Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 111 insertions, 0 deletions

diff --git a/Documentation/translations/zh_CN/core-api/printk-basics.rst b/Documentation/translations/zh_CN/core-api/printk-basics.rst
new file mode 100644
index 000000000..59c6efb3f
--- /dev/null
+++ b/Documentation/translations/zh_CN/core-api/printk-basics.rst
@@ -0,0 +1,111 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/core-api/printk-basics.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+ 周彬彬 Binbin Zhou <zhoubinbin@loongson.cn>
+
+.. _cn_printk-basics.rst:
+
+==================
+使用printk记录消息
+==================
+
+printk()是Linux内核中最广为人知的函数之一。它是我们打印消息的标准工具，通常也是追踪和调试
+的最基本方法。如果你熟悉printf(3)，你就能够知道printk()是基于它的，尽管它在功能上有一些不
+同之处:
+
+  - printk() 消息可以指定日志级别。
+
+  - 格式字符串虽然与C99基本兼容，但并不遵循完全相同的规范。它有一些扩展和一些限制（没
+    有 ``%n`` 或浮点转换指定符）。参见:ref: `如何正确地获得printk格式指定符<printk-specifiers>` 。
+
+所有的printk()消息都会被打印到内核日志缓冲区，这是一个通过/dev/kmsg输出到用户空间的环
+形缓冲区。读取它的通常方法是使用 ``dmesg`` 。
+
+printk()的用法通常是这样的::
+
+  printk(KERN_INFO "Message: %s\n", arg);
+
+其中 ``KERN_INFO`` 是日志级别（注意，它与格式字符串连在一起，日志级别不是一个单独的参数）。
+可用的日志级别是：
+
+
++----------------+--------+-----------------------------------------------+
+| 名称           | 字符串 |  别名函数                                     |
++================+========+===============================================+
+| KERN_EMERG     | "0"    | pr_emerg()                                    |
++----------------+--------+-----------------------------------------------+
+| KERN_ALERT     | "1"    | pr_alert()                                    |
++----------------+--------+-----------------------------------------------+
+| KERN_CRIT      | "2"    | pr_crit()                                     |
++----------------+--------+-----------------------------------------------+
+| KERN_ERR       | "3"    | pr_err()                                      |
++----------------+--------+-----------------------------------------------+
+| KERN_WARNING   | "4"    | pr_warn()                                     |
++----------------+--------+-----------------------------------------------+
+| KERN_NOTICE    | "5"    | pr_notice()                                   |
++----------------+--------+-----------------------------------------------+
+| KERN_INFO      | "6"    | pr_info()                                     |
++----------------+--------+-----------------------------------------------+
+| KERN_DEBUG     | "7"    | pr_debug() and pr_devel()  若定义了DEBUG      |
++----------------+--------+-----------------------------------------------+
+| KERN_DEFAULT   | ""     |                                               |
++----------------+--------+-----------------------------------------------+
+| KERN_CONT      | "c"    | pr_cont()                                     |
++----------------+--------+-----------------------------------------------+
+
+
+日志级别指定了一条消息的重要性。内核根据日志级别和当前 *console_loglevel* （一个内核变量）决
+定是否立即显示消息（将其打印到当前控制台）。如果消息的优先级比 *console_loglevel* 高（日志级
+别值较低），消息将被打印到控制台。
+
+如果省略了日志级别，则以 ``KERN_DEFAULT`` 级别打印消息。
+
+你可以用以下方法检查当前的 *console_loglevel* ::
+
+  $ cat /proc/sys/kernel/printk
+  4        4        1        7
+
+结果显示了 *current*, *default*, *minimum* 和 *boot-time-default* 日志级别
+
+要改变当前的 console_loglevel，只需在 ``/proc/sys/kernel/printk`` 中写入所需的
+级别。例如，要打印所有的消息到控制台上::
+
+  # echo 8 > /proc/sys/kernel/printk
+
+另一种方式，使用 ``dmesg``::
+
+  # dmesg -n 5
+
+设置 console_loglevel 打印 KERN_WARNING (4) 或更严重的消息到控制台。更多消息参
+见 ``dmesg(1)`` 。
+
+作为printk()的替代方案，你可以使用 ``pr_*()`` 别名来记录日志。这个系列的宏在宏名中
+嵌入了日志级别。例如::
+
+  pr_info("Info message no. %d\n", msg_num);
+
+打印 ``KERN_INFO`` 消息。
+
+除了比等效的printk()调用更简洁之外，它们还可以通过pr_fmt()宏为格式字符串使用一个通用
+的定义。例如，在源文件的顶部（在任何  ``#include`` 指令之前）定义这样的内容。::
+
+  #define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__
+
+会在该文件中的每一条 pr_*() 消息前加上发起该消息的模块和函数名称。
+
+为了调试，还有两个有条件编译的宏：
+pr_debug()和pr_devel()，除非定义了 ``DEBUG`` (或者在pr_debug()的情况下定义了
+``CONFIG_DYNAMIC_DEBUG`` )，否则它们会被编译。
+
+
+函数接口
+========
+
+该API在以下内核代码中:
+
+include/linux/printk.h