Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 593 insertions, 0 deletions

diff --git a/Documentation/scsi/aic79xx.rst b/Documentation/scsi/aic79xx.rst
new file mode 100644
index 000000000..071ff5111
--- /dev/null
+++ b/Documentation/scsi/aic79xx.rst
@@ -0,0 +1,593 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===================================
+Adaptec Ultra320 Family Manager Set
+===================================
+
+README for The Linux Operating System
+
+.. The following information is available in this file:
+
+  1. Supported Hardware
+  2. Version History
+  3. Command Line Options
+  4. Additional Notes
+  5. Contacting Adaptec
+
+
+1. Supported Hardware
+=====================
+
+   The following Adaptec SCSI Host Adapters are supported by this
+   driver set.
+
+   =============              =========================================
+   Ultra320 ASIC              Description
+   =============              =========================================
+   AIC-7901A                  Single Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC
+   AIC-7901B                  Single Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC with Retained Training
+   AIC-7902A4                 Dual Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC
+   AIC-7902B                  Dual Channel 64-bit PCI-X 133MHz to
+                              Ultra320 SCSI ASIC with Retained Training
+   =============              =========================================
+
+   ========================== ===================================== ============
+   Ultra320 Adapters          Description                              ASIC
+   ========================== ===================================== ============
+   Adaptec SCSI Card 39320    Dual Channel 64-bit PCI-X 133MHz to   7902A4/7902B
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin)
+   Adaptec SCSI Card 39320A   Dual Channel 64-bit PCI-X 133MHz to      7902B
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin)
+   Adaptec SCSI Card 39320D   Dual Channel 64-bit PCI-X 133MHz to      7902A4
+                              Ultra320 SCSI Card (two external VHDC
+                              and one internal 68-pin)
+   Adaptec SCSI Card 39320D   Dual Channel 64-bit PCI-X 133MHz to      7902A4
+                              Ultra320 SCSI Card (two external VHDC
+                              and one internal 68-pin) based on the
+                              AIC-7902B ASIC
+   Adaptec SCSI Card 29320    Single Channel 64-bit PCI-X 133MHz to    7901A
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin, one
+                              internal 50-pin)
+   Adaptec SCSI Card 29320A   Single Channel 64-bit PCI-X 133MHz to    7901B
+                              Ultra320 SCSI Card (one external
+                              68-pin, two internal 68-pin, one
+                              internal 50-pin)
+   Adaptec SCSI Card 29320LP  Single Channel 64-bit Low Profile        7901A
+                              PCI-X 133MHz to Ultra320 SCSI Card
+                              (One external VHDC, one internal
+                              68-pin)
+   Adaptec SCSI Card 29320ALP Single Channel 64-bit Low Profile        7901B
+                              PCI-X 133MHz to Ultra320 SCSI Card
+                              (One external VHDC, one internal
+                              68-pin)
+   ========================== ===================================== ============
+
+2. Version History
+==================
+
+
+ * 3.0	  (December 1st, 2005)
+	- Updated driver to use SCSI transport class infrastructure
+	- Upported sequencer and core fixes from adaptec released
+	  version 2.0.15 of the driver.
+
+ * 1.3.11 (July 11, 2003)
+        - Fix several deadlock issues.
+        - Add 29320ALP and 39320B Id's.
+
+ * 1.3.10 (June 3rd, 2003)
+        - Align the SCB_TAG field on a 16byte boundary.  This avoids
+          SCB corruption on some PCI-33 busses.
+        - Correct non-zero luns on Rev B. hardware.
+        - Update for change in 2.5.X SCSI proc FS interface.
+        - When negotiation async via an 8bit WDTR message, send
+          an SDTR with an offset of 0 to be sure the target
+          knows we are async.  This works around a firmware defect
+          in the Quantum Atlas 10K.
+        - Implement controller suspend and resume.
+        - Clear PCI error state during driver attach so that we
+          don't disable memory mapped I/O due to a stray write
+          by some other driver probe that occurred before we
+          claimed the controller.
+
+ * 1.3.9 (May 22nd, 2003)
+        - Fix compiler errors.
+        - Remove S/G splitting for segments that cross a 4GB boundary.
+          This is guaranteed not to happen in Linux.
+        - Add support for scsi_report_device_reset() found in
+          2.5.X kernels.
+        - Add 7901B support.
+        - Simplify handling of the packetized lun Rev A workaround.
+        - Correct and simplify handling of the ignore wide residue
+          message.  The previous code would fail to report a residual
+          if the transaction data length was even and we received
+          an IWR message.
+
+ * 1.3.8 (April 29th, 2003)
+        - Fix types accessed via the command line interface code.
+        - Perform a few firmware optimizations.
+        - Fix "Unexpected PKT busfree" errors.
+        - Use a sequencer interrupt to notify the host of
+          commands with bad status.  We defer the notification
+          until there are no outstanding selections to ensure
+          that the host is interrupted for as short a time as
+          possible.
+        - Remove pre-2.2.X support.
+        - Add support for new 2.5.X interrupt API.
+        - Correct big-endian architecture support.
+
+ * 1.3.7 (April 16th, 2003)
+        - Use del_timer_sync() to ensure that no timeouts
+          are pending during controller shutdown.
+        - For pre-2.5.X kernels, carefully adjust our segment
+          list size to avoid SCSI malloc pool fragmentation.
+        - Cleanup channel display in our /proc output.
+        - Workaround duplicate device entries in the mid-layer
+          device list during add-single-device.
+
+ * 1.3.6 (March 28th, 2003)
+        - Correct a double free in the Domain Validation code.
+        - Correct a reference to free'ed memory during controller
+          shutdown.
+        - Reset the bus on an SE->LVD change.  This is required
+          to reset our transceivers.
+
+ * 1.3.5 (March 24th, 2003)
+        - Fix a few register window mode bugs.
+        - Include read streaming in the PPR flags we display in
+          diagnostics as well as /proc.
+        - Add PCI hot plug support for 2.5.X kernels.
+        - Correct default precompensation value for RevA hardware.
+        - Fix Domain Validation thread shutdown.
+        - Add a firmware workaround to make the LED blink
+          brighter during packetized operations on the H2A4.
+        - Correct /proc display of user read streaming settings.
+        - Simplify driver locking by releasing the io_request_lock
+          upon driver entry from the mid-layer.
+        - Cleanup command line parsing and move much of this code
+          to aiclib.
+
+ * 1.3.4 (February 28th, 2003)
+        - Correct a race condition in our error recovery handler.
+        - Allow Test Unit Ready commands to take a full 5 seconds
+          during Domain Validation.
+
+ * 1.3.2 (February 19th, 2003)
+        - Correct a Rev B. regression due to the GEM318
+          compatibility fix included in 1.3.1.
+
+ * 1.3.1 (February 11th, 2003)
+        - Add support for the 39320A.
+        - Improve recovery for certain PCI-X errors.
+        - Fix handling of LQ/DATA/LQ/DATA for the
+          same write transaction that can occur without
+          interveining training.
+        - Correct compatibility issues with the GEM318
+          enclosure services device.
+        - Correct data corruption issue that occurred under
+          high tag depth write loads.
+        - Adapt to a change in the 2.5.X daemonize() API.
+        - Correct a "Missing case in ahd_handle_scsiint" panic.
+
+ * 1.3.0 (January 21st, 2003)
+        - Full regression testing for all U320 products completed.
+        - Added abort and target/lun reset error recovery handler and
+          interrupt coalescing.
+
+ * 1.2.0 (November 14th, 2002)
+        - Added support for Domain Validation
+        - Add support for the Hewlett-Packard version of the 39320D
+          and AIC-7902 adapters.
+
+        Support for previous adapters has not been fully tested and should
+        only be used at the customer's own risk.
+
+ * 1.1.1 (September 24th, 2002)
+        - Added support for the Linux 2.5.X kernel series
+
+ * 1.1.0 (September 17th, 2002)
+        - Added support for four additional SCSI products:
+          ASC-39320, ASC-29320, ASC-29320LP, AIC-7901.
+
+ * 1.0.0 (May 30th, 2002)
+        - Initial driver release.
+
+ * 2.1. Software/Hardware Features
+        - Support for the SPI-4 "Ultra320" standard:
+          - 320MB/s transfer rates
+          - Packetized SCSI Protocol at 160MB/s and 320MB/s
+          - Quick Arbitration Selection (QAS)
+          - Retained Training Information (Rev B. ASIC only)
+        - Interrupt Coalescing
+        - Initiator Mode (target mode not currently
+          supported)
+        - Support for the PCI-X standard up to 133MHz
+        - Support for the PCI v2.2 standard
+        - Domain Validation
+
+ * 2.2. Operating System Support:
+        - Redhat Linux 7.2, 7.3, 8.0, Advanced Server 2.1
+        - SuSE Linux 7.3, 8.0, 8.1, Enterprise Server 7
+        - only Intel and AMD x86 supported at this time
+        - >4GB memory configurations supported.
+
+     Refer to the User's Guide for more details on this.
+
+3. Command Line Options
+=======================
+
+    .. Warning::
+
+	         ALTERING OR ADDING THESE DRIVER PARAMETERS
+                 INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
+                 USE THEM WITH CAUTION.
+
+   Put a .conf file in the /etc/modprobe.d/ directory and add/edit a
+   line containing ``options aic79xx aic79xx=[command[,command...]]`` where
+   ``command`` is one or more of the following:
+
+
+verbose
+    :Definition: enable additional informative messages during driver operation.
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+debug:[value]
+    :Definition: Enables various levels of debugging information
+                 The bit definitions for the debugging mask can
+                 be found in drivers/scsi/aic7xxx/aic79xx.h under
+                 the "Debug" heading.
+    :Possible Values: 0x0000 = no debugging, 0xffff = full debugging
+    :Default Value: 0x0000
+
+no_reset
+    :Definition: Do not reset the bus during the initial probe
+                 phase
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+extended
+    :Definition: Force extended translation on the controller
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+periodic_otag
+    :Definition: Send an ordered tag periodically to prevent
+                 tag starvation.  Needed for some older devices
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+reverse_scan
+    :Definition: Probe the scsi bus in reverse order, starting with target 15
+    :Possible Values: This option is a flag
+    :Default Value: disabled
+
+global_tag_depth
+    :Definition: Global tag depth for all targets on all busses.
+		 This option sets the default tag depth which
+		 may be selectively overridden vi the tag_info
+		 option.
+
+    :Possible Values: 1 - 253
+    :Default Value: 32
+
+tag_info:{{value[,value...]}[,{value[,value...]}...]}
+    :Definition: Set the per-target tagged queue depth on a
+                 per controller basis.  Both controllers and targets
+                 may be omitted indicating that they should retain
+                 the default tag depth.
+
+    :Possible Values: 1 - 253
+    :Default Value: 32
+
+    Examples:
+
+
+	::
+
+	    tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
+
+	On Controller 0
+
+	    - specifies a tag depth of 16 for target 0
+	    - specifies a tag depth of 64 for target 3
+	    - specifies a tag depth of 8 for targets 4 and 5
+	    - leaves target 6 at the default
+	    - specifies a tag depth of 32 for targets 1,2,7-15
+
+	All other targets retain the default depth.
+
+	::
+
+	    tag_info:{{},{32,,32}}
+
+	On Controller 1
+
+	    - specifies a tag depth of 32 for targets 0 and 2
+
+	All other targets retain the default depth.
+
+
+rd_strm: {rd_strm_bitmask[,rd_strm_bitmask...]}
+    :Definition: Enable read streaming on a per target basis.
+		 The rd_strm_bitmask is a 16 bit hex value in which
+		 each bit represents a target.  Setting the target's
+		 bit to '1' enables read streaming for that
+		 target.  Controllers may be omitted indicating that
+		 they should retain the default read streaming setting.
+
+    Examples:
+
+	    ::
+
+		rd_strm:{0x0041}
+
+	    On Controller 0
+
+		- enables read streaming for targets 0 and 6.
+		- disables read streaming for targets 1-5,7-15.
+
+	    All other targets retain the default read
+	    streaming setting.
+
+	    ::
+
+		rd_strm:{0x0023,,0xFFFF}
+
+	    On Controller 0
+
+		- enables read streaming for targets 1,2, and 5.
+		- disables read streaming for targets 3,4,6-15.
+
+	    On Controller 2
+
+		- enables read streaming for all targets.
+
+	    All other targets retain the default read
+	    streaming setting.
+
+    :Possible Values: 0x0000 - 0xffff
+    :Default Value: 0x0000
+
+dv: {value[,value...]}
+    :Definition: Set Domain Validation Policy on a per-controller basis.
+                 Controllers may be omitted indicating that
+                 they should retain the default read streaming setting.
+
+     :Possible Values:
+
+		      ==== ===============================
+		       < 0 Use setting from serial EEPROM.
+                         0 Disable DV
+		       > 0 Enable DV
+		      ==== ===============================
+
+    :Default Value: DV Serial EEPROM configuration setting.
+
+    Example:
+
+	::
+
+	    dv:{-1,0,,1,1,0}
+
+	- On Controller 0 leave DV at its default setting.
+	- On Controller 1 disable DV.
+	- Skip configuration on Controller 2.
+	- On Controllers 3 and 4 enable DV.
+	- On Controller 5 disable DV.
+
+seltime:[value]
+    :Definition: Specifies the selection timeout value
+    :Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
+    :Default Value: 0
+
+.. Warning:
+
+    The following three options should only be changed at
+    the direction of a technical support representative.
+
+
+precomp: {value[,value...]}
+    :Definition: Set IO Cell precompensation value on a per-controller basis.
+                 Controllers may be omitted indicating that
+                 they should retain the default precompensation setting.
+
+    :Possible Values: 0 - 7
+    :Default Value: Varies based on chip revision
+
+    Examples:
+
+	::
+
+	    precomp:{0x1}
+
+	On Controller 0 set precompensation to 1.
+
+	::
+
+	    precomp:{1,,7}
+
+	- On Controller 0 set precompensation to 1.
+	- On Controller 2 set precompensation to 8.
+
+slewrate: {value[,value...]}
+    :Definition: Set IO Cell slew rate on a per-controller basis.
+                      Controllers may be omitted indicating that
+                      they should retain the default slew rate setting.
+
+    :Possible Values: 0 - 15
+    :Default Value: Varies based on chip revision
+
+    Examples:
+
+	::
+
+	    slewrate:{0x1}
+
+	- On Controller 0 set slew rate to 1.
+
+	::
+
+	    slewrate :{1,,8}
+
+	- On Controller 0 set slew rate to 1.
+	- On Controller 2 set slew rate to 8.
+
+amplitude: {value[,value...]}
+    :Definition: Set IO Cell signal amplitude on a per-controller basis.
+                 Controllers may be omitted indicating that
+                 they should retain the default read streaming setting.
+
+    :Possible Values: 1 - 7
+    :Default Value: Varies based on chip revision
+
+    Examples:
+
+    ::
+
+	amplitude:{0x1}
+
+    On Controller 0 set amplitude to 1.
+
+    ::
+
+	amplitude :{1,,7}
+
+    - On Controller 0 set amplitude to 1.
+    - On Controller 2 set amplitude to 7.
+
+Example::
+
+    options aic79xx aic79xx=verbose,rd_strm:{{0x0041}}
+
+enables verbose output in the driver and turns read streaming on
+for targets 0 and 6 of Controller 0.
+
+4. Additional Notes
+===================
+
+4.1. Known/Unresolved or FYI Issues
+-----------------------------------
+
+        * Under SuSE Linux Enterprise 7, the driver may fail to operate
+          correctly due to a problem with PCI interrupt routing in the
+          Linux kernel.  Please contact SuSE for an updated Linux
+          kernel.
+
+4.2. Third-Party Compatibility Issues
+-------------------------------------
+
+        * Adaptec only supports Ultra320 hard drives running
+          the latest firmware available. Please check with
+          your hard drive manufacturer to ensure you have the
+          latest version.
+
+4.3. Operating System or Technology Limitations
+-----------------------------------------------
+
+        * PCI Hot Plug is untested and may cause the operating system
+          to stop responding.
+        * Luns that are not numbered contiguously starting with 0 might not
+          be automatically probed during system startup.  This is a limitation
+          of the OS.  Please contact your Linux vendor for instructions on
+          manually probing non-contiguous luns.
+        * Using the Driver Update Disk version of this package during OS
+          installation under RedHat might result in two versions of this
+          driver being installed into the system module directory.  This
+          might cause problems with the /sbin/mkinitrd program and/or
+          other RPM packages that try to install system modules.  The best
+          way to correct this once the system is running is to install
+          the latest RPM package version of this driver, available from
+          http://www.adaptec.com.
+
+
+5. Adaptec Customer Support
+===========================
+
+   A Technical Support Identification (TSID) Number is required for
+   Adaptec technical support.
+
+    - The 12-digit TSID can be found on the white barcode-type label
+      included inside the box with your product.  The TSID helps us
+      provide more efficient service by accurately identifying your
+      product and support status.
+
+   Support Options
+    - Search the Adaptec Support Knowledgebase (ASK) at
+      http://ask.adaptec.com for articles, troubleshooting tips, and
+      frequently asked questions about your product.
+    - For support via Email, submit your question to Adaptec's
+      Technical Support Specialists at http://ask.adaptec.com/.
+
+   North America
+    - Visit our Web site at http://www.adaptec.com/.
+    - For information about Adaptec's support options, call
+      408-957-2550, 24 hours a day, 7 days a week.
+    - To speak with a Technical Support Specialist,
+
+      * For hardware products, call 408-934-7274,
+        Monday to Friday, 3:00 am to 5:00 pm, PDT.
+      * For RAID and Fibre Channel products, call 321-207-2000,
+        Monday to Friday, 3:00 am to 5:00 pm, PDT.
+
+      To expedite your service, have your computer with you.
+    - To order Adaptec products, including accessories and cables,
+      call 408-957-7274.  To order cables online go to
+      http://www.adaptec.com/buy-cables/.
+
+   Europe
+    - Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
+    - To speak with a Technical Support Specialist, call, or email,
+
+      * German:  +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
+        http://ask-de.adaptec.com/.
+      * French:  +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
+	http://ask-fr.adaptec.com/.
+      * English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
+	http://ask.adaptec.com/.
+
+    - You can order Adaptec cables online at
+      http://www.adaptec.com/buy-cables/.
+
+   Japan
+    - Visit our web site at http://www.adaptec.co.jp/.
+    - To speak with a Technical Support Specialist, call
+      +81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
+      1:00 p.m. to 6:00 p.m.
+
+Copyright |copy| 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
+All rights reserved.
+
+You are permitted to redistribute, use and modify this README file in whole
+or in part in conjunction with redistribution of software governed by the
+General Public License, provided that the following conditions are met:
+
+1. Redistributions of README file must retain the above copyright
+   notice, this list of conditions, and the following disclaimer,
+   without modification.
+2. The name of the author may not be used to endorse or promote products
+   derived from this software without specific prior written permission.
+3. Modifications or new contributions must be attributed in a copyright
+   notice identifying the author ("Contributor") and added below the
+   original copyright notice. The copyright notice is for purposes of
+   identifying contributors and should not be deemed as permission to alter
+   the permissions given by Adaptec.
+
+THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS`` AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
+WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
+FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.