Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 194 insertions, 0 deletions

diff --git a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
new file mode 100644
index 000000000..e2a36d0d8
--- /dev/null
+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
@@ -0,0 +1,194 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+=======================
+DPAA2 MAC / PHY support
+=======================
+
+:Copyright: |copy| 2019 NXP
+
+Overview
+--------
+
+The DPAA2 MAC / PHY support consists of a set of APIs that help DPAA2 network
+drivers (dpaa2-eth, dpaa2-ethsw) interact with the PHY library.
+
+DPAA2 Software Architecture
+---------------------------
+
+Among other DPAA2 objects, the fsl-mc bus exports DPNI objects (abstracting a
+network interface) and DPMAC objects (abstracting a MAC). The dpaa2-eth driver
+probes on the DPNI object and connects to and configures a DPMAC object with
+the help of phylink.
+
+Data connections may be established between a DPNI and a DPMAC, or between two
+DPNIs. Depending on the connection type, the netif_carrier_[on/off] is handled
+directly by the dpaa2-eth driver or by phylink.
+
+.. code-block:: none
+
+  Sources of abstracted link state information presented by the MC firmware
+
+                                               +--------------------------------------+
+  +------------+                  +---------+  |                           xgmac_mdio |
+  | net_device |                  | phylink |--|  +-----+  +-----+  +-----+  +-----+  |
+  +------------+                  +---------+  |  | PHY |  | PHY |  | PHY |  | PHY |  |
+        |                             |        |  +-----+  +-----+  +-----+  +-----+  |
+      +------------------------------------+   |                    External MDIO bus |
+      |            dpaa2-eth               |   +--------------------------------------+
+      +------------------------------------+
+        |                             |                                           Linux
+  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+        |                             |                                     MC firmware
+        |              /|             V
+  +----------+        / |       +----------+
+  |          |       /  |       |          |
+  |          |       |  |       |          |
+  |   DPNI   |<------|  |<------|   DPMAC  |
+  |          |       |  |       |          |
+  |          |       \  |<---+  |          |
+  +----------+        \ |    |  +----------+
+                       \|    |
+                             |
+           +--------------------------------------+
+           | MC firmware polling MAC PCS for link |
+           |  +-----+  +-----+  +-----+  +-----+  |
+           |  | PCS |  | PCS |  | PCS |  | PCS |  |
+           |  +-----+  +-----+  +-----+  +-----+  |
+           |                    Internal MDIO bus |
+           +--------------------------------------+
+
+
+Depending on an MC firmware configuration setting, each MAC may be in one of two modes:
+
+- DPMAC_LINK_TYPE_FIXED: the link state management is handled exclusively by
+  the MC firmware by polling the MAC PCS. Without the need to register a
+  phylink instance, the dpaa2-eth driver will not bind to the connected dpmac
+  object at all.
+
+- DPMAC_LINK_TYPE_PHY: The MC firmware is left waiting for link state update
+  events, but those are in fact passed strictly between the dpaa2-mac (based on
+  phylink) and its attached net_device driver (dpaa2-eth, dpaa2-ethsw),
+  effectively bypassing the firmware.
+
+Implementation
+--------------
+
+At probe time or when a DPNI's endpoint is dynamically changed, the dpaa2-eth
+is responsible to find out if the peer object is a DPMAC and if this is the
+case, to integrate it with PHYLINK using the dpaa2_mac_connect() API, which
+will do the following:
+
+ - look up the device tree for PHYLINK-compatible of binding (phy-handle)
+ - will create a PHYLINK instance associated with the received net_device
+ - connect to the PHY using phylink_of_phy_connect()
+
+The following phylink_mac_ops callback are implemented:
+
+ - .validate() will populate the supported linkmodes with the MAC capabilities
+   only when the phy_interface_t is RGMII_* (at the moment, this is the only
+   link type supported by the driver).
+
+ - .mac_config() will configure the MAC in the new configuration using the
+   dpmac_set_link_state() MC firmware API.
+
+ - .mac_link_up() / .mac_link_down() will update the MAC link using the same
+   API described above.
+
+At driver unbind() or when the DPNI object is disconnected from the DPMAC, the
+dpaa2-eth driver calls dpaa2_mac_disconnect() which will, in turn, disconnect
+from the PHY and destroy the PHYLINK instance.
+
+In case of a DPNI-DPMAC connection, an 'ip link set dev eth0 up' would start
+the following sequence of operations:
+
+(1) phylink_start() called from .dev_open().
+(2) The .mac_config() and .mac_link_up() callbacks are called by PHYLINK.
+(3) In order to configure the HW MAC, the MC Firmware API
+    dpmac_set_link_state() is called.
+(4) The firmware will eventually setup the HW MAC in the new configuration.
+(5) A netif_carrier_on() call is made directly from PHYLINK on the associated
+    net_device.
+(6) The dpaa2-eth driver handles the LINK_STATE_CHANGE irq in order to
+    enable/disable Rx taildrop based on the pause frame settings.
+
+.. code-block:: none
+
+  +---------+               +---------+
+  | PHYLINK |-------------->|  eth0   |
+  +---------+           (5) +---------+
+  (1) ^  |
+      |  |
+      |  v (2)
+  +-----------------------------------+
+  |             dpaa2-eth             |
+  +-----------------------------------+
+         |                    ^ (6)
+         |                    |
+         v (3)                |
+  +---------+---------------+---------+
+  |  DPMAC  |               |  DPNI   |
+  +---------+               +---------+
+  |            MC Firmware            |
+  +-----------------------------------+
+         |
+         |
+         v (4)
+  +-----------------------------------+
+  |             HW MAC                |
+  +-----------------------------------+
+
+In case of a DPNI-DPNI connection, a usual sequence of operations looks like
+the following:
+
+(1) ip link set dev eth0 up
+(2) The dpni_enable() MC API called on the associated fsl_mc_device.
+(3) ip link set dev eth1 up
+(4) The dpni_enable() MC API called on the associated fsl_mc_device.
+(5) The LINK_STATE_CHANGED irq is received by both instances of the dpaa2-eth
+    driver because now the operational link state is up.
+(6) The netif_carrier_on() is called on the exported net_device from
+    link_state_update().
+
+.. code-block:: none
+
+  +---------+               +---------+
+  |  eth0   |               |  eth1   |
+  +---------+               +---------+
+      |  ^                     ^  |
+      |  |                     |  |
+  (1) v  | (6)             (6) |  v (3)
+  +---------+               +---------+
+  |dpaa2-eth|               |dpaa2-eth|
+  +---------+               +---------+
+      |  ^                     ^  |
+      |  |                     |  |
+  (2) v  | (5)             (5) |  v (4)
+  +---------+---------------+---------+
+  |  DPNI   |               |  DPNI   |
+  +---------+               +---------+
+  |            MC Firmware            |
+  +-----------------------------------+
+
+
+Exported API
+------------
+
+Any DPAA2 driver that drivers endpoints of DPMAC objects should service its
+_EVENT_ENDPOINT_CHANGED irq and connect/disconnect from the associated DPMAC
+when necessary using the below listed API::
+
+ - int dpaa2_mac_connect(struct dpaa2_mac *mac);
+ - void dpaa2_mac_disconnect(struct dpaa2_mac *mac);
+
+A phylink integration is necessary only when the partner DPMAC is not of
+``TYPE_FIXED``. This means it is either of ``TYPE_PHY``, or of
+``TYPE_BACKPLANE`` (the difference being the two that in the ``TYPE_BACKPLANE``
+mode, the MC firmware does not access the PCS registers). One can check for
+this condition using the following helper::
+
+ - static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac);
+
+Before connection to a MAC, the caller must allocate and populate the
+dpaa2_mac structure with the associated net_device, a pointer to the MC portal
+to be used and the actual fsl_mc_device structure of the DPMAC.