Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 253 insertions, 0 deletions

diff --git a/Documentation/networking/device_drivers/fddi/skfp.rst b/Documentation/networking/device_drivers/fddi/skfp.rst
new file mode 100644
index 000000000..58f548105
--- /dev/null
+++ b/Documentation/networking/device_drivers/fddi/skfp.rst
@@ -0,0 +1,253 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+========================
+SysKonnect driver - SKFP
+========================
+
+|copy| Copyright 1998-2000 SysKonnect,
+
+skfp.txt created 11-May-2000
+
+Readme File for skfp.o v2.06
+
+
+.. This file contains
+
+   (1) OVERVIEW
+   (2) SUPPORTED ADAPTERS
+   (3) GENERAL INFORMATION
+   (4) INSTALLATION
+   (5) INCLUSION OF THE ADAPTER IN SYSTEM START
+   (6) TROUBLESHOOTING
+   (7) FUNCTION OF THE ADAPTER LEDS
+   (8) HISTORY
+
+
+1. Overview
+===========
+
+This README explains how to use the driver 'skfp' for Linux with your
+network adapter.
+
+Chapter 2: Contains a list of all network adapters that are supported by
+this driver.
+
+Chapter 3:
+	   Gives some general information.
+
+Chapter 4: Describes common problems and solutions.
+
+Chapter 5: Shows the changed functionality of the adapter LEDs.
+
+Chapter 6: History of development.
+
+
+2. Supported adapters
+=====================
+
+The network driver 'skfp' supports the following network adapters:
+SysKonnect adapters:
+
+  - SK-5521 (SK-NET FDDI-UP)
+  - SK-5522 (SK-NET FDDI-UP DAS)
+  - SK-5541 (SK-NET FDDI-FP)
+  - SK-5543 (SK-NET FDDI-LP)
+  - SK-5544 (SK-NET FDDI-LP DAS)
+  - SK-5821 (SK-NET FDDI-UP64)
+  - SK-5822 (SK-NET FDDI-UP64 DAS)
+  - SK-5841 (SK-NET FDDI-FP64)
+  - SK-5843 (SK-NET FDDI-LP64)
+  - SK-5844 (SK-NET FDDI-LP64 DAS)
+
+Compaq adapters (not tested):
+
+  - Netelligent 100 FDDI DAS Fibre SC
+  - Netelligent 100 FDDI SAS Fibre SC
+  - Netelligent 100 FDDI DAS UTP
+  - Netelligent 100 FDDI SAS UTP
+  - Netelligent 100 FDDI SAS Fibre MIC
+
+
+3. General Information
+======================
+
+From v2.01 on, the driver is integrated in the linux kernel sources.
+Therefore, the installation is the same as for any other adapter
+supported by the kernel.
+
+Refer to the manual of your distribution about the installation
+of network adapters.
+
+Makes my life much easier :-)
+
+4. Troubleshooting
+==================
+
+If you run into problems during installation, check those items:
+
+Problem:
+	  The FDDI adapter cannot be found by the driver.
+
+Reason:
+	  Look in /proc/pci for the following entry:
+
+	     'FDDI network controller: SysKonnect SK-FDDI-PCI ...'
+
+	  If this entry exists, then the FDDI adapter has been
+	  found by the system and should be able to be used.
+
+	  If this entry does not exist or if the file '/proc/pci'
+	  is not there, then you may have a hardware problem or PCI
+	  support may not be enabled in your kernel.
+
+	  The adapter can be checked using the diagnostic program
+	  which is available from the SysKonnect web site:
+
+	      www.syskonnect.de
+
+	  Some COMPAQ machines have a problem with PCI under
+	  Linux. This is described in the 'PCI howto' document
+	  (included in some distributions or available from the
+	  www, e.g. at 'www.linux.org') and no workaround is available.
+
+Problem:
+	  You want to use your computer as a router between
+	  multiple IP subnetworks (using multiple adapters), but
+	  you cannot reach computers in other subnetworks.
+
+Reason:
+	  Either the router's kernel is not configured for IP
+	  forwarding or there is a problem with the routing table
+	  and gateway configuration in at least one of the
+	  computers.
+
+If your problem is not listed here, please contact our
+technical support for help.
+
+You can send email to: linux@syskonnect.de
+
+When contacting our technical support,
+please ensure that the following information is available:
+
+- System Manufacturer and Model
+- Boards in your system
+- Distribution
+- Kernel version
+
+
+5. Function of the Adapter LEDs
+===============================
+
+	The functionality of the LED's on the FDDI network adapters was
+	changed in SMT version v2.82. With this new SMT version, the yellow
+	LED works as a ring operational indicator. An active yellow LED
+	indicates that the ring is down. The green LED on the adapter now
+	works as a link indicator where an active GREEN LED indicates that
+	the respective port has a physical connection.
+
+	With versions of SMT prior to v2.82 a ring up was indicated if the
+	yellow LED was off while the green LED(s) showed the connection
+	status of the adapter. During a ring down the green LED was off and
+	the yellow LED was on.
+
+	All implementations indicate that a driver is not loaded if
+	all LEDs are off.
+
+
+6. History
+==========
+
+v2.06 (20000511) (In-Kernel version)
+    New features:
+
+	- 64 bit support
+	- new pci dma interface
+	- in kernel 2.3.99
+
+v2.05 (20000217) (In-Kernel version)
+    New features:
+
+	- Changes for 2.3.45 kernel
+
+v2.04 (20000207) (Standalone version)
+    New features:
+
+	- Added rx/tx byte counter
+
+v2.03 (20000111) (Standalone version)
+    Problems fixed:
+
+	- Fixed printk statements from v2.02
+
+v2.02 (991215) (Standalone version)
+    Problems fixed:
+
+	- Removed unnecessary output
+	- Fixed path for "printver.sh" in makefile
+
+v2.01 (991122) (In-Kernel version)
+    New features:
+
+	- Integration in Linux kernel sources
+	- Support for memory mapped I/O.
+
+v2.00 (991112)
+    New features:
+
+	- Full source released under GPL
+
+v1.05 (991023)
+    Problems fixed:
+
+	- Compilation with kernel version 2.2.13 failed
+
+v1.04 (990427)
+    Changes:
+
+	- New SMT module included, changing LED functionality
+
+    Problems fixed:
+
+	- Synchronization on SMP machines was buggy
+
+v1.03 (990325)
+    Problems fixed:
+
+	- Interrupt routing on SMP machines could be incorrect
+
+v1.02 (990310)
+    New features:
+
+	- Support for kernel versions 2.2.x added
+	- Kernel patch instead of private duplicate of kernel functions
+
+v1.01 (980812)
+    Problems fixed:
+
+	Connection hangup with telnet
+	Slow telnet connection
+
+v1.00 beta 01 (980507)
+    New features:
+
+	None.
+
+    Problems fixed:
+
+	None.
+
+    Known limitations:
+
+	- tar archive instead of standard package format (rpm).
+	- FDDI statistic is empty.
+	- not tested with 2.1.xx kernels
+	- integration in kernel not tested
+	- not tested simultaneously with FDDI adapters from other vendors.
+	- only X86 processors supported.
+	- SBA (Synchronous Bandwidth Allocator) parameters can
+	  not be configured.
+	- does not work on some COMPAQ machines. See the PCI howto
+	  document for details about this problem.
+	- data corruption with kernel versions below 2.0.33.