx_irq()` function is called. This function calls
+  :code:`ena_com_rx_pkt()`, an ENA communication layer function, which returns the
+  number of descriptors used for a new packet, and zero if
+  no new packet is found.
+- :code:`ena_rx_skb()` checks packet length:
+
+  * If the packet is small (len < rx_copybreak), the driver allocates
+    a SKB for the new packet, and copies the packet payload into the
+    SKB data buffer.
+
+    - In this way the original data buffer is not passed to the stack
+      and is reused for future Rx packets.
+
+  * Otherwise the function unmaps the Rx buffer, sets the first
+    descriptor as `skb`'s linear part and the other descriptors as the
+    `skb`'s frags.
+
+- The new SKB is updated with the necessary information (protocol,
+  checksum hw verify result, etc), and then passed to the network
+  stack, using the NAPI interface function :code:`napi_gro_receive()`.