Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 433 insertions, 0 deletions

diff --git a/Documentation/powerpc/cxlflash.rst b/Documentation/powerpc/cxlflash.rst
new file mode 100644
index 000000000..cea67931b
--- /dev/null
+++ b/Documentation/powerpc/cxlflash.rst
@@ -0,0 +1,433 @@
+================================
+Coherent Accelerator (CXL) Flash
+================================
+
+Introduction
+============
+
+    The IBM Power architecture provides support for CAPI (Coherent
+    Accelerator Power Interface), which is available to certain PCIe slots
+    on Power 8 systems. CAPI can be thought of as a special tunneling
+    protocol through PCIe that allow PCIe adapters to look like special
+    purpose co-processors which can read or write an application's
+    memory and generate page faults. As a result, the host interface to
+    an adapter running in CAPI mode does not require the data buffers to
+    be mapped to the device's memory (IOMMU bypass) nor does it require
+    memory to be pinned.
+
+    On Linux, Coherent Accelerator (CXL) kernel services present CAPI
+    devices as a PCI device by implementing a virtual PCI host bridge.
+    This abstraction simplifies the infrastructure and programming
+    model, allowing for drivers to look similar to other native PCI
+    device drivers.
+
+    CXL provides a mechanism by which user space applications can
+    directly talk to a device (network or storage) bypassing the typical
+    kernel/device driver stack. The CXL Flash Adapter Driver enables a
+    user space application direct access to Flash storage.
+
+    The CXL Flash Adapter Driver is a kernel module that sits in the
+    SCSI stack as a low level device driver (below the SCSI disk and
+    protocol drivers) for the IBM CXL Flash Adapter. This driver is
+    responsible for the initialization of the adapter, setting up the
+    special path for user space access, and performing error recovery. It
+    communicates directly the Flash Accelerator Functional Unit (AFU)
+    as described in Documentation/powerpc/cxl.rst.
+
+    The cxlflash driver supports two, mutually exclusive, modes of
+    operation at the device (LUN) level:
+
+        - Any flash device (LUN) can be configured to be accessed as a
+          regular disk device (i.e.: /dev/sdc). This is the default mode.
+
+        - Any flash device (LUN) can be configured to be accessed from
+          user space with a special block library. This mode further
+          specifies the means of accessing the device and provides for
+          either raw access to the entire LUN (referred to as direct
+          or physical LUN access) or access to a kernel/AFU-mediated
+          partition of the LUN (referred to as virtual LUN access). The
+          segmentation of a disk device into virtual LUNs is assisted
+          by special translation services provided by the Flash AFU.
+
+Overview
+========
+
+    The Coherent Accelerator Interface Architecture (CAIA) introduces a
+    concept of a master context. A master typically has special privileges
+    granted to it by the kernel or hypervisor allowing it to perform AFU
+    wide management and control. The master may or may not be involved
+    directly in each user I/O, but at the minimum is involved in the
+    initial setup before the user application is allowed to send requests
+    directly to the AFU.
+
+    The CXL Flash Adapter Driver establishes a master context with the
+    AFU. It uses memory mapped I/O (MMIO) for this control and setup. The
+    Adapter Problem Space Memory Map looks like this::
+
+                     +-------------------------------+
+                     |    512 * 64 KB User MMIO      |
+                     |        (per context)          |
+                     |       User Accessible         |
+                     +-------------------------------+
+                     |    512 * 128 B per context    |
+                     |    Provisioning and Control   |
+                     |   Trusted Process accessible  |
+                     +-------------------------------+
+                     |         64 KB Global          |
+                     |   Trusted Process accessible  |
+                     +-------------------------------+
+
+    This driver configures itself into the SCSI software stack as an
+    adapter driver. The driver is the only entity that is considered a
+    Trusted Process to program the Provisioning and Control and Global
+    areas in the MMIO Space shown above.  The master context driver
+    discovers all LUNs attached to the CXL Flash adapter and instantiates
+    scsi block devices (/dev/sdb, /dev/sdc etc.) for each unique LUN
+    seen from each path.
+
+    Once these scsi block devices are instantiated, an application
+    written to a specification provided by the block library may get
+    access to the Flash from user space (without requiring a system call).
+
+    This master context driver also provides a series of ioctls for this
+    block library to enable this user space access.  The driver supports
+    two modes for accessing the block device.
+
+    The first mode is called a virtual mode. In this mode a single scsi
+    block device (/dev/sdb) may be carved up into any number of distinct
+    virtual LUNs. The virtual LUNs may be resized as long as the sum of
+    the sizes of all the virtual LUNs, along with the meta-data associated
+    with it does not exceed the physical capacity.
+
+    The second mode is called the physical mode. In this mode a single
+    block device (/dev/sdb) may be opened directly by the block library
+    and the entire space for the LUN is available to the application.
+
+    Only the physical mode provides persistence of the data.  i.e. The
+    data written to the block device will survive application exit and
+    restart and also reboot. The virtual LUNs do not persist (i.e. do
+    not survive after the application terminates or the system reboots).
+
+
+Block library API
+=================
+
+    Applications intending to get access to the CXL Flash from user
+    space should use the block library, as it abstracts the details of
+    interfacing directly with the cxlflash driver that are necessary for
+    performing administrative actions (i.e.: setup, tear down, resize).
+    The block library can be thought of as a 'user' of services,
+    implemented as IOCTLs, that are provided by the cxlflash driver
+    specifically for devices (LUNs) operating in user space access
+    mode. While it is not a requirement that applications understand
+    the interface between the block library and the cxlflash driver,
+    a high-level overview of each supported service (IOCTL) is provided
+    below.
+
+    The block library can be found on GitHub:
+    http://github.com/open-power/capiflash
+
+
+CXL Flash Driver LUN IOCTLs
+===========================
+
+    Users, such as the block library, that wish to interface with a flash
+    device (LUN) via user space access need to use the services provided
+    by the cxlflash driver. As these services are implemented as ioctls,
+    a file descriptor handle must first be obtained in order to establish
+    the communication channel between a user and the kernel.  This file
+    descriptor is obtained by opening the device special file associated
+    with the scsi disk device (/dev/sdb) that was created during LUN
+    discovery. As per the location of the cxlflash driver within the
+    SCSI protocol stack, this open is actually not seen by the cxlflash
+    driver. Upon successful open, the user receives a file descriptor
+    (herein referred to as fd1) that should be used for issuing the
+    subsequent ioctls listed below.
+
+    The structure definitions for these IOCTLs are available in:
+    uapi/scsi/cxlflash_ioctl.h
+
+DK_CXLFLASH_ATTACH
+------------------
+
+    This ioctl obtains, initializes, and starts a context using the CXL
+    kernel services. These services specify a context id (u16) by which
+    to uniquely identify the context and its allocated resources. The
+    services additionally provide a second file descriptor (herein
+    referred to as fd2) that is used by the block library to initiate
+    memory mapped I/O (via mmap()) to the CXL flash device and poll for
+    completion events. This file descriptor is intentionally installed by
+    this driver and not the CXL kernel services to allow for intermediary
+    notification and access in the event of a non-user-initiated close(),
+    such as a killed process. This design point is described in further
+    detail in the description for the DK_CXLFLASH_DETACH ioctl.
+
+    There are a few important aspects regarding the "tokens" (context id
+    and fd2) that are provided back to the user:
+
+        - These tokens are only valid for the process under which they
+          were created. The child of a forked process cannot continue
+          to use the context id or file descriptor created by its parent
+          (see DK_CXLFLASH_VLUN_CLONE for further details).
+
+        - These tokens are only valid for the lifetime of the context and
+          the process under which they were created. Once either is
+          destroyed, the tokens are to be considered stale and subsequent
+          usage will result in errors.
+
+	- A valid adapter file descriptor (fd2 >= 0) is only returned on
+	  the initial attach for a context. Subsequent attaches to an
+	  existing context (DK_CXLFLASH_ATTACH_REUSE_CONTEXT flag present)
+	  do not provide the adapter file descriptor as it was previously
+	  made known to the application.
+
+        - When a context is no longer needed, the user shall detach from
+          the context via the DK_CXLFLASH_DETACH ioctl. When this ioctl
+	  returns with a valid adapter file descriptor and the return flag
+	  DK_CXLFLASH_APP_CLOSE_ADAP_FD is present, the application _must_
+	  close the adapter file descriptor following a successful detach.
+
+	- When this ioctl returns with a valid fd2 and the return flag
+	  DK_CXLFLASH_APP_CLOSE_ADAP_FD is present, the application _must_
+	  close fd2 in the following circumstances:
+
+		+ Following a successful detach of the last user of the context
+		+ Following a successful recovery on the context's original fd2
+		+ In the child process of a fork(), following a clone ioctl,
+		  on the fd2 associated with the source context
+
+        - At any time, a close on fd2 will invalidate the tokens. Applications
+	  should exercise caution to only close fd2 when appropriate (outlined
+	  in the previous bullet) to avoid premature loss of I/O.
+
+DK_CXLFLASH_USER_DIRECT
+-----------------------
+    This ioctl is responsible for transitioning the LUN to direct
+    (physical) mode access and configuring the AFU for direct access from
+    user space on a per-context basis. Additionally, the block size and
+    last logical block address (LBA) are returned to the user.
+
+    As mentioned previously, when operating in user space access mode,
+    LUNs may be accessed in whole or in part. Only one mode is allowed
+    at a time and if one mode is active (outstanding references exist),
+    requests to use the LUN in a different mode are denied.
+
+    The AFU is configured for direct access from user space by adding an
+    entry to the AFU's resource handle table. The index of the entry is
+    treated as a resource handle that is returned to the user. The user
+    is then able to use the handle to reference the LUN during I/O.
+
+DK_CXLFLASH_USER_VIRTUAL
+------------------------
+    This ioctl is responsible for transitioning the LUN to virtual mode
+    of access and configuring the AFU for virtual access from user space
+    on a per-context basis. Additionally, the block size and last logical
+    block address (LBA) are returned to the user.
+
+    As mentioned previously, when operating in user space access mode,
+    LUNs may be accessed in whole or in part. Only one mode is allowed
+    at a time and if one mode is active (outstanding references exist),
+    requests to use the LUN in a different mode are denied.
+
+    The AFU is configured for virtual access from user space by adding
+    an entry to the AFU's resource handle table. The index of the entry
+    is treated as a resource handle that is returned to the user. The
+    user is then able to use the handle to reference the LUN during I/O.
+
+    By default, the virtual LUN is created with a size of 0. The user
+    would need to use the DK_CXLFLASH_VLUN_RESIZE ioctl to adjust the grow
+    the virtual LUN to a desired size. To avoid having to perform this
+    resize for the initial creation of the virtual LUN, the user has the
+    option of specifying a size as part of the DK_CXLFLASH_USER_VIRTUAL
+    ioctl, such that when success is returned to the user, the
+    resource handle that is provided is already referencing provisioned
+    storage. This is reflected by the last LBA being a non-zero value.
+
+    When a LUN is accessible from more than one port, this ioctl will
+    return with the DK_CXLFLASH_ALL_PORTS_ACTIVE return flag set. This
+    provides the user with a hint that I/O can be retried in the event
+    of an I/O error as the LUN can be reached over multiple paths.
+
+DK_CXLFLASH_VLUN_RESIZE
+-----------------------
+    This ioctl is responsible for resizing a previously created virtual
+    LUN and will fail if invoked upon a LUN that is not in virtual
+    mode. Upon success, an updated last LBA is returned to the user
+    indicating the new size of the virtual LUN associated with the
+    resource handle.
+
+    The partitioning of virtual LUNs is jointly mediated by the cxlflash
+    driver and the AFU. An allocation table is kept for each LUN that is
+    operating in the virtual mode and used to program a LUN translation
+    table that the AFU references when provided with a resource handle.
+
+    This ioctl can return -EAGAIN if an AFU sync operation takes too long.
+    In addition to returning a failure to user, cxlflash will also schedule
+    an asynchronous AFU reset. Should the user choose to retry the operation,
+    it is expected to succeed. If this ioctl fails with -EAGAIN, the user
+    can either retry the operation or treat it as a failure.
+
+DK_CXLFLASH_RELEASE
+-------------------
+    This ioctl is responsible for releasing a previously obtained
+    reference to either a physical or virtual LUN. This can be
+    thought of as the inverse of the DK_CXLFLASH_USER_DIRECT or
+    DK_CXLFLASH_USER_VIRTUAL ioctls. Upon success, the resource handle
+    is no longer valid and the entry in the resource handle table is
+    made available to be used again.
+
+    As part of the release process for virtual LUNs, the virtual LUN
+    is first resized to 0 to clear out and free the translation tables
+    associated with the virtual LUN reference.
+
+DK_CXLFLASH_DETACH
+------------------
+    This ioctl is responsible for unregistering a context with the
+    cxlflash driver and release outstanding resources that were
+    not explicitly released via the DK_CXLFLASH_RELEASE ioctl. Upon
+    success, all "tokens" which had been provided to the user from the
+    DK_CXLFLASH_ATTACH onward are no longer valid.
+
+    When the DK_CXLFLASH_APP_CLOSE_ADAP_FD flag was returned on a successful
+    attach, the application _must_ close the fd2 associated with the context
+    following the detach of the final user of the context.
+
+DK_CXLFLASH_VLUN_CLONE
+----------------------
+    This ioctl is responsible for cloning a previously created
+    context to a more recently created context. It exists solely to
+    support maintaining user space access to storage after a process
+    forks. Upon success, the child process (which invoked the ioctl)
+    will have access to the same LUNs via the same resource handle(s)
+    as the parent, but under a different context.
+
+    Context sharing across processes is not supported with CXL and
+    therefore each fork must be met with establishing a new context
+    for the child process. This ioctl simplifies the state management
+    and playback required by a user in such a scenario. When a process
+    forks, child process can clone the parents context by first creating
+    a context (via DK_CXLFLASH_ATTACH) and then using this ioctl to
+    perform the clone from the parent to the child.
+
+    The clone itself is fairly simple. The resource handle and lun
+    translation tables are copied from the parent context to the child's
+    and then synced with the AFU.
+
+    When the DK_CXLFLASH_APP_CLOSE_ADAP_FD flag was returned on a successful
+    attach, the application _must_ close the fd2 associated with the source
+    context (still resident/accessible in the parent process) following the
+    clone. This is to avoid a stale entry in the file descriptor table of the
+    child process.
+
+    This ioctl can return -EAGAIN if an AFU sync operation takes too long.
+    In addition to returning a failure to user, cxlflash will also schedule
+    an asynchronous AFU reset. Should the user choose to retry the operation,
+    it is expected to succeed. If this ioctl fails with -EAGAIN, the user
+    can either retry the operation or treat it as a failure.
+
+DK_CXLFLASH_VERIFY
+------------------
+    This ioctl is used to detect various changes such as the capacity of
+    the disk changing, the number of LUNs visible changing, etc. In cases
+    where the changes affect the application (such as a LUN resize), the
+    cxlflash driver will report the changed state to the application.
+
+    The user calls in when they want to validate that a LUN hasn't been
+    changed in response to a check condition. As the user is operating out
+    of band from the kernel, they will see these types of events without
+    the kernel's knowledge. When encountered, the user's architected
+    behavior is to call in to this ioctl, indicating what they want to
+    verify and passing along any appropriate information. For now, only
+    verifying a LUN change (ie: size different) with sense data is
+    supported.
+
+DK_CXLFLASH_RECOVER_AFU
+-----------------------
+    This ioctl is used to drive recovery (if such an action is warranted)
+    of a specified user context. Any state associated with the user context
+    is re-established upon successful recovery.
+
+    User contexts are put into an error condition when the device needs to
+    be reset or is terminating. Users are notified of this error condition
+    by seeing all 0xF's on an MMIO read. Upon encountering this, the
+    architected behavior for a user is to call into this ioctl to recover
+    their context. A user may also call into this ioctl at any time to
+    check if the device is operating normally. If a failure is returned
+    from this ioctl, the user is expected to gracefully clean up their
+    context via release/detach ioctls. Until they do, the context they
+    hold is not relinquished. The user may also optionally exit the process
+    at which time the context/resources they held will be freed as part of
+    the release fop.
+
+    When the DK_CXLFLASH_APP_CLOSE_ADAP_FD flag was returned on a successful
+    attach, the application _must_ unmap and close the fd2 associated with the
+    original context following this ioctl returning success and indicating that
+    the context was recovered (DK_CXLFLASH_RECOVER_AFU_CONTEXT_RESET).
+
+DK_CXLFLASH_MANAGE_LUN
+----------------------
+    This ioctl is used to switch a LUN from a mode where it is available
+    for file-system access (legacy), to a mode where it is set aside for
+    exclusive user space access (superpipe). In case a LUN is visible
+    across multiple ports and adapters, this ioctl is used to uniquely
+    identify each LUN by its World Wide Node Name (WWNN).
+
+
+CXL Flash Driver Host IOCTLs
+============================
+
+    Each host adapter instance that is supported by the cxlflash driver
+    has a special character device associated with it to enable a set of
+    host management function. These character devices are hosted in a
+    class dedicated for cxlflash and can be accessed via `/dev/cxlflash/*`.
+
+    Applications can be written to perform various functions using the
+    host ioctl APIs below.
+
+    The structure definitions for these IOCTLs are available in:
+    uapi/scsi/cxlflash_ioctl.h
+
+HT_CXLFLASH_LUN_PROVISION
+-------------------------
+    This ioctl is used to create and delete persistent LUNs on cxlflash
+    devices that lack an external LUN management interface. It is only
+    valid when used with AFUs that support the LUN provision capability.
+
+    When sufficient space is available, LUNs can be created by specifying
+    the target port to host the LUN and a desired size in 4K blocks. Upon
+    success, the LUN ID and WWID of the created LUN will be returned and
+    the SCSI bus can be scanned to detect the change in LUN topology. Note
+    that partial allocations are not supported. Should a creation fail due
+    to a space issue, the target port can be queried for its current LUN
+    geometry.
+
+    To remove a LUN, the device must first be disassociated from the Linux
+    SCSI subsystem. The LUN deletion can then be initiated by specifying a
+    target port and LUN ID. Upon success, the LUN geometry associated with
+    the port will be updated to reflect new number of provisioned LUNs and
+    available capacity.
+
+    To query the LUN geometry of a port, the target port is specified and
+    upon success, the following information is presented:
+
+        - Maximum number of provisioned LUNs allowed for the port
+        - Current number of provisioned LUNs for the port
+        - Maximum total capacity of provisioned LUNs for the port (4K blocks)
+        - Current total capacity of provisioned LUNs for the port (4K blocks)
+
+    With this information, the number of available LUNs and capacity can be
+    can be calculated.
+
+HT_CXLFLASH_AFU_DEBUG
+---------------------
+    This ioctl is used to debug AFUs by supporting a command pass-through
+    interface. It is only valid when used with AFUs that support the AFU
+    debug capability.
+
+    With exception of buffer management, AFU debug commands are opaque to
+    cxlflash and treated as pass-through. For debug commands that do require
+    data transfer, the user supplies an adequately sized data buffer and must
+    specify the data transfer direction with respect to the host. There is a
+    maximum transfer size of 256K imposed. Note that partial read completions
+    are not supported - when errors are experienced with a host read data
+    transfer, the data buffer is not copied back to the user.