Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

7 files changed, 847 insertions, 0 deletions

diff --git a/Documentation/trace/rv/da_monitor_instrumentation.rst b/Documentation/trace/rv/da_monitor_instrumentation.rst
new file mode 100644
index 000000000..6c67c7b57
--- /dev/null
+++ b/Documentation/trace/rv/da_monitor_instrumentation.rst
@@ -0,0 +1,171 @@
+Deterministic Automata Instrumentation
+======================================
+
+The RV monitor file created by dot2k, with the name "$MODEL_NAME.c"
+includes a section dedicated to instrumentation.
+
+In the example of the wip.dot monitor created on [1], it will look like::
+
+  /*
+   * This is the instrumentation part of the monitor.
+   *
+   * This is the section where manual work is required. Here the kernel events
+   * are translated into model's event.
+   *
+   */
+  static void handle_preempt_disable(void *data, /* XXX: fill header */)
+  {
+	da_handle_event_wip(preempt_disable_wip);
+  }
+
+  static void handle_preempt_enable(void *data, /* XXX: fill header */)
+  {
+	da_handle_event_wip(preempt_enable_wip);
+  }
+
+  static void handle_sched_waking(void *data, /* XXX: fill header */)
+  {
+	da_handle_event_wip(sched_waking_wip);
+  }
+
+  static int enable_wip(void)
+  {
+	int retval;
+
+	retval = da_monitor_init_wip();
+	if (retval)
+		return retval;
+
+	rv_attach_trace_probe("wip", /* XXX: tracepoint */, handle_preempt_disable);
+	rv_attach_trace_probe("wip", /* XXX: tracepoint */, handle_preempt_enable);
+	rv_attach_trace_probe("wip", /* XXX: tracepoint */, handle_sched_waking);
+
+	return 0;
+  }
+
+The comment at the top of the section explains the general idea: the
+instrumentation section translates *kernel events* into the *model's
+event*.
+
+Tracing callback functions
+--------------------------
+
+The first three functions are the starting point of the callback *handler
+functions* for each of the three events from the wip model. The developer
+does not necessarily need to use them: they are just starting points.
+
+Using the example of::
+
+ void handle_preempt_disable(void *data, /* XXX: fill header */)
+ {
+        da_handle_event_wip(preempt_disable_wip);
+ }
+
+The preempt_disable event from the model connects directly to the
+preemptirq:preempt_disable. The preemptirq:preempt_disable event
+has the following signature, from include/trace/events/preemptirq.h::
+
+  TP_PROTO(unsigned long ip, unsigned long parent_ip)
+
+Hence, the handle_preempt_disable() function will look like::
+
+  void handle_preempt_disable(void *data, unsigned long ip, unsigned long parent_ip)
+
+In this case, the kernel event translates one to one with the automata
+event, and indeed, no other change is required for this function.
+
+The next handler function, handle_preempt_enable() has the same argument
+list from the handle_preempt_disable(). The difference is that the
+preempt_enable event will be used to synchronize the system to the model.
+
+Initially, the *model* is placed in the initial state. However, the *system*
+might or might not be in the initial state. The monitor cannot start
+processing events until it knows that the system has reached the initial state.
+Otherwise, the monitor and the system could be out-of-sync.
+
+Looking at the automata definition, it is possible to see that the system
+and the model are expected to return to the initial state after the
+preempt_enable execution. Hence, it can be used to synchronize the
+system and the model at the initialization of the monitoring section.
+
+The start is informed via a special handle function, the
+"da_handle_start_event_$(MONITOR_NAME)(event)", in this case::
+
+  da_handle_start_event_wip(preempt_enable_wip);
+
+So, the callback function will look like::
+
+  void handle_preempt_enable(void *data, unsigned long ip, unsigned long parent_ip)
+  {
+        da_handle_start_event_wip(preempt_enable_wip);
+  }
+
+Finally, the "handle_sched_waking()" will look like::
+
+  void handle_sched_waking(void *data, struct task_struct *task)
+  {
+        da_handle_event_wip(sched_waking_wip);
+  }
+
+And the explanation is left for the reader as an exercise.
+
+enable and disable functions
+----------------------------
+
+dot2k automatically creates two special functions::
+
+  enable_$(MONITOR_NAME)()
+  disable_$(MONITOR_NAME)()
+
+These functions are called when the monitor is enabled and disabled,
+respectively.
+
+They should be used to *attach* and *detach* the instrumentation to the running
+system. The developer must add to the relative function all that is needed to
+*attach* and *detach* its monitor to the system.
+
+For the wip case, these functions were named::
+
+ enable_wip()
+ disable_wip()
+
+But no change was required because: by default, these functions *attach* and
+*detach* the tracepoints_to_attach, which was enough for this case.
+
+Instrumentation helpers
+-----------------------
+
+To complete the instrumentation, the *handler functions* need to be attached to a
+kernel event, at the monitoring enable phase.
+
+The RV interface also facilitates this step. For example, the macro "rv_attach_trace_probe()"
+is used to connect the wip model events to the relative kernel event. dot2k automatically
+adds "rv_attach_trace_probe()" function call for each model event in the enable phase, as
+a suggestion.
+
+For example, from the wip sample model::
+
+  static int enable_wip(void)
+  {
+        int retval;
+
+        retval = da_monitor_init_wip();
+        if (retval)
+                return retval;
+
+        rv_attach_trace_probe("wip", /* XXX: tracepoint */, handle_preempt_enable);
+        rv_attach_trace_probe("wip", /* XXX: tracepoint */, handle_sched_waking);
+        rv_attach_trace_probe("wip", /* XXX: tracepoint */, handle_preempt_disable);
+
+        return 0;
+  }
+
+The probes then need to be detached at the disable phase.
+
+[1] The wip model is presented in::
+
+  Documentation/trace/rv/deterministic_automata.rst
+
+The wip monitor is presented in::
+
+  Documentation/trace/rv/da_monitor_synthesis.rst
diff --git a/Documentation/trace/rv/da_monitor_synthesis.rst b/Documentation/trace/rv/da_monitor_synthesis.rst
new file mode 100644
index 000000000..0dbdcd1e6
--- /dev/null
+++ b/Documentation/trace/rv/da_monitor_synthesis.rst
@@ -0,0 +1,147 @@
+Deterministic Automata Monitor Synthesis
+========================================
+
+The starting point for the application of runtime verification (RV) technics
+is the *specification* or *modeling* of the desired (or undesired) behavior
+of the system under scrutiny.
+
+The formal representation needs to be then *synthesized* into a *monitor*
+that can then be used in the analysis of the trace of the system. The
+*monitor* connects to the system via an *instrumentation* that converts
+the events from the *system* to the events of the *specification*.
+
+
+In Linux terms, the runtime verification monitors are encapsulated inside
+the *RV monitor* abstraction. The RV monitor includes a set of instances
+of the monitor (per-cpu monitor, per-task monitor, and so on), the helper
+functions that glue the monitor to the system reference model, and the
+trace output as a reaction to event parsing and exceptions, as depicted
+below::
+
+ Linux  +----- RV Monitor ----------------------------------+ Formal
+  Realm |                                                   |  Realm
+  +-------------------+     +----------------+     +-----------------+
+  |   Linux kernel    |     |     Monitor    |     |     Reference   |
+  |     Tracing       |  -> |   Instance(s)  | <-  |       Model     |
+  | (instrumentation) |     | (verification) |     | (specification) |
+  +-------------------+     +----------------+     +-----------------+
+         |                          |                       |
+         |                          V                       |
+         |                     +----------+                 |
+         |                     | Reaction |                 |
+         |                     +--+--+--+-+                 |
+         |                        |  |  |                   |
+         |                        |  |  +-> trace output ?  |
+         +------------------------|--|----------------------+
+                                  |  +----> panic ?
+                                  +-------> <user-specified>
+
+DA monitor synthesis
+--------------------
+
+The synthesis of automata-based models into the Linux *RV monitor* abstraction
+is automated by the dot2k tool and the rv/da_monitor.h header file that
+contains a set of macros that automatically generate the monitor's code.
+
+dot2k
+-----
+
+The dot2k utility leverages dot2c by converting an automaton model in
+the DOT format into the C representation [1] and creating the skeleton of
+a kernel monitor in C.
+
+For example, it is possible to transform the wip.dot model present in
+[1] into a per-cpu monitor with the following command::
+
+  $ dot2k -d wip.dot -t per_cpu
+
+This will create a directory named wip/ with the following files:
+
+- wip.h: the wip model in C
+- wip.c: the RV monitor
+
+The wip.c file contains the monitor declaration and the starting point for
+the system instrumentation.
+
+Monitor macros
+--------------
+
+The rv/da_monitor.h enables automatic code generation for the *Monitor
+Instance(s)* using C macros.
+
+The benefits of the usage of macro for monitor synthesis are 3-fold as it:
+
+- Reduces the code duplication;
+- Facilitates the bug fix/improvement;
+- Avoids the case of developers changing the core of the monitor code
+  to manipulate the model in a (let's say) non-standard way.
+
+This initial implementation presents three different types of monitor instances:
+
+- ``#define DECLARE_DA_MON_GLOBAL(name, type)``
+- ``#define DECLARE_DA_MON_PER_CPU(name, type)``
+- ``#define DECLARE_DA_MON_PER_TASK(name, type)``
+
+The first declares the functions for a global deterministic automata monitor,
+the second for monitors with per-cpu instances, and the third with per-task
+instances.
+
+In all cases, the 'name' argument is a string that identifies the monitor, and
+the 'type' argument is the data type used by dot2k on the representation of
+the model in C.
+
+For example, the wip model with two states and three events can be
+stored in an 'unsigned char' type. Considering that the preemption control
+is a per-cpu behavior, the monitor declaration in the 'wip.c' file is::
+
+  DECLARE_DA_MON_PER_CPU(wip, unsigned char);
+
+The monitor is executed by sending events to be processed via the functions
+presented below::
+
+  da_handle_event_$(MONITOR_NAME)($(event from event enum));
+  da_handle_start_event_$(MONITOR_NAME)($(event from event enum));
+  da_handle_start_run_event_$(MONITOR_NAME)($(event from event enum));
+
+The function ``da_handle_event_$(MONITOR_NAME)()`` is the regular case where
+the event will be processed if the monitor is processing events.
+
+When a monitor is enabled, it is placed in the initial state of the automata.
+However, the monitor does not know if the system is in the *initial state*.
+
+The ``da_handle_start_event_$(MONITOR_NAME)()`` function is used to notify the
+monitor that the system is returning to the initial state, so the monitor can
+start monitoring the next event.
+
+The ``da_handle_start_run_event_$(MONITOR_NAME)()`` function is used to notify
+the monitor that the system is known to be in the initial state, so the
+monitor can start monitoring and monitor the current event.
+
+Using the wip model as example, the events "preempt_disable" and
+"sched_waking" should be sent to monitor, respectively, via [2]::
+
+  da_handle_event_wip(preempt_disable_wip);
+  da_handle_event_wip(sched_waking_wip);
+
+While the event "preempt_enabled" will use::
+
+  da_handle_start_event_wip(preempt_enable_wip);
+
+To notify the monitor that the system will be returning to the initial state,
+so the system and the monitor should be in sync.
+
+Final remarks
+-------------
+
+With the monitor synthesis in place using the rv/da_monitor.h and
+dot2k, the developer's work should be limited to the instrumentation
+of the system, increasing the confidence in the overall approach.
+
+[1] For details about deterministic automata format and the translation
+from one representation to another, see::
+
+  Documentation/trace/rv/deterministic_automata.rst
+
+[2] dot2k appends the monitor's name suffix to the events enums to
+avoid conflicting variables when exporting the global vmlinux.h
+use by BPF programs.
diff --git a/Documentation/trace/rv/deterministic_automata.rst b/Documentation/trace/rv/deterministic_automata.rst
new file mode 100644
index 000000000..d0638f95a
--- /dev/null
+++ b/Documentation/trace/rv/deterministic_automata.rst
@@ -0,0 +1,184 @@
+Deterministic Automata
+======================
+
+Formally, a deterministic automaton, denoted by G, is defined as a quintuple:
+
+        *G* = { *X*, *E*, *f*, x\ :subscript:`0`, X\ :subscript:`m` }
+
+where:
+
+- *X* is the set of states;
+- *E* is the finite set of events;
+- x\ :subscript:`0` is the initial state;
+- X\ :subscript:`m` (subset of *X*) is the set of marked (or final) states.
+- *f* : *X* x *E* -> *X* $ is the transition function. It defines the state
+  transition in the occurrence of an event from *E* in the state *X*. In the
+  special case of deterministic automata, the occurrence of the event in *E*
+  in a state in *X* has a deterministic next state from *X*.
+
+For example, a given automaton named 'wip' (wakeup in preemptive) can
+be defined as:
+
+- *X* = { ``preemptive``, ``non_preemptive``}
+- *E* = { ``preempt_enable``, ``preempt_disable``, ``sched_waking``}
+- x\ :subscript:`0` = ``preemptive``
+- X\ :subscript:`m` = {``preemptive``}
+- *f* =
+   - *f*\ (``preemptive``, ``preempt_disable``) = ``non_preemptive``
+   - *f*\ (``non_preemptive``, ``sched_waking``) = ``non_preemptive``
+   - *f*\ (``non_preemptive``, ``preempt_enable``) = ``preemptive``
+
+One of the benefits of this formal definition is that it can be presented
+in multiple formats. For example, using a *graphical representation*, using
+vertices (nodes) and edges, which is very intuitive for *operating system*
+practitioners, without any loss.
+
+The previous 'wip' automaton can also be represented as::
+
+                       preempt_enable
+          +---------------------------------+
+          v                                 |
+        #============#  preempt_disable   +------------------+
+    --> H preemptive H -----------------> |  non_preemptive  |
+        #============#                    +------------------+
+                                            ^              |
+                                            | sched_waking |
+                                            +--------------+
+
+Deterministic Automaton in C
+----------------------------
+
+In the paper "Efficient formal verification for the Linux kernel",
+the authors present a simple way to represent an automaton in C that can
+be used as regular code in the Linux kernel.
+
+For example, the 'wip' automata can be presented as (augmented with comments)::
+
+  /* enum representation of X (set of states) to be used as index */
+  enum states {
+	preemptive = 0,
+	non_preemptive,
+	state_max
+  };
+
+  #define INVALID_STATE state_max
+
+  /* enum representation of E (set of events) to be used as index */
+  enum events {
+	preempt_disable = 0,
+	preempt_enable,
+	sched_waking,
+	event_max
+  };
+
+  struct automaton {
+	char *state_names[state_max];                   // X: the set of states
+	char *event_names[event_max];                   // E: the finite set of events
+	unsigned char function[state_max][event_max];   // f: transition function
+	unsigned char initial_state;                    // x_0: the initial state
+	bool final_states[state_max];                   // X_m: the set of marked states
+  };
+
+  struct automaton aut = {
+	.state_names = {
+		"preemptive",
+		"non_preemptive"
+	},
+	.event_names = {
+		"preempt_disable",
+		"preempt_enable",
+		"sched_waking"
+	},
+	.function = {
+		{ non_preemptive,  INVALID_STATE,  INVALID_STATE },
+		{  INVALID_STATE,     preemptive, non_preemptive },
+	},
+	.initial_state = preemptive,
+	.final_states = { 1, 0 },
+  };
+
+The *transition function* is represented as a matrix of states (lines) and
+events (columns), and so the function *f* : *X* x *E* -> *X* can be solved
+in O(1). For example::
+
+  next_state = automaton_wip.function[curr_state][event];
+
+Graphviz .dot format
+--------------------
+
+The Graphviz open-source tool can produce the graphical representation
+of an automaton using the (textual) DOT language as the source code.
+The DOT format is widely used and can be converted to many other formats.
+
+For example, this is the 'wip' model in DOT::
+
+  digraph state_automaton {
+        {node [shape = circle] "non_preemptive"};
+        {node [shape = plaintext, style=invis, label=""] "__init_preemptive"};
+        {node [shape = doublecircle] "preemptive"};
+        {node [shape = circle] "preemptive"};
+        "__init_preemptive" -> "preemptive";
+        "non_preemptive" [label = "non_preemptive"];
+        "non_preemptive" -> "non_preemptive" [ label = "sched_waking" ];
+        "non_preemptive" -> "preemptive" [ label = "preempt_enable" ];
+        "preemptive" [label = "preemptive"];
+        "preemptive" -> "non_preemptive" [ label = "preempt_disable" ];
+        { rank = min ;
+                "__init_preemptive";
+                "preemptive";
+        }
+  }
+
+This DOT format can be transformed into a bitmap or vectorial image
+using the dot utility, or into an ASCII art using graph-easy. For
+instance::
+
+  $ dot -Tsvg -o wip.svg wip.dot
+  $ graph-easy wip.dot > wip.txt
+
+dot2c
+-----
+
+dot2c is a utility that can parse a .dot file containing an automaton as
+in the example above and automatically convert it to the C representation
+presented in [3].
+
+For example, having the previous 'wip' model into a file named 'wip.dot',
+the following command will transform the .dot file into the C
+representation (previously shown) in the 'wip.h' file::
+
+  $ dot2c wip.dot > wip.h
+
+The 'wip.h' content is the code sample in section 'Deterministic Automaton
+in C'.
+
+Remarks
+-------
+
+The automata formalism allows modeling discrete event systems (DES) in
+multiple formats, suitable for different applications/users.
+
+For example, the formal description using set theory is better suitable
+for automata operations, while the graphical format for human interpretation;
+and computer languages for machine execution.
+
+References
+----------
+
+Many textbooks cover automata formalism. For a brief introduction see::
+
+  O'Regan, Gerard. Concise guide to software engineering. Springer,
+  Cham, 2017.
+
+For a detailed description, including operations, and application on Discrete
+Event Systems (DES), see::
+
+  Cassandras, Christos G., and Stephane Lafortune, eds. Introduction to discrete
+  event systems. Boston, MA: Springer US, 2008.
+
+For the C representation in kernel, see::
+
+  De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo
+  Silva. Efficient formal verification for the Linux kernel. In:
+  International Conference on Software Engineering and Formal Methods.
+  Springer, Cham, 2019. p. 315-332.
diff --git a/Documentation/trace/rv/index.rst b/Documentation/trace/rv/index.rst
new file mode 100644
index 000000000..15fa96610
--- /dev/null
+++ b/Documentation/trace/rv/index.rst
@@ -0,0 +1,14 @@
+====================
+Runtime Verification
+====================
+
+.. toctree::
+   :maxdepth: 2
+   :glob:
+
+   runtime-verification.rst
+   deterministic_automata.rst
+   da_monitor_synthesis.rst
+   da_monitor_instrumentation.rst
+   monitor_wip.rst
+   monitor_wwnr.rst
diff --git a/Documentation/trace/rv/monitor_wip.rst b/Documentation/trace/rv/monitor_wip.rst
new file mode 100644
index 000000000..a95763438
--- /dev/null
+++ b/Documentation/trace/rv/monitor_wip.rst
@@ -0,0 +1,55 @@
+Monitor wip
+===========
+
+- Name: wip - wakeup in preemptive
+- Type: per-cpu deterministic automaton
+- Author: Daniel Bristot de Oliveira <bristot@kernel.org>
+
+Description
+-----------
+
+The wakeup in preemptive (wip) monitor is a sample per-cpu monitor
+that verifies if the wakeup events always take place with
+preemption disabled::
+
+                     |
+                     |
+                     v
+                   #==================#
+                   H    preemptive    H <+
+                   #==================#  |
+                     |                   |
+                     | preempt_disable   | preempt_enable
+                     v                   |
+    sched_waking   +------------------+  |
+  +--------------- |                  |  |
+  |                |  non_preemptive  |  |
+  +--------------> |                  | -+
+                   +------------------+
+
+The wakeup event always takes place with preemption disabled because
+of the scheduler synchronization. However, because the preempt_count
+and its trace event are not atomic with regard to interrupts, some
+inconsistencies might happen. For example::
+
+  preempt_disable() {
+	__preempt_count_add(1)
+	------->	smp_apic_timer_interrupt() {
+				preempt_disable()
+					do not trace (preempt count >= 1)
+
+				wake up a thread
+
+				preempt_enable()
+					 do not trace (preempt count >= 1)
+			}
+	<------
+	trace_preempt_disable();
+  }
+
+This problem was reported and discussed here:
+  https://lore.kernel.org/r/cover.1559051152.git.bristot@redhat.com/
+
+Specification
+-------------
+Grapviz Dot file in tools/verification/models/wip.dot
diff --git a/Documentation/trace/rv/monitor_wwnr.rst b/Documentation/trace/rv/monitor_wwnr.rst
new file mode 100644
index 000000000..80f1777b8
--- /dev/null
+++ b/Documentation/trace/rv/monitor_wwnr.rst
@@ -0,0 +1,45 @@
+Monitor wwnr
+============
+
+- Name: wwrn - wakeup while not running
+- Type: per-task deterministic automaton
+- Author: Daniel Bristot de Oliveira <bristot@kernel.org>
+
+Description
+-----------
+
+This is a per-task sample monitor, with the following
+definition::
+
+               |
+               |
+               v
+    wakeup   +-------------+
+  +--------- |             |
+  |          | not_running |
+  +--------> |             | <+
+             +-------------+  |
+               |              |
+               | switch_in    | switch_out
+               v              |
+             +-------------+  |
+             |   running   | -+
+             +-------------+
+
+This model is borken, the reason is that a task can be running
+in the processor without being set as RUNNABLE. Think about a
+task about to sleep::
+
+  1:      set_current_state(TASK_UNINTERRUPTIBLE);
+  2:      schedule();
+
+And then imagine an IRQ happening in between the lines one and two,
+waking the task up. BOOM, the wakeup will happen while the task is
+running.
+
+- Why do we need this model, so?
+- To test the reactors.
+
+Specification
+-------------
+Grapviz Dot file in tools/verification/models/wwnr.dot
diff --git a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
new file mode 100644
index 000000000..c46b61494
--- /dev/null
+++ b/Documentation/trace/rv/runtime-verification.rst
@@ -0,0 +1,231 @@
+====================
+Runtime Verification
+====================
+
+Runtime Verification (RV) is a lightweight (yet rigorous) method that
+complements classical exhaustive verification techniques (such as *model
+checking* and *theorem proving*) with a more practical approach for complex
+systems.
+
+Instead of relying on a fine-grained model of a system (e.g., a
+re-implementation a instruction level), RV works by analyzing the trace of the
+system's actual execution, comparing it against a formal specification of
+the system behavior.
+
+The main advantage is that RV can give precise information on the runtime
+behavior of the monitored system, without the pitfalls of developing models
+that require a re-implementation of the entire system in a modeling language.
+Moreover, given an efficient monitoring method, it is possible execute an
+*online* verification of a system, enabling the *reaction* for unexpected
+events, avoiding, for example, the propagation of a failure on safety-critical
+systems.
+
+Runtime Monitors and Reactors
+=============================
+
+A monitor is the central part of the runtime verification of a system. The
+monitor stands in between the formal specification of the desired (or
+undesired) behavior, and the trace of the actual system.
+
+In Linux terms, the runtime verification monitors are encapsulated inside the
+*RV monitor* abstraction. A *RV monitor* includes a reference model of the
+system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
+and so on), and the helper functions that glue the monitor to the system via
+trace, as depicted bellow::
+
+ Linux   +---- RV Monitor ----------------------------------+ Formal
+  Realm  |                                                  |  Realm
+  +-------------------+     +----------------+     +-----------------+
+  |   Linux kernel    |     |     Monitor    |     |     Reference   |
+  |     Tracing       |  -> |   Instance(s)  | <-  |       Model     |
+  | (instrumentation) |     | (verification) |     | (specification) |
+  +-------------------+     +----------------+     +-----------------+
+         |                          |                       |
+         |                          V                       |
+         |                     +----------+                 |
+         |                     | Reaction |                 |
+         |                     +--+--+--+-+                 |
+         |                        |  |  |                   |
+         |                        |  |  +-> trace output ?  |
+         +------------------------|--|----------------------+
+                                  |  +----> panic ?
+                                  +-------> <user-specified>
+
+In addition to the verification and monitoring of the system, a monitor can
+react to an unexpected event. The forms of reaction can vary from logging the
+event occurrence to the enforcement of the correct behavior to the extreme
+action of taking a system down to avoid the propagation of a failure.
+
+In Linux terms, a *reactor* is an reaction method available for *RV monitors*.
+By default, all monitors should provide a trace output of their actions,
+which is already a reaction. In addition, other reactions will be available
+so the user can enable them as needed.
+
+For further information about the principles of runtime verification and
+RV applied to Linux:
+
+  Bartocci, Ezio, et al. *Introduction to runtime verification.* In: Lectures on
+  Runtime Verification. Springer, Cham, 2018. p. 1-33.
+
+  Falcone, Ylies, et al. *A taxonomy for classifying runtime verification tools.*
+  In: International Conference on Runtime Verification. Springer, Cham, 2018. p.
+  241-262.
+
+  De Oliveira, Daniel Bristot. *Automata-based formal analysis and
+  verification of the real-time Linux kernel.* Ph.D. Thesis, 2020.
+
+Online RV monitors
+==================
+
+Monitors can be classified as *offline* and *online* monitors. *Offline*
+monitor process the traces generated by a system after the events, generally by
+reading the trace execution from a permanent storage system. *Online* monitors
+process the trace during the execution of the system. Online monitors are said
+to be *synchronous* if the processing of an event is attached to the system
+execution, blocking the system during the event monitoring. On the other hand,
+an *asynchronous* monitor has its execution detached from the system. Each type
+of monitor has a set of advantages. For example, *offline* monitors can be
+executed on different machines but require operations to save the log to a
+file. In contrast, *synchronous online* method can react at the exact moment
+a violation occurs.
+
+Another important aspect regarding monitors is the overhead associated with the
+event analysis. If the system generates events at a frequency higher than the
+monitor's ability to process them in the same system, only the *offline*
+methods are viable. On the other hand, if the tracing of the events incurs
+on higher overhead than the simple handling of an event by a monitor, then a
+*synchronous online* monitors will incur on lower overhead.
+
+Indeed, the research presented in:
+
+  De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo Silva.
+  *Efficient formal verification for the Linux kernel.* In: International
+  Conference on Software Engineering and Formal Methods. Springer, Cham, 2019.
+  p. 315-332.
+
+Shows that for Deterministic Automata models, the synchronous processing of
+events in-kernel causes lower overhead than saving the same events to the trace
+buffer, not even considering collecting the trace for user-space analysis.
+This motivated the development of an in-kernel interface for online monitors.
+
+For further information about modeling of Linux kernel behavior using automata,
+see:
+
+  De Oliveira, Daniel B.; De Oliveira, Romulo S.; Cucinotta, Tommaso. *A thread
+  synchronization model for the PREEMPT_RT Linux kernel.* Journal of Systems
+  Architecture, 2020, 107: 101729.
+
+The user interface
+==================
+
+The user interface resembles the tracing interface (on purpose). It is
+currently at "/sys/kernel/tracing/rv/".
+
+The following files/folders are currently available:
+
+**available_monitors**
+
+- Reading list the available monitors, one per line
+
+For example::
+
+   # cat available_monitors
+   wip
+   wwnr
+
+**available_reactors**
+
+- Reading shows the available reactors, one per line.
+
+For example::
+
+   # cat available_reactors
+   nop
+   panic
+   printk
+
+**enabled_monitors**:
+
+- Reading lists the enabled monitors, one per line
+- Writing to it enables a given monitor
+- Writing a monitor name with a '!' prefix disables it
+- Truncating the file disables all enabled monitors
+
+For example::
+
+   # cat enabled_monitors
+   # echo wip > enabled_monitors
+   # echo wwnr >> enabled_monitors
+   # cat enabled_monitors
+   wip
+   wwnr
+   # echo '!wip' >> enabled_monitors
+   # cat enabled_monitors
+   wwnr
+   # echo > enabled_monitors
+   # cat enabled_monitors
+   #
+
+Note that it is possible to enable more than one monitor concurrently.
+
+**monitoring_on**
+
+This is an on/off general switcher for monitoring. It resembles the
+"tracing_on" switcher in the trace interface.
+
+- Writing "0" stops the monitoring
+- Writing "1" continues the monitoring
+- Reading returns the current status of the monitoring
+
+Note that it does not disable enabled monitors but stop the per-entity
+monitors monitoring the events received from the system.
+
+**reacting_on**
+
+- Writing "0" prevents reactions for happening
+- Writing "1" enable reactions
+- Reading returns the current status of the reaction
+
+**monitors/**
+
+Each monitor will have its own directory inside "monitors/". There the
+monitor-specific files will be presented. The "monitors/" directory resembles
+the "events" directory on tracefs.
+
+For example::
+
+   # cd monitors/wip/
+   # ls
+   desc  enable
+   # cat desc
+   wakeup in preemptive per-cpu testing monitor.
+   # cat enable
+   0
+
+**monitors/MONITOR/desc**
+
+- Reading shows a description of the monitor *MONITOR*
+
+**monitors/MONITOR/enable**
+
+- Writing "0" disables the *MONITOR*
+- Writing "1" enables the *MONITOR*
+- Reading return the current status of the *MONITOR*
+
+**monitors/MONITOR/reactors**
+
+- List available reactors, with the select reaction for the given *MONITOR*
+  inside "[]". The default one is the nop (no operation) reactor.
+- Writing the name of a reactor enables it to the given MONITOR.
+
+For example::
+
+   # cat monitors/wip/reactors
+   [nop]
+   panic
+   printk
+   # echo panic > monitors/wip/reactors
+   # cat monitors/wip/reactors
+   nop
+   [panic]
+   printk