Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 176 insertions, 0 deletions

diff --git a/Documentation/scsi/FlashPoint.rst b/Documentation/scsi/FlashPoint.rst
new file mode 100644
index 000000000..ef3c07e94
--- /dev/null
+++ b/Documentation/scsi/FlashPoint.rst
@@ -0,0 +1,176 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+The BusLogic FlashPoint SCSI Driver
+===================================
+
+The BusLogic FlashPoint SCSI Host Adapters are now fully supported on Linux.
+The upgrade program described below has been officially terminated effective
+31 March 1997 since it is no longer needed.
+
+::
+
+  	  MYLEX INTRODUCES LINUX OPERATING SYSTEM SUPPORT FOR ITS
+  	      BUSLOGIC FLASHPOINT LINE OF SCSI HOST ADAPTERS
+
+
+  FREMONT, CA, -- October 8, 1996 -- Mylex Corporation has expanded Linux
+  operating system support to its BusLogic brand of FlashPoint Ultra SCSI
+  host adapters.  All of BusLogic's other SCSI host adapters, including the
+  MultiMaster line, currently support the Linux operating system.  Linux
+  drivers and information will be available on October 15th at
+  http://sourceforge.net/projects/dandelion/.
+
+  "Mylex is committed to supporting the Linux community," says Peter Shambora,
+  vice president of marketing for Mylex.  "We have supported Linux driver
+  development and provided technical support for our host adapters for several
+  years, and are pleased to now make our FlashPoint products available to this
+  user base."
+
+The Linux Operating System
+==========================
+
+Linux is a freely-distributed implementation of UNIX for Intel x86, Sun
+SPARC, SGI MIPS, Motorola 68k, Digital Alpha AXP and Motorola PowerPC
+machines.  It supports a wide range of software, including the X Window
+System, Emacs, and TCP/IP networking.  Further information is available at
+http://www.linux.org and http://www.ssc.com/.
+
+FlashPoint Host Adapters
+========================
+
+The FlashPoint family of Ultra SCSI host adapters, designed for workstation
+and file server environments, are available in narrow, wide, dual channel,
+and dual channel wide versions.  These adapters feature SeqEngine
+automation technology, which minimizes SCSI command overhead and reduces
+the number of interrupts generated to the CPU.
+
+About Mylex
+===========
+
+Mylex Corporation (NASDAQ/NM SYMBOL: MYLX), founded in 1983, is a leading
+producer of RAID technology and network management products.  The company
+produces high performance disk array (RAID) controllers, and complementary
+computer products for network servers, mass storage systems, workstations
+and system boards.  Through its wide range of RAID controllers and its
+BusLogic line of Ultra SCSI host adapter products, Mylex provides enabling
+intelligent I/O technologies that increase network management control,
+enhance CPU utilization, optimize I/O performance, and ensure data security
+and availability.  Products are sold globally through a network of OEMs,
+major distributors, VARs, and system integrators.  Mylex Corporation is
+headquartered at 34551 Ardenwood Blvd., Fremont, CA.
+
+Contact:
+========
+
+::
+
+  Peter Shambora
+  Vice President of Marketing
+  Mylex Corp.
+  510/796-6100
+  peters@mylex.com
+
+
+::
+
+			       ANNOUNCEMENT
+	       BusLogic FlashPoint LT/BT-948 Upgrade Program
+			      1 February 1996
+
+			  ADDITIONAL ANNOUNCEMENT
+	       BusLogic FlashPoint LW/BT-958 Upgrade Program
+			       14 June 1996
+
+  Ever since its introduction last October, the BusLogic FlashPoint LT has
+  been problematic for members of the Linux community, in that no Linux
+  drivers have been available for this new Ultra SCSI product.  Despite its
+  officially being positioned as a desktop workstation product, and not being
+  particularly well suited for a high performance multitasking operating
+  system like Linux, the FlashPoint LT has been touted by computer system
+  vendors as the latest thing, and has been sold even on many of their high
+  end systems, to the exclusion of the older MultiMaster products.  This has
+  caused grief for many people who inadvertently purchased a system expecting
+  that all BusLogic SCSI Host Adapters were supported by Linux, only to
+  discover that the FlashPoint was not supported and would not be for quite
+  some time, if ever.
+
+  After this problem was identified, BusLogic contacted its major OEM
+  customers to make sure the BT-946C/956C MultiMaster cards would still be
+  made available, and that Linux users who mistakenly ordered systems with
+  the FlashPoint would be able to upgrade to the BT-946C.  While this helped
+  many purchasers of new systems, it was only a partial solution to the
+  overall problem of FlashPoint support for Linux users.  It did nothing to
+  assist the people who initially purchased a FlashPoint for a supported
+  operating system and then later decided to run Linux, or those who had
+  ended up with a FlashPoint LT, believing it was supported, and were unable
+  to return it.
+
+  In the middle of December, I asked to meet with BusLogic's senior
+  management to discuss the issues related to Linux and free software support
+  for the FlashPoint.  Rumors of varying accuracy had been circulating
+  publicly about BusLogic's attitude toward the Linux community, and I felt
+  it was best that these issues be addressed directly.  I sent an email
+  message after 11pm one evening, and the meeting took place the next
+  afternoon.  Unfortunately, corporate wheels sometimes grind slowly,
+  especially when a company is being acquired, and so it's taken until now
+  before the details were completely determined and a public statement could
+  be made.
+
+  BusLogic is not prepared at this time to release the information necessary
+  for third parties to write drivers for the FlashPoint.  The only existing
+  FlashPoint drivers have been written directly by BusLogic Engineering, and
+  there is no FlashPoint documentation sufficiently detailed to allow outside
+  developers to write a driver without substantial assistance.  While there
+  are people at BusLogic who would rather not release the details of the
+  FlashPoint architecture at all, that debate has not yet been settled either
+  way.  In any event, even if documentation were available today it would
+  take quite a while for a usable driver to be written, especially since I'm
+  not convinced that the effort required would be worthwhile.
+
+  However, BusLogic does remain committed to providing a high performance
+  SCSI solution for the Linux community, and does not want to see anyone left
+  unable to run Linux because they have a Flashpoint LT.  Therefore, BusLogic
+  has put in place a direct upgrade program to allow any Linux user worldwide
+  to trade in their FlashPoint LT for the new BT-948 MultiMaster PCI Ultra
+  SCSI Host Adapter.  The BT-948 is the Ultra SCSI successor to the BT-946C
+  and has all the best features of both the BT-946C and FlashPoint LT,
+  including smart termination and a flash PROM for easy firmware updates, and
+  is of course compatible with the present Linux driver.  The price for this
+  upgrade has been set at US $45 plus shipping and handling, and the upgrade
+  program will be administered through BusLogic Technical Support, which can
+  be reached by electronic mail at techsup@buslogic.com, by Voice at +1 408
+  654-0760, or by FAX at +1 408 492-1542.
+
+  As of 14 June 1996, the original BusLogic FlashPoint LT to BT-948 upgrade
+  program has now been extended to encompass the FlashPoint LW Wide Ultra
+  SCSI Host Adapter.  Any Linux user worldwide may trade in their FlashPoint
+  LW (BT-950) for a BT-958 MultiMaster PCI Ultra SCSI Host Adapter.  The
+  price for this upgrade has been set at US $65 plus shipping and handling.
+
+  I was a beta test site for the BT-948/958, and versions 1.2.1 and 1.3.1 of
+  my BusLogic driver already included latent support for the BT-948/958.
+  Additional cosmetic support for the Ultra SCSI MultiMaster cards was added
+  subsequent releases.  As a result of this cooperative testing process,
+  several firmware bugs were found and corrected.  My heavily loaded Linux
+  test system provided an ideal environment for testing error recovery
+  processes that are much more rarely exercised in production systems, but
+  are crucial to overall system stability.  It was especially convenient
+  being able to work directly with their firmware engineer in demonstrating
+  the problems under control of the firmware debugging environment; things
+  sure have come a long way since the last time I worked on firmware for an
+  embedded system.  I am presently working on some performance testing and
+  expect to have some data to report in the not too distant future.
+
+  BusLogic asked me to send this announcement since a large percentage of the
+  questions regarding support for the FlashPoint have either been sent to me
+  directly via email, or have appeared in the Linux newsgroups in which I
+  participate.  To summarize, BusLogic is offering Linux users an upgrade
+  from the unsupported FlashPoint LT (BT-930) to the supported BT-948 for US
+  $45 plus shipping and handling, or from the unsupported FlashPoint LW
+  (BT-950) to the supported BT-958 for $65 plus shipping and handling.
+  Contact BusLogic Technical Support at techsup@buslogic.com or +1 408
+  654-0760 to take advantage of their offer.
+
+  		Leonard N. Zubkoff
+  		lnz@dandelion.com