Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 166 insertions, 0 deletions

diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst
new file mode 100644
index 000000000..ea96559ba
--- /dev/null
+++ b/Documentation/virt/kvm/devices/s390_flic.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================
+FLIC (floating interrupt controller)
+====================================
+
+FLIC handles floating (non per-cpu) interrupts, i.e. I/O, service and some
+machine check interruptions. All interrupts are stored in a per-vm list of
+pending interrupts. FLIC performs operations on this list.
+
+Only one FLIC instance may be instantiated.
+
+FLIC provides support to
+- add interrupts (KVM_DEV_FLIC_ENQUEUE)
+- inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS)
+- purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS)
+- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ)
+- enable/disable for the guest transparent async page faults
+- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
+- modify AIS (adapter-interruption-suppression) mode state (KVM_DEV_FLIC_AISM)
+- inject adapter interrupts on a specified adapter (KVM_DEV_FLIC_AIRQ_INJECT)
+- get/set all AIS mode states (KVM_DEV_FLIC_AISM_ALL)
+
+Groups:
+  KVM_DEV_FLIC_ENQUEUE
+    Passes a buffer and length into the kernel which are then injected into
+    the list of pending interrupts.
+    attr->addr contains the pointer to the buffer and attr->attr contains
+    the length of the buffer.
+    The format of the data structure kvm_s390_irq as it is copied from userspace
+    is defined in usr/include/linux/kvm.h.
+
+  KVM_DEV_FLIC_GET_ALL_IRQS
+    Copies all floating interrupts into a buffer provided by userspace.
+    When the buffer is too small it returns -ENOMEM, which is the indication
+    for userspace to try again with a bigger buffer.
+
+    -ENOBUFS is returned when the allocation of a kernelspace buffer has
+    failed.
+
+    -EFAULT is returned when copying data to userspace failed.
+    All interrupts remain pending, i.e. are not deleted from the list of
+    currently pending interrupts.
+    attr->addr contains the userspace address of the buffer into which all
+    interrupt data will be copied.
+    attr->attr contains the size of the buffer in bytes.
+
+  KVM_DEV_FLIC_CLEAR_IRQS
+    Simply deletes all elements from the list of currently pending floating
+    interrupts.  No interrupts are injected into the guest.
+
+  KVM_DEV_FLIC_CLEAR_IO_IRQ
+    Deletes one (if any) I/O interrupt for a subchannel identified by the
+    subsystem identification word passed via the buffer specified by
+    attr->addr (address) and attr->attr (length).
+
+  KVM_DEV_FLIC_APF_ENABLE
+    Enables async page faults for the guest. So in case of a major page fault
+    the host is allowed to handle this async and continues the guest.
+
+  KVM_DEV_FLIC_APF_DISABLE_WAIT
+    Disables async page faults for the guest and waits until already pending
+    async page faults are done. This is necessary to trigger a completion interrupt
+    for every init interrupt before migrating the interrupt list.
+
+  KVM_DEV_FLIC_ADAPTER_REGISTER
+    Register an I/O adapter interrupt source. Takes a kvm_s390_io_adapter
+    describing the adapter to register::
+
+	struct kvm_s390_io_adapter {
+		__u32 id;
+		__u8 isc;
+		__u8 maskable;
+		__u8 swap;
+		__u8 flags;
+	};
+
+   id contains the unique id for the adapter, isc the I/O interruption subclass
+   to use, maskable whether this adapter may be masked (interrupts turned off),
+   swap whether the indicators need to be byte swapped, and flags contains
+   further characteristics of the adapter.
+
+   Currently defined values for 'flags' are:
+
+   - KVM_S390_ADAPTER_SUPPRESSIBLE: adapter is subject to AIS
+     (adapter-interrupt-suppression) facility. This flag only has an effect if
+     the AIS capability is enabled.
+
+   Unknown flag values are ignored.
+
+
+  KVM_DEV_FLIC_ADAPTER_MODIFY
+    Modifies attributes of an existing I/O adapter interrupt source. Takes
+    a kvm_s390_io_adapter_req specifying the adapter and the operation::
+
+	struct kvm_s390_io_adapter_req {
+		__u32 id;
+		__u8 type;
+		__u8 mask;
+		__u16 pad0;
+		__u64 addr;
+	};
+
+    id specifies the adapter and type the operation. The supported operations
+    are:
+
+    KVM_S390_IO_ADAPTER_MASK
+      mask or unmask the adapter, as specified in mask
+
+    KVM_S390_IO_ADAPTER_MAP
+      This is now a no-op. The mapping is purely done by the irq route.
+    KVM_S390_IO_ADAPTER_UNMAP
+      This is now a no-op. The mapping is purely done by the irq route.
+
+  KVM_DEV_FLIC_AISM
+    modify the adapter-interruption-suppression mode for a given isc if the
+    AIS capability is enabled. Takes a kvm_s390_ais_req describing::
+
+	struct kvm_s390_ais_req {
+		__u8 isc;
+		__u16 mode;
+	};
+
+    isc contains the target I/O interruption subclass, mode the target
+    adapter-interruption-suppression mode. The following modes are
+    currently supported:
+
+    - KVM_S390_AIS_MODE_ALL: ALL-Interruptions Mode, i.e. airq injection
+      is always allowed;
+    - KVM_S390_AIS_MODE_SINGLE: SINGLE-Interruption Mode, i.e. airq
+      injection is only allowed once and the following adapter interrupts
+      will be suppressed until the mode is set again to ALL-Interruptions
+      or SINGLE-Interruption mode.
+
+  KVM_DEV_FLIC_AIRQ_INJECT
+    Inject adapter interrupts on a specified adapter.
+    attr->attr contains the unique id for the adapter, which allows for
+    adapter-specific checks and actions.
+    For adapters subject to AIS, handle the airq injection suppression for
+    an isc according to the adapter-interruption-suppression mode on condition
+    that the AIS capability is enabled.
+
+  KVM_DEV_FLIC_AISM_ALL
+    Gets or sets the adapter-interruption-suppression mode for all ISCs. Takes
+    a kvm_s390_ais_all describing::
+
+	struct kvm_s390_ais_all {
+	       __u8 simm; /* Single-Interruption-Mode mask */
+	       __u8 nimm; /* No-Interruption-Mode mask *
+	};
+
+    simm contains Single-Interruption-Mode mask for all ISCs, nimm contains
+    No-Interruption-Mode mask for all ISCs. Each bit in simm and nimm corresponds
+    to an ISC (MSB0 bit 0 to ISC 0 and so on). The combination of simm bit and
+    nimm bit presents AIS mode for a ISC.
+
+    KVM_DEV_FLIC_AISM_ALL is indicated by KVM_CAP_S390_AIS_MIGRATION.
+
+Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on
+FLIC with an unknown group or attribute gives the error code EINVAL (instead of
+ENXIO, as specified in the API documentation). It is not possible to conclude
+that a FLIC operation is unavailable based on the error code resulting from a
+usage attempt.
+
+.. note:: The KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl will return EINVAL in case a
+	  zero schid is specified.