Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 193 insertions, 0 deletions

diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
new file mode 100644
index 000000000..6bdf925f9
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-modulator.rst
@@ -0,0 +1,193 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: V4L
+
+.. _VIDIOC_G_MODULATOR:
+
+********************************************
+ioctl VIDIOC_G_MODULATOR, VIDIOC_S_MODULATOR
+********************************************
+
+Name
+====
+
+VIDIOC_G_MODULATOR - VIDIOC_S_MODULATOR - Get or set modulator attributes
+
+Synopsis
+========
+
+.. c:macro:: VIDIOC_G_MODULATOR
+
+``int ioctl(int fd, VIDIOC_G_MODULATOR, struct v4l2_modulator *argp)``
+
+.. c:macro:: VIDIOC_S_MODULATOR
+
+``int ioctl(int fd, VIDIOC_S_MODULATOR, const struct v4l2_modulator *argp)``
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open()`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_modulator`.
+
+Description
+===========
+
+To query the attributes of a modulator applications initialize the
+``index`` field and zero out the ``reserved`` array of a struct
+:c:type:`v4l2_modulator` and call the
+:ref:`VIDIOC_G_MODULATOR <VIDIOC_G_MODULATOR>` ioctl with a pointer to this structure. Drivers
+fill the rest of the structure or return an ``EINVAL`` error code when the
+index is out of bounds. To enumerate all modulators applications shall
+begin at index zero, incrementing by one until the driver returns
+EINVAL.
+
+Modulators have two writable properties, an audio modulation set and the
+radio frequency. To change the modulated audio subprograms, applications
+initialize the ``index`` and ``txsubchans`` fields and the ``reserved``
+array and call the :ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl. Drivers may choose a
+different audio modulation if the request cannot be satisfied. However
+this is a write-only ioctl, it does not return the actual audio
+modulation selected.
+
+:ref:`SDR <sdr>` specific modulator types are ``V4L2_TUNER_SDR`` and
+``V4L2_TUNER_RF``. For SDR devices ``txsubchans`` field must be
+initialized to zero. The term 'modulator' means SDR transmitter in this
+context.
+
+To change the radio frequency the
+:ref:`VIDIOC_S_FREQUENCY <VIDIOC_G_FREQUENCY>` ioctl is available.
+
+.. tabularcolumns:: |p{2.9cm}|p{2.9cm}|p{5.8cm}|p{2.9cm}|p{2.4cm}|
+
+.. c:type:: v4l2_modulator
+
+.. flat-table:: struct v4l2_modulator
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2 1 1
+
+    * - __u32
+      - ``index``
+      - Identifies the modulator, set by the application.
+    * - __u8
+      - ``name``\ [32]
+      - Name of the modulator, a NUL-terminated ASCII string.
+
+	This information is intended for the user.
+    * - __u32
+      - ``capability``
+      - Modulator capability flags. No flags are defined for this field,
+	the tuner flags in struct :c:type:`v4l2_tuner` are
+	used accordingly. The audio flags indicate the ability to encode
+	audio subprograms. They will *not* change for example with the
+	current video standard.
+    * - __u32
+      - ``rangelow``
+      - The lowest tunable frequency in units of 62.5 KHz, or if the
+	``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units of
+	62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is
+	set, in units of 1 Hz.
+    * - __u32
+      - ``rangehigh``
+      - The highest tunable frequency in units of 62.5 KHz, or if the
+	``capability`` flag ``V4L2_TUNER_CAP_LOW`` is set, in units of
+	62.5 Hz, or if the ``capability`` flag ``V4L2_TUNER_CAP_1HZ`` is
+	set, in units of 1 Hz.
+    * - __u32
+      - ``txsubchans``
+      - With this field applications can determine how audio sub-carriers
+	shall be modulated. It contains a set of flags as defined in
+	:ref:`modulator-txsubchans`.
+
+	.. note::
+
+	   The tuner ``rxsubchans`` flags  are reused, but the
+	   semantics are different. Video output devices
+	   are assumed to have an analog or PCM audio input with 1-3
+	   channels. The ``txsubchans`` flags select one or more channels
+	   for modulation, together with some audio subprogram indicator,
+	   for example, a stereo pilot tone.
+    * - __u32
+      - ``type``
+      - :cspan:`2` Type of the modulator, see :c:type:`v4l2_tuner_type`.
+    * - __u32
+      - ``reserved``\ [3]
+      - Reserved for future extensions.
+
+	Drivers and applications must set the array to zero.
+
+.. tabularcolumns:: |p{6.0cm}|p{2.0cm}|p{9.3cm}|
+
+.. cssclass:: longtable
+
+.. _modulator-txsubchans:
+
+.. flat-table:: Modulator Audio Transmission Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_TUNER_SUB_MONO``
+      - 0x0001
+      - Modulate channel 1 as mono audio, when the input has more
+	channels, a down-mix of channel 1 and 2. This flag does not
+	combine with ``V4L2_TUNER_SUB_STEREO`` or
+	``V4L2_TUNER_SUB_LANG1``.
+    * - ``V4L2_TUNER_SUB_STEREO``
+      - 0x0002
+      - Modulate channel 1 and 2 as left and right channel of a stereo
+	audio signal. When the input has only one channel or two channels
+	and ``V4L2_TUNER_SUB_SAP`` is also set, channel 1 is encoded as
+	left and right channel. This flag does not combine with
+	``V4L2_TUNER_SUB_MONO`` or ``V4L2_TUNER_SUB_LANG1``. When the
+	driver does not support stereo audio it shall fall back to mono.
+    * - ``V4L2_TUNER_SUB_LANG1``
+      - 0x0008
+      - Modulate channel 1 and 2 as primary and secondary language of a
+	bilingual audio signal. When the input has only one channel it is
+	used for both languages. It is not possible to encode the primary
+	or secondary language only. This flag does not combine with
+	``V4L2_TUNER_SUB_MONO``, ``V4L2_TUNER_SUB_STEREO`` or
+	``V4L2_TUNER_SUB_SAP``. If the hardware does not support the
+	respective audio matrix, or the current video standard does not
+	permit bilingual audio the :ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl shall
+	return an ``EINVAL`` error code and the driver shall fall back to mono
+	or stereo mode.
+    * - ``V4L2_TUNER_SUB_LANG2``
+      - 0x0004
+      - Same effect as ``V4L2_TUNER_SUB_SAP``.
+    * - ``V4L2_TUNER_SUB_SAP``
+      - 0x0004
+      - When combined with ``V4L2_TUNER_SUB_MONO`` the first channel is
+	encoded as mono audio, the last channel as Second Audio Program.
+	When the input has only one channel it is used for both audio
+	tracks. When the input has three channels the mono track is a
+	down-mix of channel 1 and 2. When combined with
+	``V4L2_TUNER_SUB_STEREO`` channel 1 and 2 are encoded as left and
+	right stereo audio, channel 3 as Second Audio Program. When the
+	input has only two channels, the first is encoded as left and
+	right channel and the second as SAP. When the input has only one
+	channel it is used for all audio tracks. It is not possible to
+	encode a Second Audio Program only. This flag must combine with
+	``V4L2_TUNER_SUB_MONO`` or ``V4L2_TUNER_SUB_STEREO``. If the
+	hardware does not support the respective audio matrix, or the
+	current video standard does not permit SAP the
+	:ref:`VIDIOC_S_MODULATOR <VIDIOC_G_MODULATOR>` ioctl shall return an ``EINVAL`` error code and
+	driver shall fall back to mono or stereo mode.
+    * - ``V4L2_TUNER_SUB_RDS``
+      - 0x0010
+      - Enable the RDS encoder for a radio FM transmitter.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+EINVAL
+    The struct :c:type:`v4l2_modulator` ``index`` is
+    out of bounds.