Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

4 files changed, 148 insertions, 0 deletions

diff --git a/Documentation/translations/zh_CN/mips/booting.rst b/Documentation/translations/zh_CN/mips/booting.rst
new file mode 100644
index 000000000..e0bbd3f20
--- /dev/null
+++ b/Documentation/translations/zh_CN/mips/booting.rst
@@ -0,0 +1,34 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/mips/booting.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+
+.. _cn_booting:
+
+BMIPS设备树引导
+------------------------
+
+  一些bootloaders只支持在内核镜像开始地址处的单一入口点。而其它
+  bootloaders将跳转到ELF的开始地址处。两种方案都支持的；因为
+  CONFIG_BOOT_RAW=y and CONFIG_NO_EXCEPT_FILL=y, 所以第一条指令
+  会立即跳转到kernel_entry()入口处执行。
+
+  与arch/arm情况(b)类似，dt感知的引导加载程序需要设置以下寄存器:
+
+         a0 : 0
+
+         a1 : 0xffffffff
+
+         a2 : RAM中指向设备树块的物理指针(在chapterII中定义)。
+              设备树可以位于前512MB物理地址空间(0x00000000 -
+              0x1fffffff)的任何位置，以64位边界对齐。
+
+  传统bootloaders不会使用这样的约定，并且它们不传入DT块。
+  在这种情况下，Linux将通过选中CONFIG_DT_*查找DTB。
+
+  以上约定只在32位系统中定义，因为目前没有任何64位的BMIPS实现。
diff --git a/Documentation/translations/zh_CN/mips/features.rst b/Documentation/translations/zh_CN/mips/features.rst
new file mode 100644
index 000000000..b61dab06c
--- /dev/null
+++ b/Documentation/translations/zh_CN/mips/features.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/mips/features.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+
+.. _cn_features:
+
+.. kernel-feat:: $srctree/Documentation/features mips
diff --git a/Documentation/translations/zh_CN/mips/index.rst b/Documentation/translations/zh_CN/mips/index.rst
new file mode 100644
index 000000000..192c6adbb
--- /dev/null
+++ b/Documentation/translations/zh_CN/mips/index.rst
@@ -0,0 +1,29 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/mips/index.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+
+===========================
+MIPS特性文档
+===========================
+
+.. toctree::
+   :maxdepth: 2
+   :numbered:
+
+   booting
+   ingenic-tcu
+
+   features
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/translations/zh_CN/mips/ingenic-tcu.rst b/Documentation/translations/zh_CN/mips/ingenic-tcu.rst
new file mode 100644
index 000000000..ddbe149c5
--- /dev/null
+++ b/Documentation/translations/zh_CN/mips/ingenic-tcu.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_CN.rst
+
+:Original: Documentation/mips/ingenic-tcu.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
+
+.. _cn_ingenic-tcu:
+
+===============================================
+君正 JZ47xx SoC定时器/计数器硬件单元
+===============================================
+
+君正 JZ47xx SoC中的定时器/计数器单元(TCU)是一个多功能硬件块。它有多达
+8个通道，可以用作计数器，计时器，或脉冲宽度调制器。
+
+- JZ4725B, JZ4750, JZ4755 只有６个TCU通道。其它SoC都有８个通道。
+
+- JZ4725B引入了一个独立的通道，称为操作系统计时器(OST)。这是一个32位可
+  编程定时器。在JZ4760B及以上型号上，它是64位的。
+
+- 每个TCU通道都有自己的时钟源，可以通过 TCSR 寄存器设置通道的父级时钟
+  源（pclk、ext、rtc）、开关以及分频。
+
+    - 看门狗和OST硬件模块在它们的寄存器空间中也有相同形式的TCSR寄存器。
+    - 用于关闭/开启的 TCU 寄存器也可以关闭/开启看门狗和 OST 时钟。
+
+- 每个TCU通道在两种模式的其中一种模式下运行：
+
+    - 模式 TCU1：通道无法在睡眠模式下运行，但更易于操作。
+    - 模式 TCU2：通道可以在睡眠模式下运行，但操作比 TCU1 通道复杂一些。
+
+- 每个 TCU 通道的模式取决于使用的SoC：
+
+    - 在最老的SoC（高于JZ4740），八个通道都运行在TCU1模式。
+    - 在 JZ4725B，通道5运行在TCU2,其它通道则运行在TCU1。
+    - 在最新的SoC（JZ4750及之后），通道1-2运行在TCU2，其它通道则运行
+      在TCU1。
+
+- 每个通道都可以生成中断。有些通道共享一条中断线，而有些没有，其在SoC型
+  号之间的变更：
+
+    - 在很老的SoC（JZ4740及更低），通道0和通道1有它们自己的中断线；通
+      道2-7共享最后一条中断线。
+    - 在 JZ4725B，通道0有它自己的中断线；通道1-5共享一条中断线；OST
+      使用最后一条中断线。
+    - 在比较新的SoC（JZ4750及以后），通道5有它自己的中断线；通
+      道0-4和（如果是8通道）6-7全部共享一条中断线；OST使用最后一条中
+      断线。
+
+实现
+====
+
+TCU硬件的功能分布在多个驱动程序：
+
+==============      ===================================
+时钟                drivers/clk/ingenic/tcu.c
+中断                drivers/irqchip/irq-ingenic-tcu.c
+定时器              drivers/clocksource/ingenic-timer.c
+OST                 drivers/clocksource/ingenic-ost.c
+脉冲宽度调制器      drivers/pwm/pwm-jz4740.c
+看门狗              drivers/watchdog/jz4740_wdt.c
+==============      ===================================
+
+因为可以从相同的寄存器控制属于不同驱动程序和框架的TCU的各种功能，所以
+所有这些驱动程序都通过相同的控制总线通用接口访问它们的寄存器。
+
+有关TCU驱动程序的设备树绑定的更多信息，请参阅:
+Documentation/devicetree/bindings/timer/ingenic,tcu.yaml.