Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 199 insertions, 0 deletions

diff --git a/Documentation/security/siphash.rst b/Documentation/security/siphash.rst
new file mode 100644
index 000000000..023bd95c7
--- /dev/null
+++ b/Documentation/security/siphash.rst
@@ -0,0 +1,199 @@
+===========================
+SipHash - a short input PRF
+===========================
+
+:Author: Written by Jason A. Donenfeld <jason@zx2c4.com>
+
+SipHash is a cryptographically secure PRF -- a keyed hash function -- that
+performs very well for short inputs, hence the name. It was designed by
+cryptographers Daniel J. Bernstein and Jean-Philippe Aumasson. It is intended
+as a replacement for some uses of: `jhash`, `md5_transform`, `sha1_transform`,
+and so forth.
+
+SipHash takes a secret key filled with randomly generated numbers and either
+an input buffer or several input integers. It spits out an integer that is
+indistinguishable from random. You may then use that integer as part of secure
+sequence numbers, secure cookies, or mask it off for use in a hash table.
+
+Generating a key
+================
+
+Keys should always be generated from a cryptographically secure source of
+random numbers, either using get_random_bytes or get_random_once::
+
+	siphash_key_t key;
+	get_random_bytes(&key, sizeof(key));
+
+If you're not deriving your key from here, you're doing it wrong.
+
+Using the functions
+===================
+
+There are two variants of the function, one that takes a list of integers, and
+one that takes a buffer::
+
+	u64 siphash(const void *data, size_t len, const siphash_key_t *key);
+
+And::
+
+	u64 siphash_1u64(u64, const siphash_key_t *key);
+	u64 siphash_2u64(u64, u64, const siphash_key_t *key);
+	u64 siphash_3u64(u64, u64, u64, const siphash_key_t *key);
+	u64 siphash_4u64(u64, u64, u64, u64, const siphash_key_t *key);
+	u64 siphash_1u32(u32, const siphash_key_t *key);
+	u64 siphash_2u32(u32, u32, const siphash_key_t *key);
+	u64 siphash_3u32(u32, u32, u32, const siphash_key_t *key);
+	u64 siphash_4u32(u32, u32, u32, u32, const siphash_key_t *key);
+
+If you pass the generic siphash function something of a constant length, it
+will constant fold at compile-time and automatically choose one of the
+optimized functions.
+
+Hashtable key function usage::
+
+	struct some_hashtable {
+		DECLARE_HASHTABLE(hashtable, 8);
+		siphash_key_t key;
+	};
+
+	void init_hashtable(struct some_hashtable *table)
+	{
+		get_random_bytes(&table->key, sizeof(table->key));
+	}
+
+	static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+	{
+		return &table->hashtable[siphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
+	}
+
+You may then iterate like usual over the returned hash bucket.
+
+Security
+========
+
+SipHash has a very high security margin, with its 128-bit key. So long as the
+key is kept secret, it is impossible for an attacker to guess the outputs of
+the function, even if being able to observe many outputs, since 2^128 outputs
+is significant.
+
+Linux implements the "2-4" variant of SipHash.
+
+Struct-passing Pitfalls
+=======================
+
+Often times the XuY functions will not be large enough, and instead you'll
+want to pass a pre-filled struct to siphash. When doing this, it's important
+to always ensure the struct has no padding holes. The easiest way to do this
+is to simply arrange the members of the struct in descending order of size,
+and to use offsetofend() instead of sizeof() for getting the size. For
+performance reasons, if possible, it's probably a good thing to align the
+struct to the right boundary. Here's an example::
+
+	const struct {
+		struct in6_addr saddr;
+		u32 counter;
+		u16 dport;
+	} __aligned(SIPHASH_ALIGNMENT) combined = {
+		.saddr = *(struct in6_addr *)saddr,
+		.counter = counter,
+		.dport = dport
+	};
+	u64 h = siphash(&combined, offsetofend(typeof(combined), dport), &secret);
+
+Resources
+=========
+
+Read the SipHash paper if you're interested in learning more:
+https://131002.net/siphash/siphash.pdf
+
+-------------------------------------------------------------------------------
+
+===============================================
+HalfSipHash - SipHash's insecure younger cousin
+===============================================
+
+:Author: Written by Jason A. Donenfeld <jason@zx2c4.com>
+
+On the off-chance that SipHash is not fast enough for your needs, you might be
+able to justify using HalfSipHash, a terrifying but potentially useful
+possibility. HalfSipHash cuts SipHash's rounds down from "2-4" to "1-3" and,
+even scarier, uses an easily brute-forcable 64-bit key (with a 32-bit output)
+instead of SipHash's 128-bit key. However, this may appeal to some
+high-performance `jhash` users.
+
+HalfSipHash support is provided through the "hsiphash" family of functions.
+
+.. warning::
+   Do not ever use the hsiphash functions except for as a hashtable key
+   function, and only then when you can be absolutely certain that the outputs
+   will never be transmitted out of the kernel. This is only remotely useful
+   over `jhash` as a means of mitigating hashtable flooding denial of service
+   attacks.
+
+On 64-bit kernels, the hsiphash functions actually implement SipHash-1-3, a
+reduced-round variant of SipHash, instead of HalfSipHash-1-3. This is because in
+64-bit code, SipHash-1-3 is no slower than HalfSipHash-1-3, and can be faster.
+Note, this does *not* mean that in 64-bit kernels the hsiphash functions are the
+same as the siphash ones, or that they are secure; the hsiphash functions still
+use a less secure reduced-round algorithm and truncate their outputs to 32
+bits.
+
+Generating a hsiphash key
+=========================
+
+Keys should always be generated from a cryptographically secure source of
+random numbers, either using get_random_bytes or get_random_once::
+
+	hsiphash_key_t key;
+	get_random_bytes(&key, sizeof(key));
+
+If you're not deriving your key from here, you're doing it wrong.
+
+Using the hsiphash functions
+============================
+
+There are two variants of the function, one that takes a list of integers, and
+one that takes a buffer::
+
+	u32 hsiphash(const void *data, size_t len, const hsiphash_key_t *key);
+
+And::
+
+	u32 hsiphash_1u32(u32, const hsiphash_key_t *key);
+	u32 hsiphash_2u32(u32, u32, const hsiphash_key_t *key);
+	u32 hsiphash_3u32(u32, u32, u32, const hsiphash_key_t *key);
+	u32 hsiphash_4u32(u32, u32, u32, u32, const hsiphash_key_t *key);
+
+If you pass the generic hsiphash function something of a constant length, it
+will constant fold at compile-time and automatically choose one of the
+optimized functions.
+
+Hashtable key function usage
+============================
+
+::
+
+	struct some_hashtable {
+		DECLARE_HASHTABLE(hashtable, 8);
+		hsiphash_key_t key;
+	};
+
+	void init_hashtable(struct some_hashtable *table)
+	{
+		get_random_bytes(&table->key, sizeof(table->key));
+	}
+
+	static inline hlist_head *some_hashtable_bucket(struct some_hashtable *table, struct interesting_input *input)
+	{
+		return &table->hashtable[hsiphash(input, sizeof(*input), &table->key) & (HASH_SIZE(table->hashtable) - 1)];
+	}
+
+You may then iterate like usual over the returned hash bucket.
+
+Performance
+===========
+
+hsiphash() is roughly 3 times slower than jhash(). For many replacements, this
+will not be a problem, as the hashtable lookup isn't the bottleneck. And in
+general, this is probably a good sacrifice to make for the security and DoS
+resistance of hsiphash().