Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 360 insertions, 0 deletions

diff --git a/Documentation/process/maintainer-netdev.rst b/Documentation/process/maintainer-netdev.rst
new file mode 100644
index 000000000..4a75686d3
--- /dev/null
+++ b/Documentation/process/maintainer-netdev.rst
@@ -0,0 +1,360 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _netdev-FAQ:
+
+=============================
+Networking subsystem (netdev)
+=============================
+
+tl;dr
+-----
+
+ - designate your patch to a tree - ``[PATCH net]`` or ``[PATCH net-next]``
+ - for fixes the ``Fixes:`` tag is required, regardless of the tree
+ - don't post large series (> 15 patches), break them up
+ - don't repost your patches within one 24h period
+ - reverse xmas tree
+
+netdev
+------
+
+netdev is a mailing list for all network-related Linux stuff.  This
+includes anything found under net/ (i.e. core code like IPv6) and
+drivers/net (i.e. hardware specific drivers) in the Linux source tree.
+
+Note that some subsystems (e.g. wireless drivers) which have a high
+volume of traffic have their own specific mailing lists and trees.
+
+The netdev list is managed (like many other Linux mailing lists) through
+VGER (http://vger.kernel.org/) with archives available at
+https://lore.kernel.org/netdev/
+
+Aside from subsystems like those mentioned above, all network-related
+Linux development (i.e. RFC, review, comments, etc.) takes place on
+netdev.
+
+Development cycle
+-----------------
+
+Here is a bit of background information on
+the cadence of Linux development.  Each new release starts off with a
+two week "merge window" where the main maintainers feed their new stuff
+to Linus for merging into the mainline tree.  After the two weeks, the
+merge window is closed, and it is called/tagged ``-rc1``.  No new
+features get mainlined after this -- only fixes to the rc1 content are
+expected.  After roughly a week of collecting fixes to the rc1 content,
+rc2 is released.  This repeats on a roughly weekly basis until rc7
+(typically; sometimes rc6 if things are quiet, or rc8 if things are in a
+state of churn), and a week after the last vX.Y-rcN was done, the
+official vX.Y is released.
+
+To find out where we are now in the cycle - load the mainline (Linus)
+page here:
+
+  https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+
+and note the top of the "tags" section.  If it is rc1, it is early in
+the dev cycle.  If it was tagged rc7 a week ago, then a release is
+probably imminent. If the most recent tag is a final release tag
+(without an ``-rcN`` suffix) - we are most likely in a merge window
+and ``net-next`` is closed.
+
+git trees and patch flow
+------------------------
+
+There are two networking trees (git repositories) in play.  Both are
+driven by David Miller, the main network maintainer.  There is the
+``net`` tree, and the ``net-next`` tree.  As you can probably guess from
+the names, the ``net`` tree is for fixes to existing code already in the
+mainline tree from Linus, and ``net-next`` is where the new code goes
+for the future release.  You can find the trees here:
+
+- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
+- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
+
+Relating that to kernel development: At the beginning of the 2-week
+merge window, the ``net-next`` tree will be closed - no new changes/features.
+The accumulated new content of the past ~10 weeks will be passed onto
+mainline/Linus via a pull request for vX.Y -- at the same time, the
+``net`` tree will start accumulating fixes for this pulled content
+relating to vX.Y
+
+An announcement indicating when ``net-next`` has been closed is usually
+sent to netdev, but knowing the above, you can predict that in advance.
+
+.. warning::
+  Do not send new ``net-next`` content to netdev during the
+  period during which ``net-next`` tree is closed.
+
+RFC patches sent for review only are obviously welcome at any time
+(use ``--subject-prefix='RFC net-next'`` with ``git format-patch``).
+
+Shortly after the two weeks have passed (and vX.Y-rc1 is released), the
+tree for ``net-next`` reopens to collect content for the next (vX.Y+1)
+release.
+
+If you aren't subscribed to netdev and/or are simply unsure if
+``net-next`` has re-opened yet, simply check the ``net-next`` git
+repository link above for any new networking-related commits.  You may
+also check the following website for the current status:
+
+  http://vger.kernel.org/~davem/net-next.html
+
+The ``net`` tree continues to collect fixes for the vX.Y content, and is
+fed back to Linus at regular (~weekly) intervals.  Meaning that the
+focus for ``net`` is on stabilization and bug fixes.
+
+Finally, the vX.Y gets released, and the whole cycle starts over.
+
+netdev patch review
+-------------------
+
+Patch status
+~~~~~~~~~~~~
+
+Status of a patch can be checked by looking at the main patchwork
+queue for netdev:
+
+  https://patchwork.kernel.org/project/netdevbpf/list/
+
+The "State" field will tell you exactly where things are at with your
+patch. Patches are indexed by the ``Message-ID`` header of the emails
+which carried them so if you have trouble finding your patch append
+the value of ``Message-ID`` to the URL above.
+
+Updating patch status
+~~~~~~~~~~~~~~~~~~~~~
+
+It may be tempting to help the maintainers and update the state of your
+own patches when you post a new version or spot a bug. Please **do not**
+do that.
+Interfering with the patch status on patchwork will only cause confusion. Leave
+it to the maintainer to figure out what is the most recent and current
+version that should be applied. If there is any doubt, the maintainer
+will reply and ask what should be done.
+
+Review timelines
+~~~~~~~~~~~~~~~~
+
+Generally speaking, the patches get triaged quickly (in less than
+48h). But be patient, if your patch is active in patchwork (i.e. it's
+listed on the project's patch list) the chances it was missed are close to zero.
+Asking the maintainer for status updates on your
+patch is a good way to ensure your patch is ignored or pushed to the
+bottom of the priority list.
+
+Partial resends
+~~~~~~~~~~~~~~~
+
+Please always resend the entire patch series and make sure you do number your
+patches such that it is clear this is the latest and greatest set of patches
+that can be applied. Do not try to resend just the patches which changed.
+
+Handling misapplied patches
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Occasionally a patch series gets applied before receiving critical feedback,
+or the wrong version of a series gets applied.
+There is no revert possible, once it is pushed out, it stays like that.
+Please send incremental versions on top of what has been merged in order to fix
+the patches the way they would look like if your latest patch series was to be
+merged.
+
+Stable tree
+~~~~~~~~~~~
+
+While it used to be the case that netdev submissions were not supposed
+to carry explicit ``CC: stable@vger.kernel.org`` tags that is no longer
+the case today. Please follow the standard stable rules in
+:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`,
+and make sure you include appropriate Fixes tags!
+
+Security fixes
+~~~~~~~~~~~~~~
+
+Do not email netdev maintainers directly if you think you discovered
+a bug that might have possible security implications.
+The current netdev maintainer has consistently requested that
+people use the mailing lists and not reach out directly.  If you aren't
+OK with that, then perhaps consider mailing security@kernel.org or
+reading about http://oss-security.openwall.org/wiki/mailing-lists/distros
+as possible alternative mechanisms.
+
+
+Co-posting changes to user space components
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+User space code exercising kernel features should be posted
+alongside kernel patches. This gives reviewers a chance to see
+how any new interface is used and how well it works.
+
+When user space tools reside in the kernel repo itself all changes
+should generally come as one series. If series becomes too large
+or the user space project is not reviewed on netdev include a link
+to a public repo where user space patches can be seen.
+
+In case user space tooling lives in a separate repository but is
+reviewed on netdev  (e.g. patches to ``iproute2`` tools) kernel and
+user space patches should form separate series (threads) when posted
+to the mailing list, e.g.::
+
+  [PATCH net-next 0/3] net: some feature cover letter
+   └─ [PATCH net-next 1/3] net: some feature prep
+   └─ [PATCH net-next 2/3] net: some feature do it
+   └─ [PATCH net-next 3/3] selftest: net: some feature
+
+  [PATCH iproute2-next] ip: add support for some feature
+
+Posting as one thread is discouraged because it confuses patchwork
+(as of patchwork 2.2.2).
+
+Preparing changes
+-----------------
+
+Attention to detail is important.  Re-read your own work as if you were the
+reviewer.  You can start with using ``checkpatch.pl``, perhaps even with
+the ``--strict`` flag.  But do not be mindlessly robotic in doing so.
+If your change is a bug fix, make sure your commit log indicates the
+end-user visible symptom, the underlying reason as to why it happens,
+and then if necessary, explain why the fix proposed is the best way to
+get things done.  Don't mangle whitespace, and as is common, don't
+mis-indent function arguments that span multiple lines.  If it is your
+first patch, mail it to yourself so you can test apply it to an
+unpatched tree to confirm infrastructure didn't mangle it.
+
+Finally, go back and read
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+to be sure you are not repeating some common mistake documented there.
+
+Indicating target tree
+~~~~~~~~~~~~~~~~~~~~~~
+
+To help maintainers and CI bots you should explicitly mark which tree
+your patch is targeting. Assuming that you use git, use the prefix
+flag::
+
+  git format-patch --subject-prefix='PATCH net-next' start..finish
+
+Use ``net`` instead of ``net-next`` (always lower case) in the above for
+bug-fix ``net`` content.
+
+Dividing work into patches
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Put yourself in the shoes of the reviewer. Each patch is read separately
+and therefore should constitute a comprehensible step towards your stated
+goal.
+
+Avoid sending series longer than 15 patches. Larger series takes longer
+to review as reviewers will defer looking at it until they find a large
+chunk of time. A small series can be reviewed in a short time, so Maintainers
+just do it. As a result, a sequence of smaller series gets merged quicker and
+with better review coverage. Re-posting large series also increases the mailing
+list traffic.
+
+Multi-line comments
+~~~~~~~~~~~~~~~~~~~
+
+Comment style convention is slightly different for networking and most of
+the tree.  Instead of this::
+
+  /*
+   * foobar blah blah blah
+   * another line of text
+   */
+
+it is requested that you make it look like this::
+
+  /* foobar blah blah blah
+   * another line of text
+   */
+
+Local variable ordering ("reverse xmas tree", "RCS")
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Netdev has a convention for ordering local variables in functions.
+Order the variable declaration lines longest to shortest, e.g.::
+
+  struct scatterlist *sg;
+  struct sk_buff *skb;
+  int err, i;
+
+If there are dependencies between the variables preventing the ordering
+move the initialization out of line.
+
+Format precedence
+~~~~~~~~~~~~~~~~~
+
+When working in existing code which uses nonstandard formatting make
+your code follow the most recent guidelines, so that eventually all code
+in the domain of netdev is in the preferred format.
+
+Resending after review
+~~~~~~~~~~~~~~~~~~~~~~
+
+Allow at least 24 hours to pass between postings. This will ensure reviewers
+from all geographical locations have a chance to chime in. Do not wait
+too long (weeks) between postings either as it will make it harder for reviewers
+to recall all the context.
+
+Make sure you address all the feedback in your new posting. Do not post a new
+version of the code if the discussion about the previous version is still
+ongoing, unless directly instructed by a reviewer.
+
+Testing
+-------
+
+Expected level of testing
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+At the very minimum your changes must survive an ``allyesconfig`` and an
+``allmodconfig`` build with ``W=1`` set without new warnings or failures.
+
+Ideally you will have done run-time testing specific to your change,
+and the patch series contains a set of kernel selftest for
+``tools/testing/selftests/net`` or using the KUnit framework.
+
+You are expected to test your changes on top of the relevant networking
+tree (``net`` or ``net-next``) and not e.g. a stable tree or ``linux-next``.
+
+patchwork checks
+~~~~~~~~~~~~~~~~
+
+Checks in patchwork are mostly simple wrappers around existing kernel
+scripts, the sources are available at:
+
+https://github.com/kuba-moo/nipa/tree/master/tests
+
+**Do not** post your patches just to run them through the checks.
+You must ensure that your patches are ready by testing them locally
+before posting to the mailing list. The patchwork build bot instance
+gets overloaded very easily and netdev@vger really doesn't need more
+traffic if we can help it.
+
+netdevsim
+~~~~~~~~~
+
+``netdevsim`` is a test driver which can be used to exercise driver
+configuration APIs without requiring capable hardware.
+Mock-ups and tests based on ``netdevsim`` are strongly encouraged when
+adding new APIs, but ``netdevsim`` in itself is **not** considered
+a use case/user. You must also implement the new APIs in a real driver.
+
+We give no guarantees that ``netdevsim`` won't change in the future
+in a way which would break what would normally be considered uAPI.
+
+``netdevsim`` is reserved for use by upstream tests only, so any
+new ``netdevsim`` features must be accompanied by selftests under
+``tools/testing/selftests/``.
+
+Testimonials / feedback
+-----------------------
+
+Some companies use peer feedback in employee performance reviews.
+Please feel free to request feedback from netdev maintainers,
+especially if you spend significant amount of time reviewing code
+and go out of your way to improve shared infrastructure.
+
+The feedback must be requested by you, the contributor, and will always
+be shared with you (even if you request for it to be submitted to your
+manager).