Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 165 insertions, 0 deletions

diff --git a/Documentation/networking/device_drivers/wifi/ray_cs.rst b/Documentation/networking/device_drivers/wifi/ray_cs.rst
new file mode 100644
index 000000000..9a46d1ae8
--- /dev/null
+++ b/Documentation/networking/device_drivers/wifi/ray_cs.rst
@@ -0,0 +1,165 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: <isonum.txt>
+
+=========================
+Raylink wireless LAN card
+=========================
+
+September 21, 1999
+
+Copyright |copy| 1998  Corey Thomas (corey@world.std.com)
+
+This file is the documentation for the Raylink Wireless LAN card driver for
+Linux.  The Raylink wireless LAN card is a PCMCIA card which provides IEEE
+802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
+See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
+card.  This driver is in early development and does have bugs.  See the known
+bugs and limitations at the end of this document for more information.
+This driver also works with WebGear's Aviator 2.4 and Aviator Pro
+wireless LAN cards.
+
+As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
+source.  My web page for the development of ray_cs is at
+http://web.ralinktech.com/ralink/Home/Support/Linux.html
+and I can be emailed at corey@world.std.com
+
+The kernel driver is based on ray_cs-1.62.tgz
+
+The driver at my web page is intended to be used as an add on to
+David Hinds pcmcia package.  All the command line parameters are
+available when compiled as a module.  When built into the kernel, only
+the essid= string parameter is available via the kernel command line.
+This will change after the method of sorting out parameters for all
+the PCMCIA drivers is agreed upon.  If you must have a built in driver
+with nondefault parameters, they can be edited in
+/usr/src/linux/drivers/net/pcmcia/ray_cs.c.  Searching for module_param
+will find them all.
+
+Information on card services is available at:
+
+	http://pcmcia-cs.sourceforge.net/
+
+
+Card services user programs are still required for PCMCIA devices.
+pcmcia-cs-3.1.1 or greater is required for the kernel version of
+the driver.
+
+Currently, ray_cs is not part of David Hinds card services package,
+so the following magic is required.
+
+At the end of the /etc/pcmcia/config.opts file, add the line:
+source ./ray_cs.opts
+This will make card services read the ray_cs.opts file
+when starting.  Create the file /etc/pcmcia/ray_cs.opts containing the
+following::
+
+  #### start of /etc/pcmcia/ray_cs.opts ###################
+  # Configuration options for Raylink Wireless LAN PCMCIA card
+  device "ray_cs"
+    class "network" module "misc/ray_cs"
+
+  card "RayLink PC Card WLAN Adapter"
+    manfid 0x01a6, 0x0000
+    bind "ray_cs"
+
+  module "misc/ray_cs" opts ""
+  #### end of /etc/pcmcia/ray_cs.opts #####################
+
+
+To join an existing network with
+different parameters, contact the network administrator for the
+configuration information, and edit /etc/pcmcia/ray_cs.opts.
+Add the parameters below between the empty quotes.
+
+Parameters for ray_cs driver which may be specified in ray_cs.opts:
+
+=============== =============== =============================================
+bc              integer         0 = normal mode (802.11 timing),
+				1 = slow down inter frame timing to allow
+				operation with older breezecom access
+				points.
+
+beacon_period	integer         beacon period in Kilo-microseconds,
+
+				legal values = must be integer multiple
+				of hop dwell
+
+				default = 256
+
+country         integer         1 = USA (default),
+				2 = Europe,
+				3 = Japan,
+				4 = Korea,
+				5 = Spain,
+				6 = France,
+				7 = Israel,
+				8 = Australia
+
+essid		string		ESS ID - network name to join
+
+				string with maximum length of 32 chars
+				default value = "ADHOC_ESSID"
+
+hop_dwell	integer         hop dwell time in Kilo-microseconds
+
+				legal values = 16,32,64,128(default),256
+
+irq_mask	integer         linux standard 16 bit value 1bit/IRQ
+
+				lsb is IRQ 0, bit 1 is IRQ 1 etc.
+				Used to restrict choice of IRQ's to use.
+				Recommended method for controlling
+				interrupts is in /etc/pcmcia/config.opts
+
+net_type	integer		0 (default) = adhoc network,
+				1 = infrastructure
+
+phy_addr	string          string containing new MAC address in
+				hex, must start with x eg
+				x00008f123456
+
+psm		integer         0 = continuously active,
+				1 = power save mode (not useful yet)
+
+pc_debug	integer		(0-5) larger values for more verbose
+				logging.  Replaces ray_debug.
+
+ray_debug	integer		Replaced with pc_debug
+
+ray_mem_speed   integer         defaults to 500
+
+sniffer         integer         0 = not sniffer (default),
+				1 = sniffer which can be used to record all
+				network traffic using tcpdump or similar,
+				but no normal network use is allowed.
+
+translate	integer		0 = no translation (encapsulate frames),
+				1 = translation    (RFC1042/802.1)
+=============== =============== =============================================
+
+More on sniffer mode:
+
+tcpdump does not understand 802.11 headers, so it can't
+interpret the contents, but it can record to a file.  This is only
+useful for debugging 802.11 lowlevel protocols that are not visible to
+linux.  If you want to watch ftp xfers, or do similar things, you
+don't need to use sniffer mode.  Also, some packet types are never
+sent up by the card, so you will never see them (ack, rts, cts, probe
+etc.)  There is a simple program (showcap) included in the ray_cs
+package which parses the 802.11 headers.
+
+Known Problems and missing features
+
+	Does not work with non x86
+
+	Does not work with SMP
+
+	Support for defragmenting frames is not yet debugged, and in
+	fact is known to not work.  I have never encountered a net set
+	up to fragment, but still, it should be fixed.
+
+	The ioctl support is incomplete.  The hardware address cannot be set
+	using ifconfig yet.  If a different hardware address is needed, it may
+	be set using the phy_addr parameter in ray_cs.opts.  This requires
+	a card insertion to take effect.