Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 303 insertions, 0 deletions

diff --git a/Documentation/virt/hyperv/vmbus.rst b/Documentation/virt/hyperv/vmbus.rst
new file mode 100644
index 000000000..d2012d902
--- /dev/null
+++ b/Documentation/virt/hyperv/vmbus.rst
@@ -0,0 +1,303 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+VMbus
+=====
+VMbus is a software construct provided by Hyper-V to guest VMs.  It
+consists of a control path and common facilities used by synthetic
+devices that Hyper-V presents to guest VMs.   The control path is
+used to offer synthetic devices to the guest VM and, in some cases,
+to rescind those devices.   The common facilities include software
+channels for communicating between the device driver in the guest VM
+and the synthetic device implementation that is part of Hyper-V, and
+signaling primitives to allow Hyper-V and the guest to interrupt
+each other.
+
+VMbus is modeled in Linux as a bus, with the expected /sys/bus/vmbus
+entry in a running Linux guest.  The VMbus driver (drivers/hv/vmbus_drv.c)
+establishes the VMbus control path with the Hyper-V host, then
+registers itself as a Linux bus driver.  It implements the standard
+bus functions for adding and removing devices to/from the bus.
+
+Most synthetic devices offered by Hyper-V have a corresponding Linux
+device driver.  These devices include:
+
+* SCSI controller
+* NIC
+* Graphics frame buffer
+* Keyboard
+* Mouse
+* PCI device pass-thru
+* Heartbeat
+* Time Sync
+* Shutdown
+* Memory balloon
+* Key/Value Pair (KVP) exchange with Hyper-V
+* Hyper-V online backup (a.k.a. VSS)
+
+Guest VMs may have multiple instances of the synthetic SCSI
+controller, synthetic NIC, and PCI pass-thru devices.  Other
+synthetic devices are limited to a single instance per VM.  Not
+listed above are a small number of synthetic devices offered by
+Hyper-V that are used only by Windows guests and for which Linux
+does not have a driver.
+
+Hyper-V uses the terms "VSP" and "VSC" in describing synthetic
+devices.  "VSP" refers to the Hyper-V code that implements a
+particular synthetic device, while "VSC" refers to the driver for
+the device in the guest VM.  For example, the Linux driver for the
+synthetic NIC is referred to as "netvsc" and the Linux driver for
+the synthetic SCSI controller is "storvsc".  These drivers contain
+functions with names like "storvsc_connect_to_vsp".
+
+VMbus channels
+--------------
+An instance of a synthetic device uses VMbus channels to communicate
+between the VSP and the VSC.  Channels are bi-directional and used
+for passing messages.   Most synthetic devices use a single channel,
+but the synthetic SCSI controller and synthetic NIC may use multiple
+channels to achieve higher performance and greater parallelism.
+
+Each channel consists of two ring buffers.  These are classic ring
+buffers from a university data structures textbook.  If the read
+and writes pointers are equal, the ring buffer is considered to be
+empty, so a full ring buffer always has at least one byte unused.
+The "in" ring buffer is for messages from the Hyper-V host to the
+guest, and the "out" ring buffer is for messages from the guest to
+the Hyper-V host.  In Linux, the "in" and "out" designations are as
+viewed by the guest side.  The ring buffers are memory that is
+shared between the guest and the host, and they follow the standard
+paradigm where the memory is allocated by the guest, with the list
+of GPAs that make up the ring buffer communicated to the host.  Each
+ring buffer consists of a header page (4 Kbytes) with the read and
+write indices and some control flags, followed by the memory for the
+actual ring.  The size of the ring is determined by the VSC in the
+guest and is specific to each synthetic device.   The list of GPAs
+making up the ring is communicated to the Hyper-V host over the
+VMbus control path as a GPA Descriptor List (GPADL).  See function
+vmbus_establish_gpadl().
+
+Each ring buffer is mapped into contiguous Linux kernel virtual
+space in three parts:  1) the 4 Kbyte header page, 2) the memory
+that makes up the ring itself, and 3) a second mapping of the memory
+that makes up the ring itself.  Because (2) and (3) are contiguous
+in kernel virtual space, the code that copies data to and from the
+ring buffer need not be concerned with ring buffer wrap-around.
+Once a copy operation has completed, the read or write index may
+need to be reset to point back into the first mapping, but the
+actual data copy does not need to be broken into two parts.  This
+approach also allows complex data structures to be easily accessed
+directly in the ring without handling wrap-around.
+
+On arm64 with page sizes > 4 Kbytes, the header page must still be
+passed to Hyper-V as a 4 Kbyte area.  But the memory for the actual
+ring must be aligned to PAGE_SIZE and have a size that is a multiple
+of PAGE_SIZE so that the duplicate mapping trick can be done.  Hence
+a portion of the header page is unused and not communicated to
+Hyper-V.  This case is handled by vmbus_establish_gpadl().
+
+Hyper-V enforces a limit on the aggregate amount of guest memory
+that can be shared with the host via GPADLs.  This limit ensures
+that a rogue guest can't force the consumption of excessive host
+resources.  For Windows Server 2019 and later, this limit is
+approximately 1280 Mbytes.  For versions prior to Windows Server
+2019, the limit is approximately 384 Mbytes.
+
+VMbus messages
+--------------
+All VMbus messages have a standard header that includes the message
+length, the offset of the message payload, some flags, and a
+transactionID.  The portion of the message after the header is
+unique to each VSP/VSC pair.
+
+Messages follow one of two patterns:
+
+* Unidirectional:  Either side sends a message and does not
+  expect a response message
+* Request/response:  One side (usually the guest) sends a message
+  and expects a response
+
+The transactionID (a.k.a. "requestID") is for matching requests &
+responses.  Some synthetic devices allow multiple requests to be in-
+flight simultaneously, so the guest specifies a transactionID when
+sending a request.  Hyper-V sends back the same transactionID in the
+matching response.
+
+Messages passed between the VSP and VSC are control messages.  For
+example, a message sent from the storvsc driver might be "execute
+this SCSI command".   If a message also implies some data transfer
+between the guest and the Hyper-V host, the actual data to be
+transferred may be embedded with the control message, or it may be
+specified as a separate data buffer that the Hyper-V host will
+access as a DMA operation.  The former case is used when the size of
+the data is small and the cost of copying the data to and from the
+ring buffer is minimal.  For example, time sync messages from the
+Hyper-V host to the guest contain the actual time value.  When the
+data is larger, a separate data buffer is used.  In this case, the
+control message contains a list of GPAs that describe the data
+buffer.  For example, the storvsc driver uses this approach to
+specify the data buffers to/from which disk I/O is done.
+
+Three functions exist to send VMbus messages:
+
+1. vmbus_sendpacket():  Control-only messages and messages with
+   embedded data -- no GPAs
+2. vmbus_sendpacket_pagebuffer(): Message with list of GPAs
+   identifying data to transfer.  An offset and length is
+   associated with each GPA so that multiple discontinuous areas
+   of guest memory can be targeted.
+3. vmbus_sendpacket_mpb_desc(): Message with list of GPAs
+   identifying data to transfer.  A single offset and length is
+   associated with a list of GPAs.  The GPAs must describe a
+   single logical area of guest memory to be targeted.
+
+Historically, Linux guests have trusted Hyper-V to send well-formed
+and valid messages, and Linux drivers for synthetic devices did not
+fully validate messages.  With the introduction of processor
+technologies that fully encrypt guest memory and that allow the
+guest to not trust the hypervisor (AMD SNP-SEV, Intel TDX), trusting
+the Hyper-V host is no longer a valid assumption.  The drivers for
+VMbus synthetic devices are being updated to fully validate any
+values read from memory that is shared with Hyper-V, which includes
+messages from VMbus devices.  To facilitate such validation,
+messages read by the guest from the "in" ring buffer are copied to a
+temporary buffer that is not shared with Hyper-V.  Validation is
+performed in this temporary buffer without the risk of Hyper-V
+maliciously modifying the message after it is validated but before
+it is used.
+
+VMbus interrupts
+----------------
+VMbus provides a mechanism for the guest to interrupt the host when
+the guest has queued new messages in a ring buffer.  The host
+expects that the guest will send an interrupt only when an "out"
+ring buffer transitions from empty to non-empty.  If the guest sends
+interrupts at other times, the host deems such interrupts to be
+unnecessary.  If a guest sends an excessive number of unnecessary
+interrupts, the host may throttle that guest by suspending its
+execution for a few seconds to prevent a denial-of-service attack.
+
+Similarly, the host will interrupt the guest when it sends a new
+message on the VMbus control path, or when a VMbus channel "in" ring
+buffer transitions from empty to non-empty.  Each CPU in the guest
+may receive VMbus interrupts, so they are best modeled as per-CPU
+interrupts in Linux.  This model works well on arm64 where a single
+per-CPU IRQ is allocated for VMbus.  Since x86/x64 lacks support for
+per-CPU IRQs, an x86 interrupt vector is statically allocated (see
+HYPERVISOR_CALLBACK_VECTOR) across all CPUs and explicitly coded to
+call the VMbus interrupt service routine.  These interrupts are
+visible in /proc/interrupts on the "HYP" line.
+
+The guest CPU that a VMbus channel will interrupt is selected by the
+guest when the channel is created, and the host is informed of that
+selection.  VMbus devices are broadly grouped into two categories:
+
+1. "Slow" devices that need only one VMbus channel.  The devices
+   (such as keyboard, mouse, heartbeat, and timesync) generate
+   relatively few interrupts.  Their VMbus channels are all
+   assigned to interrupt the VMBUS_CONNECT_CPU, which is always
+   CPU 0.
+
+2. "High speed" devices that may use multiple VMbus channels for
+   higher parallelism and performance.  These devices include the
+   synthetic SCSI controller and synthetic NIC.  Their VMbus
+   channels interrupts are assigned to CPUs that are spread out
+   among the available CPUs in the VM so that interrupts on
+   multiple channels can be processed in parallel.
+
+The assignment of VMbus channel interrupts to CPUs is done in the
+function init_vp_index().  This assignment is done outside of the
+normal Linux interrupt affinity mechanism, so the interrupts are
+neither "unmanaged" nor "managed" interrupts.
+
+The CPU that a VMbus channel will interrupt can be seen in
+/sys/bus/vmbus/devices/<deviceGUID>/ channels/<channelRelID>/cpu.
+When running on later versions of Hyper-V, the CPU can be changed
+by writing a new value to this sysfs entry.  Because the interrupt
+assignment is done outside of the normal Linux affinity mechanism,
+there are no entries in /proc/irq corresponding to individual
+VMbus channel interrupts.
+
+An online CPU in a Linux guest may not be taken offline if it has
+VMbus channel interrupts assigned to it.  Any such channel
+interrupts must first be manually reassigned to another CPU as
+described above.  When no channel interrupts are assigned to the
+CPU, it can be taken offline.
+
+When a guest CPU receives a VMbus interrupt from the host, the
+function vmbus_isr() handles the interrupt.  It first checks for
+channel interrupts by calling vmbus_chan_sched(), which looks at a
+bitmap setup by the host to determine which channels have pending
+interrupts on this CPU.  If multiple channels have pending
+interrupts for this CPU, they are processed sequentially.  When all
+channel interrupts have been processed, vmbus_isr() checks for and
+processes any message received on the VMbus control path.
+
+The VMbus channel interrupt handling code is designed to work
+correctly even if an interrupt is received on a CPU other than the
+CPU assigned to the channel.  Specifically, the code does not use
+CPU-based exclusion for correctness.  In normal operation, Hyper-V
+will interrupt the assigned CPU.  But when the CPU assigned to a
+channel is being changed via sysfs, the guest doesn't know exactly
+when Hyper-V will make the transition.  The code must work correctly
+even if there is a time lag before Hyper-V starts interrupting the
+new CPU.  See comments in target_cpu_store().
+
+VMbus device creation/deletion
+------------------------------
+Hyper-V and the Linux guest have a separate message-passing path
+that is used for synthetic device creation and deletion. This
+path does not use a VMbus channel.  See vmbus_post_msg() and
+vmbus_on_msg_dpc().
+
+The first step is for the guest to connect to the generic
+Hyper-V VMbus mechanism.  As part of establishing this connection,
+the guest and Hyper-V agree on a VMbus protocol version they will
+use.  This negotiation allows newer Linux kernels to run on older
+Hyper-V versions, and vice versa.
+
+The guest then tells Hyper-V to "send offers".  Hyper-V sends an
+offer message to the guest for each synthetic device that the VM
+is configured to have. Each VMbus device type has a fixed GUID
+known as the "class ID", and each VMbus device instance is also
+identified by a GUID. The offer message from Hyper-V contains
+both GUIDs to uniquely (within the VM) identify the device.
+There is one offer message for each device instance, so a VM with
+two synthetic NICs will get two offers messages with the NIC
+class ID. The ordering of offer messages can vary from boot-to-boot
+and must not be assumed to be consistent in Linux code. Offer
+messages may also arrive long after Linux has initially booted
+because Hyper-V supports adding devices, such as synthetic NICs,
+to running VMs. A new offer message is processed by
+vmbus_process_offer(), which indirectly invokes vmbus_add_channel_work().
+
+Upon receipt of an offer message, the guest identifies the device
+type based on the class ID, and invokes the correct driver to set up
+the device.  Driver/device matching is performed using the standard
+Linux mechanism.
+
+The device driver probe function opens the primary VMbus channel to
+the corresponding VSP. It allocates guest memory for the channel
+ring buffers and shares the ring buffer with the Hyper-V host by
+giving the host a list of GPAs for the ring buffer memory.  See
+vmbus_establish_gpadl().
+
+Once the ring buffer is set up, the device driver and VSP exchange
+setup messages via the primary channel.  These messages may include
+negotiating the device protocol version to be used between the Linux
+VSC and the VSP on the Hyper-V host.  The setup messages may also
+include creating additional VMbus channels, which are somewhat
+mis-named as "sub-channels" since they are functionally
+equivalent to the primary channel once they are created.
+
+Finally, the device driver may create entries in /dev as with
+any device driver.
+
+The Hyper-V host can send a "rescind" message to the guest to
+remove a device that was previously offered. Linux drivers must
+handle such a rescind message at any time. Rescinding a device
+invokes the device driver "remove" function to cleanly shut
+down the device and remove it. Once a synthetic device is
+rescinded, neither Hyper-V nor Linux retains any state about
+its previous existence. Such a device might be re-added later,
+in which case it is treated as an entirely new device. See
+vmbus_onoffer_rescind().