Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 110 insertions, 0 deletions

diff --git a/Documentation/translations/zh_CN/dev-tools/sparse.rst b/Documentation/translations/zh_CN/dev-tools/sparse.rst
new file mode 100644
index 000000000..0664c634b
--- /dev/null
+++ b/Documentation/translations/zh_CN/dev-tools/sparse.rst
@@ -0,0 +1,110 @@
+Copyright 2004 Linus Torvalds
+Copyright 2004 Pavel Machek <pavel@ucw.cz>
+Copyright 2006 Bob Copeland <me@bobcopeland.com>
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/dev-tools/sparse.rst
+
+:翻译:
+
+ Li Yang <leoyang.li@nxp.com>
+
+:校译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+
+.. _cn_sparse:
+
+Sparse
+======
+
+Sparse是一个C程序的语义检查器；它可以用来发现内核代码的一些潜在问题。 关
+于sparse的概述，请参见https://lwn.net/Articles/689907/；本文档包含
+一些针对内核的sparse信息。
+关于sparse的更多信息，主要是关于它的内部结构，可以在它的官方网页上找到：
+https://sparse.docs.kernel.org。
+
+使用 sparse 工具做类型检查
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+"__bitwise" 是一种类型属性，所以你应该这样使用它::
+
+        typedef int __bitwise pm_request_t;
+
+        enum pm_request {
+                PM_SUSPEND = (__force pm_request_t) 1,
+                PM_RESUME = (__force pm_request_t) 2
+        };
+
+这样会使 PM_SUSPEND 和 PM_RESUME 成为位方式(bitwise)整数（使用"__force"
+是因为 sparse 会抱怨改变位方式的类型转换，但是这里我们确实需要强制进行转
+换）。而且因为所有枚举值都使用了相同的类型，这里的"enum pm_request"也将
+会使用那个类型做为底层实现。
+
+而且使用 gcc 编译的时候，所有的 __bitwise/__force 都会消失，最后在 gcc
+看来它们只不过是普通的整数。
+
+坦白来说，你并不需要使用枚举类型。上面那些实际都可以浓缩成一个特殊的"int
+__bitwise"类型。
+
+所以更简单的办法只要这样做::
+
+	typedef int __bitwise pm_request_t;
+
+	#define PM_SUSPEND ((__force pm_request_t) 1)
+	#define PM_RESUME ((__force pm_request_t) 2)
+
+现在你就有了严格的类型检查所需要的所有基础架构。
+
+一个小提醒：常数整数"0"是特殊的。你可以直接把常数零当作位方式整数使用而
+不用担心 sparse 会抱怨。这是因为"bitwise"（恰如其名）是用来确保不同位方
+式类型不会被弄混（小尾模式，大尾模式，cpu尾模式，或者其他），对他们来说
+常数"0"确实 **是** 特殊的。
+
+使用sparse进行锁检查
+--------------------
+
+下面的宏对于 gcc 来说是未定义的，在 sparse 运行时定义，以使用sparse的“上下文”
+跟踪功能，应用于锁定。 这些注释告诉 sparse 什么时候有锁，以及注释的函数的进入和
+退出。
+
+__must_hold - 指定的锁在函数进入和退出时被持有。
+
+__acquires  - 指定的锁在函数退出时被持有，但在进入时不被持有。
+
+__releases  - 指定的锁在函数进入时被持有，但在退出时不被持有。
+
+如果函数在不持有锁的情况下进入和退出，在函数内部以平衡的方式获取和释放锁，则不
+需要注释。
+上面的三个注释是针对sparse否则会报告上下文不平衡的情况。
+
+获取 sparse 工具
+~~~~~~~~~~~~~~~~
+
+你可以从 Sparse 的主页获取最新的发布版本：
+
+	https://www.kernel.org/pub/software/devel/sparse/dist/
+
+或者，你也可以使用 git 克隆最新的 sparse 开发版本：
+
+	git://git.kernel.org/pub/scm/devel/sparse/sparse.git
+
+一旦你下载了源码，只要以普通用户身份运行：
+
+	make
+	make install
+
+如果是标准的用户，它将会被自动安装到你的~/bin目录下。
+
+使用 sparse 工具
+~~~~~~~~~~~~~~~~
+
+用"make C=1"命令来编译内核，会对所有重新编译的 C 文件使用 sparse 工具。
+或者使用"make C=2"命令，无论文件是否被重新编译都会对其使用 sparse 工具。
+如果你已经编译了内核，用后一种方式可以很快地检查整个源码树。
+
+make 的可选变量 CHECKFLAGS 可以用来向 sparse 工具传递参数。编译系统会自
+动向 sparse 工具传递 -Wbitwise 参数。
+
+注意sparse定义了__CHECKER__预处理器符号。
\ No newline at end of file