Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 428 insertions, 0 deletions

diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst
new file mode 100644
index 000000000..9bc9db8ec
--- /dev/null
+++ b/Documentation/security/keys/trusted-encrypted.rst
@@ -0,0 +1,428 @@
+==========================
+Trusted and Encrypted Keys
+==========================
+
+Trusted and Encrypted Keys are two new key types added to the existing kernel
+key ring service.  Both of these new types are variable length symmetric keys,
+and in both cases all keys are created in the kernel, and user space sees,
+stores, and loads only encrypted blobs.  Trusted Keys require the availability
+of a Trust Source for greater security, while Encrypted Keys can be used on any
+system. All user level blobs, are displayed and loaded in hex ASCII for
+convenience, and are integrity verified.
+
+
+Trust Source
+============
+
+A trust source provides the source of security for Trusted Keys.  This
+section lists currently supported trust sources, along with their security
+considerations.  Whether or not a trust source is sufficiently safe depends
+on the strength and correctness of its implementation, as well as the threat
+environment for a specific use case.  Since the kernel doesn't know what the
+environment is, and there is no metric of trust, it is dependent on the
+consumer of the Trusted Keys to determine if the trust source is sufficiently
+safe.
+
+  *  Root of trust for storage
+
+     (1) TPM (Trusted Platform Module: hardware device)
+
+         Rooted to Storage Root Key (SRK) which never leaves the TPM that
+         provides crypto operation to establish root of trust for storage.
+
+     (2) TEE (Trusted Execution Environment: OP-TEE based on Arm TrustZone)
+
+         Rooted to Hardware Unique Key (HUK) which is generally burnt in on-chip
+         fuses and is accessible to TEE only.
+
+     (3) CAAM (Cryptographic Acceleration and Assurance Module: IP on NXP SoCs)
+
+         When High Assurance Boot (HAB) is enabled and the CAAM is in secure
+         mode, trust is rooted to the OTPMK, a never-disclosed 256-bit key
+         randomly generated and fused into each SoC at manufacturing time.
+         Otherwise, a common fixed test key is used instead.
+
+  *  Execution isolation
+
+     (1) TPM
+
+         Fixed set of operations running in isolated execution environment.
+
+     (2) TEE
+
+         Customizable set of operations running in isolated execution
+         environment verified via Secure/Trusted boot process.
+
+     (3) CAAM
+
+         Fixed set of operations running in isolated execution environment.
+
+  * Optional binding to platform integrity state
+
+     (1) TPM
+
+         Keys can be optionally sealed to specified PCR (integrity measurement)
+         values, and only unsealed by the TPM, if PCRs and blob integrity
+         verifications match. A loaded Trusted Key can be updated with new
+         (future) PCR values, so keys are easily migrated to new PCR values,
+         such as when the kernel and initramfs are updated. The same key can
+         have many saved blobs under different PCR values, so multiple boots are
+         easily supported.
+
+     (2) TEE
+
+         Relies on Secure/Trusted boot process for platform integrity. It can
+         be extended with TEE based measured boot process.
+
+     (3) CAAM
+
+         Relies on the High Assurance Boot (HAB) mechanism of NXP SoCs
+         for platform integrity.
+
+  *  Interfaces and APIs
+
+     (1) TPM
+
+         TPMs have well-documented, standardized interfaces and APIs.
+
+     (2) TEE
+
+         TEEs have well-documented, standardized client interface and APIs. For
+         more details refer to ``Documentation/staging/tee.rst``.
+
+     (3) CAAM
+
+         Interface is specific to silicon vendor.
+
+  *  Threat model
+
+     The strength and appropriateness of a particular trust source for a given
+     purpose must be assessed when using them to protect security-relevant data.
+
+
+Key Generation
+==============
+
+Trusted Keys
+------------
+
+New keys are created from random numbers. They are encrypted/decrypted using
+a child key in the storage key hierarchy. Encryption and decryption of the
+child key must be protected by a strong access control policy within the
+trust source. The random number generator in use differs according to the
+selected trust source:
+
+  *  TPM: hardware device based RNG
+
+     Keys are generated within the TPM. Strength of random numbers may vary
+     from one device manufacturer to another.
+
+  *  TEE: OP-TEE based on Arm TrustZone based RNG
+
+     RNG is customizable as per platform needs. It can either be direct output
+     from platform specific hardware RNG or a software based Fortuna CSPRNG
+     which can be seeded via multiple entropy sources.
+
+  *  CAAM: Kernel RNG
+
+     The normal kernel random number generator is used. To seed it from the
+     CAAM HWRNG, enable CRYPTO_DEV_FSL_CAAM_RNG_API and ensure the device
+     is probed.
+
+Users may override this by specifying ``trusted.rng=kernel`` on the kernel
+command-line to override the used RNG with the kernel's random number pool.
+
+Encrypted Keys
+--------------
+
+Encrypted keys do not depend on a trust source, and are faster, as they use AES
+for encryption/decryption. New keys are created either from kernel-generated
+random numbers or user-provided decrypted data, and are encrypted/decrypted
+using a specified ‘master’ key. The ‘master’ key can either be a trusted-key or
+user-key type. The main disadvantage of encrypted keys is that if they are not
+rooted in a trusted key, they are only as secure as the user key encrypting
+them. The master user key should therefore be loaded in as secure a way as
+possible, preferably early in boot.
+
+
+Usage
+=====
+
+Trusted Keys usage: TPM
+-----------------------
+
+TPM 1.2: By default, trusted keys are sealed under the SRK, which has the
+default authorization value (20 bytes of 0s).  This can be set at takeownership
+time with the TrouSerS utility: "tpm_takeownership -u -z".
+
+TPM 2.0: The user must first create a storage key and make it persistent, so the
+key is available after reboot. This can be done using the following commands.
+
+With the IBM TSS 2 stack::
+
+  #> tsscreateprimary -hi o -st
+  Handle 80000000
+  #> tssevictcontrol -hi o -ho 80000000 -hp 81000001
+
+Or with the Intel TSS 2 stack::
+
+  #> tpm2_createprimary --hierarchy o -G rsa2048 -c key.ctxt
+  [...]
+  #> tpm2_evictcontrol -c key.ctxt 0x81000001
+  persistentHandle: 0x81000001
+
+Usage::
+
+    keyctl add trusted name "new keylen [options]" ring
+    keyctl add trusted name "load hex_blob [pcrlock=pcrnum]" ring
+    keyctl update key "update [options]"
+    keyctl print keyid
+
+    options:
+       keyhandle=    ascii hex value of sealing key
+                       TPM 1.2: default 0x40000000 (SRK)
+                       TPM 2.0: no default; must be passed every time
+       keyauth=	     ascii hex auth for sealing key default 0x00...i
+                     (40 ascii zeros)
+       blobauth=     ascii hex auth for sealed data default 0x00...
+                     (40 ascii zeros)
+       pcrinfo=	     ascii hex of PCR_INFO or PCR_INFO_LONG (no default)
+       pcrlock=	     pcr number to be extended to "lock" blob
+       migratable=   0|1 indicating permission to reseal to new PCR values,
+                     default 1 (resealing allowed)
+       hash=         hash algorithm name as a string. For TPM 1.x the only
+                     allowed value is sha1. For TPM 2.x the allowed values
+                     are sha1, sha256, sha384, sha512 and sm3-256.
+       policydigest= digest for the authorization policy. must be calculated
+                     with the same hash algorithm as specified by the 'hash='
+                     option.
+       policyhandle= handle to an authorization policy session that defines the
+                     same policy and with the same hash algorithm as was used to
+                     seal the key.
+
+"keyctl print" returns an ascii hex copy of the sealed key, which is in standard
+TPM_STORED_DATA format.  The key length for new keys are always in bytes.
+Trusted Keys can be 32 - 128 bytes (256 - 1024 bits), the upper limit is to fit
+within the 2048 bit SRK (RSA) keylength, with all necessary structure/padding.
+
+Trusted Keys usage: TEE
+-----------------------
+
+Usage::
+
+    keyctl add trusted name "new keylen" ring
+    keyctl add trusted name "load hex_blob" ring
+    keyctl print keyid
+
+"keyctl print" returns an ASCII hex copy of the sealed key, which is in format
+specific to TEE device implementation.  The key length for new keys is always
+in bytes. Trusted Keys can be 32 - 128 bytes (256 - 1024 bits).
+
+Trusted Keys usage: CAAM
+------------------------
+
+Usage::
+
+    keyctl add trusted name "new keylen" ring
+    keyctl add trusted name "load hex_blob" ring
+    keyctl print keyid
+
+"keyctl print" returns an ASCII hex copy of the sealed key, which is in a
+CAAM-specific format.  The key length for new keys is always in bytes.
+Trusted Keys can be 32 - 128 bytes (256 - 1024 bits).
+
+Encrypted Keys usage
+--------------------
+
+The decrypted portion of encrypted keys can contain either a simple symmetric
+key or a more complex structure. The format of the more complex structure is
+application specific, which is identified by 'format'.
+
+Usage::
+
+    keyctl add encrypted name "new [format] key-type:master-key-name keylen"
+        ring
+    keyctl add encrypted name "new [format] key-type:master-key-name keylen
+        decrypted-data" ring
+    keyctl add encrypted name "load hex_blob" ring
+    keyctl update keyid "update key-type:master-key-name"
+
+Where::
+
+	format:= 'default | ecryptfs | enc32'
+	key-type:= 'trusted' | 'user'
+
+Examples of trusted and encrypted key usage
+-------------------------------------------
+
+Create and save a trusted key named "kmk" of length 32 bytes.
+
+Note: When using a TPM 2.0 with a persistent key with handle 0x81000001,
+append 'keyhandle=0x81000001' to statements between quotes, such as
+"new 32 keyhandle=0x81000001".
+
+::
+
+    $ keyctl add trusted kmk "new 32" @u
+    440502848
+
+    $ keyctl show
+    Session Keyring
+           -3 --alswrv    500   500  keyring: _ses
+     97833714 --alswrv    500    -1   \_ keyring: _uid.500
+    440502848 --alswrv    500   500       \_ trusted: kmk
+
+    $ keyctl print 440502848
+    0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915
+    3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b
+    27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722
+    a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec
+    d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d
+    dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0
+    f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b
+    e4a8aea2b607ec96931e6f4d4fe563ba
+
+    $ keyctl pipe 440502848 > kmk.blob
+
+Load a trusted key from the saved blob::
+
+    $ keyctl add trusted kmk "load `cat kmk.blob`" @u
+    268728824
+
+    $ keyctl print 268728824
+    0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915
+    3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b
+    27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722
+    a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec
+    d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d
+    dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0
+    f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b
+    e4a8aea2b607ec96931e6f4d4fe563ba
+
+Reseal (TPM specific) a trusted key under new PCR values::
+
+    $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`"
+    $ keyctl print 268728824
+    010100000000002c0002800093c35a09b70fff26e7a98ae786c641e678ec6ffb6b46d805
+    77c8a6377aed9d3219c6dfec4b23ffe3000001005d37d472ac8a44023fbb3d18583a4f73
+    d3a076c0858f6f1dcaa39ea0f119911ff03f5406df4f7f27f41da8d7194f45c9f4e00f2e
+    df449f266253aa3f52e55c53de147773e00f0f9aca86c64d94c95382265968c354c5eab4
+    9638c5ae99c89de1e0997242edfb0b501744e11ff9762dfd951cffd93227cc513384e7e6
+    e782c29435c7ec2edafaa2f4c1fe6e7a781b59549ff5296371b42133777dcc5b8b971610
+    94bc67ede19e43ddb9dc2baacad374a36feaf0314d700af0a65c164b7082401740e489c9
+    7ef6a24defe4846104209bf0c3eced7fa1a672ed5b125fc9d8cd88b476a658a4434644ef
+    df8ae9a178e9f83ba9f08d10fa47e4226b98b0702f06b3b8
+
+
+The initial consumer of trusted keys is EVM, which at boot time needs a high
+quality symmetric key for HMAC protection of file metadata. The use of a
+trusted key provides strong guarantees that the EVM key has not been
+compromised by a user level problem, and when sealed to a platform integrity
+state, protects against boot and offline attacks. Create and save an
+encrypted key "evm" using the above trusted key "kmk":
+
+option 1: omitting 'format'::
+
+    $ keyctl add encrypted evm "new trusted:kmk 32" @u
+    159771175
+
+option 2: explicitly defining 'format' as 'default'::
+
+    $ keyctl add encrypted evm "new default trusted:kmk 32" @u
+    159771175
+
+    $ keyctl print 159771175
+    default trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b3
+    82dbbc55be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e0
+    24717c64 5972dcb82ab2dde83376d82b2e3c09ffc
+
+    $ keyctl pipe 159771175 > evm.blob
+
+Load an encrypted key "evm" from saved blob::
+
+    $ keyctl add encrypted evm "load `cat evm.blob`" @u
+    831684262
+
+    $ keyctl print 831684262
+    default trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b3
+    82dbbc55be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e0
+    24717c64 5972dcb82ab2dde83376d82b2e3c09ffc
+
+Instantiate an encrypted key "evm" using user-provided decrypted data::
+
+    $ evmkey=$(dd if=/dev/urandom bs=1 count=32 | xxd -c32 -p)
+    $ keyctl add encrypted evm "new default user:kmk 32 $evmkey" @u
+    794890253
+
+    $ keyctl print 794890253
+    default user:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382d
+    bbc55be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e0247
+    17c64 5972dcb82ab2dde83376d82b2e3c09ffc
+
+Other uses for trusted and encrypted keys, such as for disk and file encryption
+are anticipated.  In particular the new format 'ecryptfs' has been defined
+in order to use encrypted keys to mount an eCryptfs filesystem.  More details
+about the usage can be found in the file
+``Documentation/security/keys/ecryptfs.rst``.
+
+Another new format 'enc32' has been defined in order to support encrypted keys
+with payload size of 32 bytes. This will initially be used for nvdimm security
+but may expand to other usages that require 32 bytes payload.
+
+
+TPM 2.0 ASN.1 Key Format
+------------------------
+
+The TPM 2.0 ASN.1 key format is designed to be easily recognisable,
+even in binary form (fixing a problem we had with the TPM 1.2 ASN.1
+format) and to be extensible for additions like importable keys and
+policy::
+
+    TPMKey ::= SEQUENCE {
+        type		OBJECT IDENTIFIER
+        emptyAuth	[0] EXPLICIT BOOLEAN OPTIONAL
+        parent		INTEGER
+        pubkey		OCTET STRING
+        privkey		OCTET STRING
+    }
+
+type is what distinguishes the key even in binary form since the OID
+is provided by the TCG to be unique and thus forms a recognizable
+binary pattern at offset 3 in the key.  The OIDs currently made
+available are::
+
+    2.23.133.10.1.3 TPM Loadable key.  This is an asymmetric key (Usually
+                    RSA2048 or Elliptic Curve) which can be imported by a
+                    TPM2_Load() operation.
+
+    2.23.133.10.1.4 TPM Importable Key.  This is an asymmetric key (Usually
+                    RSA2048 or Elliptic Curve) which can be imported by a
+                    TPM2_Import() operation.
+
+    2.23.133.10.1.5 TPM Sealed Data.  This is a set of data (up to 128
+                    bytes) which is sealed by the TPM.  It usually
+                    represents a symmetric key and must be unsealed before
+                    use.
+
+The trusted key code only uses the TPM Sealed Data OID.
+
+emptyAuth is true if the key has well known authorization "".  If it
+is false or not present, the key requires an explicit authorization
+phrase.  This is used by most user space consumers to decide whether
+to prompt for a password.
+
+parent represents the parent key handle, either in the 0x81 MSO space,
+like 0x81000001 for the RSA primary storage key.  Userspace programmes
+also support specifying the primary handle in the 0x40 MSO space.  If
+this happens the Elliptic Curve variant of the primary key using the
+TCG defined template will be generated on the fly into a volatile
+object and used as the parent.  The current kernel code only supports
+the 0x81 MSO form.
+
+pubkey is the binary representation of TPM2B_PRIVATE excluding the
+initial TPM2B header, which can be reconstructed from the ASN.1 octet
+string length.
+
+privkey is the binary representation of TPM2B_PUBLIC excluding the
+initial TPM2B header which can be reconstructed from the ASN.1 octed
+string length.