Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 286 insertions, 0 deletions

diff --git a/Documentation/sparc/adi.rst b/Documentation/sparc/adi.rst
new file mode 100644
index 000000000..857ad30f9
--- /dev/null
+++ b/Documentation/sparc/adi.rst
@@ -0,0 +1,286 @@
+================================
+Application Data Integrity (ADI)
+================================
+
+SPARC M7 processor adds the Application Data Integrity (ADI) feature.
+ADI allows a task to set version tags on any subset of its address
+space. Once ADI is enabled and version tags are set for ranges of
+address space of a task, the processor will compare the tag in pointers
+to memory in these ranges to the version set by the application
+previously. Access to memory is granted only if the tag in given pointer
+matches the tag set by the application. In case of mismatch, processor
+raises an exception.
+
+Following steps must be taken by a task to enable ADI fully:
+
+1. Set the user mode PSTATE.mcde bit. This acts as master switch for
+   the task's entire address space to enable/disable ADI for the task.
+
+2. Set TTE.mcd bit on any TLB entries that correspond to the range of
+   addresses ADI is being enabled on. MMU checks the version tag only
+   on the pages that have TTE.mcd bit set.
+
+3. Set the version tag for virtual addresses using stxa instruction
+   and one of the MCD specific ASIs. Each stxa instruction sets the
+   given tag for one ADI block size number of bytes. This step must
+   be repeated for entire page to set tags for entire page.
+
+ADI block size for the platform is provided by the hypervisor to kernel
+in machine description tables. Hypervisor also provides the number of
+top bits in the virtual address that specify the version tag.  Once
+version tag has been set for a memory location, the tag is stored in the
+physical memory and the same tag must be present in the ADI version tag
+bits of the virtual address being presented to the MMU. For example on
+SPARC M7 processor, MMU uses bits 63-60 for version tags and ADI block
+size is same as cacheline size which is 64 bytes. A task that sets ADI
+version to, say 10, on a range of memory, must access that memory using
+virtual addresses that contain 0xa in bits 63-60.
+
+ADI is enabled on a set of pages using mprotect() with PROT_ADI flag.
+When ADI is enabled on a set of pages by a task for the first time,
+kernel sets the PSTATE.mcde bit fot the task. Version tags for memory
+addresses are set with an stxa instruction on the addresses using
+ASI_MCD_PRIMARY or ASI_MCD_ST_BLKINIT_PRIMARY. ADI block size is
+provided by the hypervisor to the kernel.  Kernel returns the value of
+ADI block size to userspace using auxiliary vector along with other ADI
+info. Following auxiliary vectors are provided by the kernel:
+
+	============	===========================================
+	AT_ADI_BLKSZ	ADI block size. This is the granularity and
+			alignment, in bytes, of ADI versioning.
+	AT_ADI_NBITS	Number of ADI version bits in the VA
+	============	===========================================
+
+
+IMPORTANT NOTES
+===============
+
+- Version tag values of 0x0 and 0xf are reserved. These values match any
+  tag in virtual address and never generate a mismatch exception.
+
+- Version tags are set on virtual addresses from userspace even though
+  tags are stored in physical memory. Tags are set on a physical page
+  after it has been allocated to a task and a pte has been created for
+  it.
+
+- When a task frees a memory page it had set version tags on, the page
+  goes back to free page pool. When this page is re-allocated to a task,
+  kernel clears the page using block initialization ASI which clears the
+  version tags as well for the page. If a page allocated to a task is
+  freed and allocated back to the same task, old version tags set by the
+  task on that page will no longer be present.
+
+- ADI tag mismatches are not detected for non-faulting loads.
+
+- Kernel does not set any tags for user pages and it is entirely a
+  task's responsibility to set any version tags. Kernel does ensure the
+  version tags are preserved if a page is swapped out to the disk and
+  swapped back in. It also preserves that version tags if a page is
+  migrated.
+
+- ADI works for any size pages. A userspace task need not be aware of
+  page size when using ADI. It can simply select a virtual address
+  range, enable ADI on the range using mprotect() and set version tags
+  for the entire range. mprotect() ensures range is aligned to page size
+  and is a multiple of page size.
+
+- ADI tags can only be set on writable memory. For example, ADI tags can
+  not be set on read-only mappings.
+
+
+
+ADI related traps
+=================
+
+With ADI enabled, following new traps may occur:
+
+Disrupting memory corruption
+----------------------------
+
+	When a store accesses a memory localtion that has TTE.mcd=1,
+	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI
+	tag in the address used (bits 63:60) does not match the tag set on
+	the corresponding cacheline, a memory corruption trap occurs. By
+	default, it is a disrupting trap and is sent to the hypervisor
+	first. Hypervisor creates a sun4v error report and sends a
+	resumable error (TT=0x7e) trap to the kernel. The kernel sends
+	a SIGSEGV to the task that resulted in this trap with the following
+	info::
+
+		siginfo.si_signo = SIGSEGV;
+		siginfo.errno = 0;
+		siginfo.si_code = SEGV_ADIDERR;
+		siginfo.si_addr = addr; /* PC where first mismatch occurred */
+		siginfo.si_trapno = 0;
+
+
+Precise memory corruption
+-------------------------
+
+	When a store accesses a memory location that has TTE.mcd=1,
+	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI
+	tag in the address used (bits 63:60) does not match the tag set on
+	the corresponding cacheline, a memory corruption trap occurs. If
+	MCD precise exception is enabled (MCDPERR=1), a precise
+	exception is sent to the kernel with TT=0x1a. The kernel sends
+	a SIGSEGV to the task that resulted in this trap with the following
+	info::
+
+		siginfo.si_signo = SIGSEGV;
+		siginfo.errno = 0;
+		siginfo.si_code = SEGV_ADIPERR;
+		siginfo.si_addr = addr;	/* address that caused trap */
+		siginfo.si_trapno = 0;
+
+	NOTE:
+		ADI tag mismatch on a load always results in precise trap.
+
+
+MCD disabled
+------------
+
+	When a task has not enabled ADI and attempts to set ADI version
+	on a memory address, processor sends an MCD disabled trap. This
+	trap is handled by hypervisor first and the hypervisor vectors this
+	trap through to the kernel as Data Access Exception trap with
+	fault type set to 0xa (invalid ASI). When this occurs, the kernel
+	sends the task SIGSEGV signal with following info::
+
+		siginfo.si_signo = SIGSEGV;
+		siginfo.errno = 0;
+		siginfo.si_code = SEGV_ACCADI;
+		siginfo.si_addr = addr;	/* address that caused trap */
+		siginfo.si_trapno = 0;
+
+
+Sample program to use ADI
+-------------------------
+
+Following sample program is meant to illustrate how to use the ADI
+functionality::
+
+  #include <unistd.h>
+  #include <stdio.h>
+  #include <stdlib.h>
+  #include <elf.h>
+  #include <sys/ipc.h>
+  #include <sys/shm.h>
+  #include <sys/mman.h>
+  #include <asm/asi.h>
+
+  #ifndef AT_ADI_BLKSZ
+  #define AT_ADI_BLKSZ	48
+  #endif
+  #ifndef AT_ADI_NBITS
+  #define AT_ADI_NBITS	49
+  #endif
+
+  #ifndef PROT_ADI
+  #define PROT_ADI	0x10
+  #endif
+
+  #define BUFFER_SIZE     32*1024*1024UL
+
+  main(int argc, char* argv[], char* envp[])
+  {
+          unsigned long i, mcde, adi_blksz, adi_nbits;
+          char *shmaddr, *tmp_addr, *end, *veraddr, *clraddr;
+          int shmid, version;
+	Elf64_auxv_t *auxv;
+
+	adi_blksz = 0;
+
+	while(*envp++ != NULL);
+	for (auxv = (Elf64_auxv_t *)envp; auxv->a_type != AT_NULL; auxv++) {
+		switch (auxv->a_type) {
+		case AT_ADI_BLKSZ:
+			adi_blksz = auxv->a_un.a_val;
+			break;
+		case AT_ADI_NBITS:
+			adi_nbits = auxv->a_un.a_val;
+			break;
+		}
+	}
+	if (adi_blksz == 0) {
+		fprintf(stderr, "Oops! ADI is not supported\n");
+		exit(1);
+	}
+
+	printf("ADI capabilities:\n");
+	printf("\tBlock size = %ld\n", adi_blksz);
+	printf("\tNumber of bits = %ld\n", adi_nbits);
+
+          if ((shmid = shmget(2, BUFFER_SIZE,
+                                  IPC_CREAT | SHM_R | SHM_W)) < 0) {
+                  perror("shmget failed");
+                  exit(1);
+          }
+
+          shmaddr = shmat(shmid, NULL, 0);
+          if (shmaddr == (char *)-1) {
+                  perror("shm attach failed");
+                  shmctl(shmid, IPC_RMID, NULL);
+                  exit(1);
+          }
+
+	if (mprotect(shmaddr, BUFFER_SIZE, PROT_READ|PROT_WRITE|PROT_ADI)) {
+		perror("mprotect failed");
+		goto err_out;
+	}
+
+          /* Set the ADI version tag on the shm segment
+           */
+          version = 10;
+          tmp_addr = shmaddr;
+          end = shmaddr + BUFFER_SIZE;
+          while (tmp_addr < end) {
+                  asm volatile(
+                          "stxa %1, [%0]0x90\n\t"
+                          :
+                          : "r" (tmp_addr), "r" (version));
+                  tmp_addr += adi_blksz;
+          }
+	asm volatile("membar #Sync\n\t");
+
+          /* Create a versioned address from the normal address by placing
+	 * version tag in the upper adi_nbits bits
+           */
+          tmp_addr = (void *) ((unsigned long)shmaddr << adi_nbits);
+          tmp_addr = (void *) ((unsigned long)tmp_addr >> adi_nbits);
+          veraddr = (void *) (((unsigned long)version << (64-adi_nbits))
+                          | (unsigned long)tmp_addr);
+
+          printf("Starting the writes:\n");
+          for (i = 0; i < BUFFER_SIZE; i++) {
+                  veraddr[i] = (char)(i);
+                  if (!(i % (1024 * 1024)))
+                          printf(".");
+          }
+          printf("\n");
+
+          printf("Verifying data...");
+	fflush(stdout);
+          for (i = 0; i < BUFFER_SIZE; i++)
+                  if (veraddr[i] != (char)i)
+                          printf("\nIndex %lu mismatched\n", i);
+          printf("Done.\n");
+
+          /* Disable ADI and clean up
+           */
+	if (mprotect(shmaddr, BUFFER_SIZE, PROT_READ|PROT_WRITE)) {
+		perror("mprotect failed");
+		goto err_out;
+	}
+
+          if (shmdt((const void *)shmaddr) != 0)
+                  perror("Detach failure");
+          shmctl(shmid, IPC_RMID, NULL);
+
+          exit(0);
+
+  err_out:
+          if (shmdt((const void *)shmaddr) != 0)
+                  perror("Detach failure");
+          shmctl(shmid, IPC_RMID, NULL);
+          exit(1);
+  }