Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 131 insertions, 0 deletions

diff --git a/Documentation/security/lsm.rst b/Documentation/security/lsm.rst
new file mode 100644
index 000000000..6a2a2e973
--- /dev/null
+++ b/Documentation/security/lsm.rst
@@ -0,0 +1,131 @@
+========================================================
+Linux Security Modules: General Security Hooks for Linux
+========================================================
+
+:Author: Stephen Smalley
+:Author: Timothy Fraser
+:Author: Chris Vance
+
+.. note::
+
+   The APIs described in this book are outdated.
+
+Introduction
+============
+
+In March 2001, the National Security Agency (NSA) gave a presentation
+about Security-Enhanced Linux (SELinux) at the 2.5 Linux Kernel Summit.
+SELinux is an implementation of flexible and fine-grained
+nondiscretionary access controls in the Linux kernel, originally
+implemented as its own particular kernel patch. Several other security
+projects (e.g. RSBAC, Medusa) have also developed flexible access
+control architectures for the Linux kernel, and various projects have
+developed particular access control models for Linux (e.g. LIDS, DTE,
+SubDomain). Each project has developed and maintained its own kernel
+patch to support its security needs.
+
+In response to the NSA presentation, Linus Torvalds made a set of
+remarks that described a security framework he would be willing to
+consider for inclusion in the mainstream Linux kernel. He described a
+general framework that would provide a set of security hooks to control
+operations on kernel objects and a set of opaque security fields in
+kernel data structures for maintaining security attributes. This
+framework could then be used by loadable kernel modules to implement any
+desired model of security. Linus also suggested the possibility of
+migrating the Linux capabilities code into such a module.
+
+The Linux Security Modules (LSM) project was started by WireX to develop
+such a framework. LSM was a joint development effort by several security
+projects, including Immunix, SELinux, SGI and Janus, and several
+individuals, including Greg Kroah-Hartman and James Morris, to develop a
+Linux kernel patch that implements this framework. The work was
+incorporated in the mainstream in December of 2003. This technical
+report provides an overview of the framework and the capabilities
+security module.
+
+LSM Framework
+=============
+
+The LSM framework provides a general kernel framework to support
+security modules. In particular, the LSM framework is primarily focused
+on supporting access control modules, although future development is
+likely to address other security needs such as sandboxing. By itself, the
+framework does not provide any additional security; it merely provides
+the infrastructure to support security modules. The LSM framework is
+optional, requiring `CONFIG_SECURITY` to be enabled. The capabilities
+logic is implemented as a security module.
+This capabilities module is discussed further in
+`LSM Capabilities Module`_.
+
+The LSM framework includes security fields in kernel data structures and
+calls to hook functions at critical points in the kernel code to
+manage the security fields and to perform access control.
+It also adds functions for registering security modules.
+An interface `/sys/kernel/security/lsm` reports a comma separated list
+of security modules that are active on the system.
+
+The LSM security fields are simply ``void*`` pointers.
+The data is referred to as a blob, which may be managed by
+the framework or by the individual security modules that use it.
+Security blobs that are used by more than one security module are
+typically managed by the framework.
+For process and
+program execution security information, security fields are included in
+:c:type:`struct task_struct <task_struct>` and
+:c:type:`struct cred <cred>`.
+For filesystem
+security information, a security field is included in :c:type:`struct
+super_block <super_block>`. For pipe, file, and socket security
+information, security fields are included in :c:type:`struct inode
+<inode>` and :c:type:`struct file <file>`.
+For System V IPC security information,
+security fields were added to :c:type:`struct kern_ipc_perm
+<kern_ipc_perm>` and :c:type:`struct msg_msg
+<msg_msg>`; additionally, the definitions for :c:type:`struct
+msg_msg <msg_msg>`, struct msg_queue, and struct shmid_kernel
+were moved to header files (``include/linux/msg.h`` and
+``include/linux/shm.h`` as appropriate) to allow the security modules to
+use these definitions.
+
+For packet and
+network device security information, security fields were added to
+:c:type:`struct sk_buff <sk_buff>` and
+:c:type:`struct scm_cookie <scm_cookie>`.
+Unlike the other security module data, the data used here is a
+32-bit integer. The security modules are required to map or otherwise
+associate these values with real security attributes.
+
+LSM hooks are maintained in lists. A list is maintained for each
+hook, and the hooks are called in the order specified by CONFIG_LSM.
+Detailed documentation for each hook is
+included in the `include/linux/lsm_hooks.h` header file.
+
+The LSM framework provides for a close approximation of
+general security module stacking. It defines
+security_add_hooks() to which each security module passes a
+:c:type:`struct security_hooks_list <security_hooks_list>`,
+which are added to the lists.
+The LSM framework does not provide a mechanism for removing hooks that
+have been registered. The SELinux security module has implemented
+a way to remove itself, however the feature has been deprecated.
+
+The hooks can be viewed as falling into two major
+categories: hooks that are used to manage the security fields and hooks
+that are used to perform access control. Examples of the first category
+of hooks include the security_inode_alloc() and security_inode_free()
+These hooks are used to allocate
+and free security structures for inode objects.
+An example of the second category of hooks
+is the security_inode_permission() hook.
+This hook checks permission when accessing an inode.
+
+LSM Capabilities Module
+=======================
+
+The POSIX.1e capabilities logic is maintained as a security module
+stored in the file ``security/commoncap.c``. The capabilities
+module uses the order field of the :c:type:`lsm_info` description
+to identify it as the first security module to be registered.
+The capabilities security module does not use the general security
+blobs, unlike other modules. The reasons are historical and are
+based on overhead, complexity and performance concerns.