Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 122 insertions, 0 deletions

diff --git a/Documentation/scsi/ChangeLog.ips b/Documentation/scsi/ChangeLog.ips
new file mode 100644
index 000000000..5019f5182
--- /dev/null
+++ b/Documentation/scsi/ChangeLog.ips
@@ -0,0 +1,122 @@
+IBM ServeRAID driver Change Log
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+        5.00.01  - Sarasota ( 5i ) adapters must always be scanned first  
+                 - Get rid on IOCTL_NEW_COMMAND code  
+                 - Add Extended DCDB Commands for Tape Support in 5I                  
+        
+        4.90.11  - Don't actually RESET unless it's physically required
+                 - Remove unused compile options
+        
+        4.90.08  - Data Corruption if First Scatter Gather Element is > 64K
+        
+        4.90.08  - Increase Delays in Flashing ( Trombone Only - 4H )        
+        
+        4.90.05  - Use New PCI Architecture to facilitate Hot Plug Development
+        
+        4.90.01  - Add ServeRAID Version Checking
+
+        4.80.26  - Clean up potential code problems ( Arjan's recommendations )
+        
+        4.80.21  - Change memcpy() to copy_to_user() in NVRAM Page 5 IOCTL path   
+        
+        4.80.20  - Set max_sectors in Scsi_Host structure ( if >= 2.4.7 kernel )
+                 - 5 second delay needed after resetting an i960 adapter
+        
+        4.80.14  - Take all semaphores off stack                    
+                 - Clean Up New_IOCTL path
+                   
+        4.80.04  - Eliminate calls to strtok() if 2.4.x or greater 
+                 - Adjustments to Device Queue Depth               
+
+        4.80.00  - Make ia64 Safe    
+        
+        4.72.01  - I/O Mapped Memory release ( so "insmod ips" does not Fail )    
+                 - Don't Issue Internal FFDC Command if there are Active Commands 
+                 - Close Window for getting too many IOCTL's active 
+                   
+        4.72.00  - Allow for a Scatter-Gather Element to exceed MAX_XFER Size     
+        
+        4.71.00  - Change all memory allocations to not use GFP_DMA flag 
+                 - Code Clean-Up for 2.4.x kernel      
+        
+        4.70.15  - Fix Breakup for very large ( non-SG ) requests
+        
+        4.70.13  - Don't release HA Lock in ips_next() until SC taken off queue  
+                 - Unregister SCSI device in ips_release()                        
+                 - Don't Send CDB's if we already know the device is not present  
+                 
+        4.70.12  - Corrective actions for bad controller ( during initialization )
+        
+        4.70.09  - Use a Common ( Large Buffer ) for Flashing from the JCRM CD    
+                 - Add IPSSEND Flash Support                                      
+                 - Set Sense Data for Unknown SCSI Command                        
+                 - Use Slot Number from NVRAM Page 5 
+                 - Restore caller's DCDB Structure
+                                       
+        4.20.14  - Update patch files for kernel 2.4.0-test5
+
+        4.20.13  - Fix some failure cases / reset code
+                 - Hook into the reboot_notifier to flush the controller
+                   cache
+
+        4.20.03 - Rename version to coincide with new release schedules
+                - Performance fixes
+                - Fix truncation of /proc files with cat
+                - Merge in changes through kernel 2.4.0test1ac21
+
+        4.10.13 - Fix for dynamic unload and proc file system
+
+        4.10.00 - Add support for ServeRAID 4M/4L
+
+        4.00.06 - Fix timeout with initial FFDC command
+
+        4.00.05 - Remove wish_block from init routine
+                - Use linux/spinlock.h instead of asm/spinlock.h for kernels
+                  2.3.18 and later
+                - Sync with other changes from the 2.3 kernels
+
+        4.00.04 - Rename structures/constants to be prefixed with IPS_
+
+        4.00.03 - Add alternative passthru interface
+                - Add ability to flash ServeRAID BIOS
+
+        4.00.02 - Fix problem with PT DCDB with no buffer
+
+        4.00.01 - Add support for First Failure Data Capture
+
+        4.00.00 - Add support for ServeRAID 4
+
+        3.60.02 - Make DCDB direction based on lookup table.
+                - Only allow one DCDB command to a SCSI ID at a time.
+
+        3.60.01 - Remove bogus error check in passthru routine.
+
+        3.60.00 - Bump max commands to 128 for use with ServeRAID
+                  firmware 3.60.
+                - Change version to 3.60 to coincide with ServeRAID release
+                  numbering.
+
+        1.00.00 - Initial Public Release
+                - Functionally equivalent to 0.99.05
+
+        0.99.05 - Fix an oops on certain passthru commands
+
+        0.99.04 - Fix race condition in the passthru mechanism
+                  -- this required the interface to the utilities to change
+                - Fix error recovery code
+
+        0.99.03 - Make interrupt routine handle all completed request on the
+                  adapter not just the first one
+                - Make sure passthru commands get woken up if we run out of
+                  SCBs
+                - Send all of the commands on the queue at once rather than
+                  one at a time since the card will support it.
+
+        0.99.02 - Added some additional debug statements to print out
+                  errors if an error occurs while trying to read/write
+                  to a logical drive (IPS_DEBUG).
+
+                - Fixed read/write errors when the adapter is using an
+                  8K stripe size.
+