Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 261 insertions, 0 deletions

diff --git a/Documentation/x86/tdx.rst b/Documentation/x86/tdx.rst
new file mode 100644
index 000000000..dc8d9fd2c
--- /dev/null
+++ b/Documentation/x86/tdx.rst
@@ -0,0 +1,261 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Intel Trust Domain Extensions (TDX)
+=====================================
+
+Intel's Trust Domain Extensions (TDX) protect confidential guest VMs from
+the host and physical attacks by isolating the guest register state and by
+encrypting the guest memory. In TDX, a special module running in a special
+mode sits between the host and the guest and manages the guest/host
+separation.
+
+Since the host cannot directly access guest registers or memory, much
+normal functionality of a hypervisor must be moved into the guest. This is
+implemented using a Virtualization Exception (#VE) that is handled by the
+guest kernel. A #VE is handled entirely inside the guest kernel, but some
+require the hypervisor to be consulted.
+
+TDX includes new hypercall-like mechanisms for communicating from the
+guest to the hypervisor or the TDX module.
+
+New TDX Exceptions
+==================
+
+TDX guests behave differently from bare-metal and traditional VMX guests.
+In TDX guests, otherwise normal instructions or memory accesses can cause
+#VE or #GP exceptions.
+
+Instructions marked with an '*' conditionally cause exceptions.  The
+details for these instructions are discussed below.
+
+Instruction-based #VE
+---------------------
+
+- Port I/O (INS, OUTS, IN, OUT)
+- HLT
+- MONITOR, MWAIT
+- WBINVD, INVD
+- VMCALL
+- RDMSR*,WRMSR*
+- CPUID*
+
+Instruction-based #GP
+---------------------
+
+- All VMX instructions: INVEPT, INVVPID, VMCLEAR, VMFUNC, VMLAUNCH,
+  VMPTRLD, VMPTRST, VMREAD, VMRESUME, VMWRITE, VMXOFF, VMXON
+- ENCLS, ENCLU
+- GETSEC
+- RSM
+- ENQCMD
+- RDMSR*,WRMSR*
+
+RDMSR/WRMSR Behavior
+--------------------
+
+MSR access behavior falls into three categories:
+
+- #GP generated
+- #VE generated
+- "Just works"
+
+In general, the #GP MSRs should not be used in guests.  Their use likely
+indicates a bug in the guest.  The guest may try to handle the #GP with a
+hypercall but it is unlikely to succeed.
+
+The #VE MSRs are typically able to be handled by the hypervisor.  Guests
+can make a hypercall to the hypervisor to handle the #VE.
+
+The "just works" MSRs do not need any special guest handling.  They might
+be implemented by directly passing through the MSR to the hardware or by
+trapping and handling in the TDX module.  Other than possibly being slow,
+these MSRs appear to function just as they would on bare metal.
+
+CPUID Behavior
+--------------
+
+For some CPUID leaves and sub-leaves, the virtualized bit fields of CPUID
+return values (in guest EAX/EBX/ECX/EDX) are configurable by the
+hypervisor. For such cases, the Intel TDX module architecture defines two
+virtualization types:
+
+- Bit fields for which the hypervisor controls the value seen by the guest
+  TD.
+
+- Bit fields for which the hypervisor configures the value such that the
+  guest TD either sees their native value or a value of 0.  For these bit
+  fields, the hypervisor can mask off the native values, but it can not
+  turn *on* values.
+
+A #VE is generated for CPUID leaves and sub-leaves that the TDX module does
+not know how to handle. The guest kernel may ask the hypervisor for the
+value with a hypercall.
+
+#VE on Memory Accesses
+======================
+
+There are essentially two classes of TDX memory: private and shared.
+Private memory receives full TDX protections.  Its content is protected
+against access from the hypervisor.  Shared memory is expected to be
+shared between guest and hypervisor and does not receive full TDX
+protections.
+
+A TD guest is in control of whether its memory accesses are treated as
+private or shared.  It selects the behavior with a bit in its page table
+entries.  This helps ensure that a guest does not place sensitive
+information in shared memory, exposing it to the untrusted hypervisor.
+
+#VE on Shared Memory
+--------------------
+
+Access to shared mappings can cause a #VE.  The hypervisor ultimately
+controls whether a shared memory access causes a #VE, so the guest must be
+careful to only reference shared pages it can safely handle a #VE.  For
+instance, the guest should be careful not to access shared memory in the
+#VE handler before it reads the #VE info structure (TDG.VP.VEINFO.GET).
+
+Shared mapping content is entirely controlled by the hypervisor. The guest
+should only use shared mappings for communicating with the hypervisor.
+Shared mappings must never be used for sensitive memory content like kernel
+stacks.  A good rule of thumb is that hypervisor-shared memory should be
+treated the same as memory mapped to userspace.  Both the hypervisor and
+userspace are completely untrusted.
+
+MMIO for virtual devices is implemented as shared memory.  The guest must
+be careful not to access device MMIO regions unless it is also prepared to
+handle a #VE.
+
+#VE on Private Pages
+--------------------
+
+An access to private mappings can also cause a #VE.  Since all kernel
+memory is also private memory, the kernel might theoretically need to
+handle a #VE on arbitrary kernel memory accesses.  This is not feasible, so
+TDX guests ensure that all guest memory has been "accepted" before memory
+is used by the kernel.
+
+A modest amount of memory (typically 512M) is pre-accepted by the firmware
+before the kernel runs to ensure that the kernel can start up without
+being subjected to a #VE.
+
+The hypervisor is permitted to unilaterally move accepted pages to a
+"blocked" state. However, if it does this, page access will not generate a
+#VE.  It will, instead, cause a "TD Exit" where the hypervisor is required
+to handle the exception.
+
+Linux #VE handler
+=================
+
+Just like page faults or #GP's, #VE exceptions can be either handled or be
+fatal.  Typically, an unhandled userspace #VE results in a SIGSEGV.
+An unhandled kernel #VE results in an oops.
+
+Handling nested exceptions on x86 is typically nasty business.  A #VE
+could be interrupted by an NMI which triggers another #VE and hilarity
+ensues.  The TDX #VE architecture anticipated this scenario and includes a
+feature to make it slightly less nasty.
+
+During #VE handling, the TDX module ensures that all interrupts (including
+NMIs) are blocked.  The block remains in place until the guest makes a
+TDG.VP.VEINFO.GET TDCALL.  This allows the guest to control when interrupts
+or a new #VE can be delivered.
+
+However, the guest kernel must still be careful to avoid potential
+#VE-triggering actions (discussed above) while this block is in place.
+While the block is in place, any #VE is elevated to a double fault (#DF)
+which is not recoverable.
+
+MMIO handling
+=============
+
+In non-TDX VMs, MMIO is usually implemented by giving a guest access to a
+mapping which will cause a VMEXIT on access, and then the hypervisor
+emulates the access.  That is not possible in TDX guests because VMEXIT
+will expose the register state to the host. TDX guests don't trust the host
+and can't have their state exposed to the host.
+
+In TDX, MMIO regions typically trigger a #VE exception in the guest.  The
+guest #VE handler then emulates the MMIO instruction inside the guest and
+converts it into a controlled TDCALL to the host, rather than exposing
+guest state to the host.
+
+MMIO addresses on x86 are just special physical addresses. They can
+theoretically be accessed with any instruction that accesses memory.
+However, the kernel instruction decoding method is limited. It is only
+designed to decode instructions like those generated by io.h macros.
+
+MMIO access via other means (like structure overlays) may result in an
+oops.
+
+Shared Memory Conversions
+=========================
+
+All TDX guest memory starts out as private at boot.  This memory can not
+be accessed by the hypervisor.  However, some kernel users like device
+drivers might have a need to share data with the hypervisor.  To do this,
+memory must be converted between shared and private.  This can be
+accomplished using some existing memory encryption helpers:
+
+ * set_memory_decrypted() converts a range of pages to shared.
+ * set_memory_encrypted() converts memory back to private.
+
+Device drivers are the primary user of shared memory, but there's no need
+to touch every driver. DMA buffers and ioremap() do the conversions
+automatically.
+
+TDX uses SWIOTLB for most DMA allocations. The SWIOTLB buffer is
+converted to shared on boot.
+
+For coherent DMA allocation, the DMA buffer gets converted on the
+allocation. Check force_dma_unencrypted() for details.
+
+Attestation
+===========
+
+Attestation is used to verify the TDX guest trustworthiness to other
+entities before provisioning secrets to the guest. For example, a key
+server may want to use attestation to verify that the guest is the
+desired one before releasing the encryption keys to mount the encrypted
+rootfs or a secondary drive.
+
+The TDX module records the state of the TDX guest in various stages of
+the guest boot process using the build time measurement register (MRTD)
+and runtime measurement registers (RTMR). Measurements related to the
+guest initial configuration and firmware image are recorded in the MRTD
+register. Measurements related to initial state, kernel image, firmware
+image, command line options, initrd, ACPI tables, etc are recorded in
+RTMR registers. For more details, as an example, please refer to TDX
+Virtual Firmware design specification, section titled "TD Measurement".
+At TDX guest runtime, the attestation process is used to attest to these
+measurements.
+
+The attestation process consists of two steps: TDREPORT generation and
+Quote generation.
+
+TDX guest uses TDCALL[TDG.MR.REPORT] to get the TDREPORT (TDREPORT_STRUCT)
+from the TDX module. TDREPORT is a fixed-size data structure generated by
+the TDX module which contains guest-specific information (such as build
+and boot measurements), platform security version, and the MAC to protect
+the integrity of the TDREPORT. A user-provided 64-Byte REPORTDATA is used
+as input and included in the TDREPORT. Typically it can be some nonce
+provided by attestation service so the TDREPORT can be verified uniquely.
+More details about the TDREPORT can be found in Intel TDX Module
+specification, section titled "TDG.MR.REPORT Leaf".
+
+After getting the TDREPORT, the second step of the attestation process
+is to send it to the Quoting Enclave (QE) to generate the Quote. TDREPORT
+by design can only be verified on the local platform as the MAC key is
+bound to the platform. To support remote verification of the TDREPORT,
+TDX leverages Intel SGX Quoting Enclave to verify the TDREPORT locally
+and convert it to a remotely verifiable Quote. Method of sending TDREPORT
+to QE is implementation specific. Attestation software can choose
+whatever communication channel available (i.e. vsock or TCP/IP) to
+send the TDREPORT to QE and receive the Quote.
+
+References
+==========
+
+TDX reference material is collected here:
+
+https://www.intel.com/content/www/us/en/developer/articles/technical/intel-trust-domain-extensions.html