Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 143 insertions, 0 deletions

diff --git a/Documentation/process/researcher-guidelines.rst b/Documentation/process/researcher-guidelines.rst
new file mode 100644
index 000000000..afc944e0e
--- /dev/null
+++ b/Documentation/process/researcher-guidelines.rst
@@ -0,0 +1,143 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _researcher_guidelines:
+
+Researcher Guidelines
++++++++++++++++++++++
+
+The Linux kernel community welcomes transparent research on the Linux
+kernel, the activities involved in producing it, and any other byproducts
+of its development. Linux benefits greatly from this kind of research, and
+most aspects of Linux are driven by research in one form or another.
+
+The community greatly appreciates if researchers can share preliminary
+findings before making their results public, especially if such research
+involves security. Getting involved early helps both improve the quality
+of research and ability for Linux to improve from it. In any case,
+sharing open access copies of the published research with the community
+is recommended.
+
+This document seeks to clarify what the Linux kernel community considers
+acceptable and non-acceptable practices when conducting such research. At
+the very least, such research and related activities should follow
+standard research ethics rules. For more background on research ethics
+generally, ethics in technology, and research of developer communities
+in particular, see:
+
+* `History of Research Ethics <https://www.unlv.edu/research/ORI-HSR/history-ethics>`_
+* `IEEE Ethics <https://www.ieee.org/about/ethics/index.html>`_
+* `Developer and Researcher Views on the Ethics of Experiments on Open-Source Projects <https://arxiv.org/pdf/2112.13217.pdf>`_
+
+The Linux kernel community expects that everyone interacting with the
+project is participating in good faith to make Linux better. Research on
+any publicly-available artifact (including, but not limited to source
+code) produced by the Linux kernel community is welcome, though research
+on developers must be distinctly opt-in.
+
+Passive research that is based entirely on publicly available sources,
+including posts to public mailing lists and commits to public
+repositories, is clearly permissible. Though, as with any research,
+standard ethics must still be followed.
+
+Active research on developer behavior, however, must be done with the
+explicit agreement of, and full disclosure to, the individual developers
+involved. Developers cannot be interacted with/experimented on without
+consent; this, too, is standard research ethics.
+
+To help clarify: sending patches to developers *is* interacting
+with them, but they have already consented to receiving *good faith
+contributions*. Sending intentionally flawed/vulnerable patches or
+contributing misleading information to discussions is not consented
+to. Such communication can be damaging to the developer (e.g. draining
+time, effort, and morale) and damaging to the project by eroding
+the entire developer community's trust in the contributor (and the
+contributor's organization as a whole), undermining efforts to provide
+constructive feedback to contributors, and putting end users at risk of
+software flaws.
+
+Participation in the development of Linux itself by researchers, as
+with anyone, is welcomed and encouraged. Research into Linux code is
+a common practice, especially when it comes to developing or running
+analysis tools that produce actionable results.
+
+When engaging with the developer community, sending a patch has
+traditionally been the best way to make an impact. Linux already has
+plenty of known bugs -- what's much more helpful is having vetted fixes.
+Before contributing, carefully read the appropriate documentation:
+
+* Documentation/process/development-process.rst
+* Documentation/process/submitting-patches.rst
+* Documentation/admin-guide/reporting-issues.rst
+* Documentation/admin-guide/security-bugs.rst
+
+Then send a patch (including a commit log with all the details listed
+below) and follow up on any feedback from other developers.
+
+When sending patches produced from research, the commit logs should
+contain at least the following details, so that developers have
+appropriate context for understanding the contribution. Answer:
+
+* What is the specific problem that has been found?
+* How could the problem be reached on a running system?
+* What effect would encountering the problem have on the system?
+* How was the problem found? Specifically include details about any
+  testing, static or dynamic analysis programs, and any other tools or
+  methods used to perform the work.
+* Which version of Linux was the problem found on? Using the most recent
+  release or a recent linux-next branch is strongly preferred (see
+  Documentation/process/howto.rst).
+* What was changed to fix the problem, and why it is believed to be correct?
+* How was the change build tested and run-time tested?
+* What prior commit does this change fix? This should go in a "Fixes:"
+  tag as the documentation describes.
+* Who else has reviewed this patch? This should go in appropriate
+  "Reviewed-by:" tags; see below.
+
+For example::
+
+  From: Author <author@email>
+  Subject: [PATCH] drivers/foo_bar: Add missing kfree()
+
+  The error path in foo_bar driver does not correctly free the allocated
+  struct foo_bar_info. This can happen if the attached foo_bar device
+  rejects the initialization packets sent during foo_bar_probe(). This
+  would result in a 64 byte slab memory leak once per device attach,
+  wasting memory resources over time.
+
+  This flaw was found using an experimental static analysis tool we are
+  developing, LeakMagic[1], which reported the following warning when
+  analyzing the v5.15 kernel release:
+
+   path/to/foo_bar.c:187: missing kfree() call?
+
+  Add the missing kfree() to the error path. No other references to
+  this memory exist outside the probe function, so this is the only
+  place it can be freed.
+
+  x86_64 and arm64 defconfig builds with CONFIG_FOO_BAR=y using GCC
+  11.2 show no new warnings, and LeakMagic no longer warns about this
+  code path. As we don't have a FooBar device to test with, no runtime
+  testing was able to be performed.
+
+  [1] https://url/to/leakmagic/details
+
+  Reported-by: Researcher <researcher@email>
+  Fixes: aaaabbbbccccdddd ("Introduce support for FooBar")
+  Signed-off-by: Author <author@email>
+  Reviewed-by: Reviewer <reviewer@email>
+
+If you are a first time contributor it is recommended that the patch
+itself be vetted by others privately before being posted to public lists.
+(This is required if you have been explicitly told your patches need
+more careful internal review.) These people are expected to have their
+"Reviewed-by" tag included in the resulting patch. Finding another
+developer familiar with Linux contribution, especially within your own
+organization, and having them help with reviews before sending them to
+the public mailing lists tends to significantly improve the quality of the
+resulting patches, and there by reduces the burden on other developers.
+
+If no one can be found to internally review patches and you need
+help finding such a person, or if you have any other questions
+related to this document and the developer community's expectations,
+please reach out to the private Technical Advisory Board mailing list:
+<tech-board@lists.linux-foundation.org>.