Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 162 insertions, 0 deletions

diff --git a/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
new file mode 100644
index 000000000..982e8bcd9
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-expbuf.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: V4L
+
+.. _VIDIOC_EXPBUF:
+
+*******************
+ioctl VIDIOC_EXPBUF
+*******************
+
+Name
+====
+
+VIDIOC_EXPBUF - Export a buffer as a DMABUF file descriptor.
+
+Synopsis
+========
+
+.. c:macro:: VIDIOC_EXPBUF
+
+``int ioctl(int fd, VIDIOC_EXPBUF, struct v4l2_exportbuffer *argp)``
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open()`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_exportbuffer`.
+
+Description
+===========
+
+This ioctl is an extension to the :ref:`memory mapping <mmap>` I/O
+method, therefore it is available only for ``V4L2_MEMORY_MMAP`` buffers.
+It can be used to export a buffer as a DMABUF file at any time after
+buffers have been allocated with the
+:ref:`VIDIOC_REQBUFS` ioctl.
+
+To export a buffer, applications fill struct
+:c:type:`v4l2_exportbuffer`. The ``type`` field is
+set to the same buffer type as was previously used with struct
+:c:type:`v4l2_requestbuffers` ``type``.
+Applications must also set the ``index`` field. Valid index numbers
+range from zero to the number of buffers allocated with
+:ref:`VIDIOC_REQBUFS` (struct
+:c:type:`v4l2_requestbuffers` ``count``) minus
+one. For the multi-planar API, applications set the ``plane`` field to
+the index of the plane to be exported. Valid planes range from zero to
+the maximal number of valid planes for the currently active format. For
+the single-planar API, applications must set ``plane`` to zero.
+Additional flags may be posted in the ``flags`` field. Refer to a manual
+for open() for details. Currently only O_CLOEXEC, O_RDONLY, O_WRONLY,
+and O_RDWR are supported. All other fields must be set to zero. In the
+case of multi-planar API, every plane is exported separately using
+multiple :ref:`VIDIOC_EXPBUF` calls.
+
+After calling :ref:`VIDIOC_EXPBUF` the ``fd`` field will be set by a
+driver. This is a DMABUF file descriptor. The application may pass it to
+other DMABUF-aware devices. Refer to :ref:`DMABUF importing <dmabuf>`
+for details about importing DMABUF files into V4L2 nodes. It is
+recommended to close a DMABUF file when it is no longer used to allow
+the associated memory to be reclaimed.
+
+Examples
+========
+
+.. code-block:: c
+
+    int buffer_export(int v4lfd, enum v4l2_buf_type bt, int index, int *dmafd)
+    {
+	struct v4l2_exportbuffer expbuf;
+
+	memset(&expbuf, 0, sizeof(expbuf));
+	expbuf.type = bt;
+	expbuf.index = index;
+	if (ioctl(v4lfd, VIDIOC_EXPBUF, &expbuf) == -1) {
+	    perror("VIDIOC_EXPBUF");
+	    return -1;
+	}
+
+	*dmafd = expbuf.fd;
+
+	return 0;
+    }
+
+.. code-block:: c
+
+    int buffer_export_mp(int v4lfd, enum v4l2_buf_type bt, int index,
+	int dmafd[], int n_planes)
+    {
+	int i;
+
+	for (i = 0; i < n_planes; ++i) {
+	    struct v4l2_exportbuffer expbuf;
+
+	    memset(&expbuf, 0, sizeof(expbuf));
+	    expbuf.type = bt;
+	    expbuf.index = index;
+	    expbuf.plane = i;
+	    if (ioctl(v4lfd, VIDIOC_EXPBUF, &expbuf) == -1) {
+		perror("VIDIOC_EXPBUF");
+		while (i)
+		    close(dmafd[--i]);
+		return -1;
+	    }
+	    dmafd[i] = expbuf.fd;
+	}
+
+	return 0;
+    }
+
+.. c:type:: v4l2_exportbuffer
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
+.. flat-table:: struct v4l2_exportbuffer
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - Type of the buffer, same as struct
+	:c:type:`v4l2_format` ``type`` or struct
+	:c:type:`v4l2_requestbuffers` ``type``, set
+	by the application. See :c:type:`v4l2_buf_type`
+    * - __u32
+      - ``index``
+      - Number of the buffer, set by the application. This field is only
+	used for :ref:`memory mapping <mmap>` I/O and can range from
+	zero to the number of buffers allocated with the
+	:ref:`VIDIOC_REQBUFS` and/or
+	:ref:`VIDIOC_CREATE_BUFS` ioctls.
+    * - __u32
+      - ``plane``
+      - Index of the plane to be exported when using the multi-planar API.
+	Otherwise this value must be set to zero.
+    * - __u32
+      - ``flags``
+      - Flags for the newly created file, currently only ``O_CLOEXEC``,
+	``O_RDONLY``, ``O_WRONLY``, and ``O_RDWR`` are supported, refer to
+	the manual of open() for more details.
+    * - __s32
+      - ``fd``
+      - The DMABUF file descriptor associated with a buffer. Set by the
+	driver.
+    * - __u32
+      - ``reserved[11]``
+      - Reserved field for future use. Drivers and applications must set
+	the array to zero.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    A queue is not in MMAP mode or DMABUF exporting is not supported or
+    ``flags`` or ``type`` or ``index`` or ``plane`` fields are invalid.