Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 234 insertions, 0 deletions

diff --git a/Documentation/x86/topology.rst b/Documentation/x86/topology.rst
new file mode 100644
index 000000000..7f58010ea
--- /dev/null
+++ b/Documentation/x86/topology.rst
@@ -0,0 +1,234 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+x86 Topology
+============
+
+This documents and clarifies the main aspects of x86 topology modelling and
+representation in the kernel. Update/change when doing changes to the
+respective code.
+
+The architecture-agnostic topology definitions are in
+Documentation/admin-guide/cputopology.rst. This file holds x86-specific
+differences/specialities which must not necessarily apply to the generic
+definitions. Thus, the way to read up on Linux topology on x86 is to start
+with the generic one and look at this one in parallel for the x86 specifics.
+
+Needless to say, code should use the generic functions - this file is *only*
+here to *document* the inner workings of x86 topology.
+
+Started by Thomas Gleixner <tglx@linutronix.de> and Borislav Petkov <bp@alien8.de>.
+
+The main aim of the topology facilities is to present adequate interfaces to
+code which needs to know/query/use the structure of the running system wrt
+threads, cores, packages, etc.
+
+The kernel does not care about the concept of physical sockets because a
+socket has no relevance to software. It's an electromechanical component. In
+the past a socket always contained a single package (see below), but with the
+advent of Multi Chip Modules (MCM) a socket can hold more than one package. So
+there might be still references to sockets in the code, but they are of
+historical nature and should be cleaned up.
+
+The topology of a system is described in the units of:
+
+    - packages
+    - cores
+    - threads
+
+Package
+=======
+Packages contain a number of cores plus shared resources, e.g. DRAM
+controller, shared caches etc.
+
+Modern systems may also use the term 'Die' for package.
+
+AMD nomenclature for package is 'Node'.
+
+Package-related topology information in the kernel:
+
+  - cpuinfo_x86.x86_max_cores:
+
+    The number of cores in a package. This information is retrieved via CPUID.
+
+  - cpuinfo_x86.x86_max_dies:
+
+    The number of dies in a package. This information is retrieved via CPUID.
+
+  - cpuinfo_x86.cpu_die_id:
+
+    The physical ID of the die. This information is retrieved via CPUID.
+
+  - cpuinfo_x86.phys_proc_id:
+
+    The physical ID of the package. This information is retrieved via CPUID
+    and deduced from the APIC IDs of the cores in the package.
+
+    Modern systems use this value for the socket. There may be multiple
+    packages within a socket. This value may differ from cpu_die_id.
+
+  - cpuinfo_x86.logical_proc_id:
+
+    The logical ID of the package. As we do not trust BIOSes to enumerate the
+    packages in a consistent way, we introduced the concept of logical package
+    ID so we can sanely calculate the number of maximum possible packages in
+    the system and have the packages enumerated linearly.
+
+  - topology_max_packages():
+
+    The maximum possible number of packages in the system. Helpful for per
+    package facilities to preallocate per package information.
+
+  - cpu_llc_id:
+
+    A per-CPU variable containing:
+
+      - On Intel, the first APIC ID of the list of CPUs sharing the Last Level
+        Cache
+
+      - On AMD, the Node ID or Core Complex ID containing the Last Level
+        Cache. In general, it is a number identifying an LLC uniquely on the
+        system.
+
+Cores
+=====
+A core consists of 1 or more threads. It does not matter whether the threads
+are SMT- or CMT-type threads.
+
+AMDs nomenclature for a CMT core is "Compute Unit". The kernel always uses
+"core".
+
+Core-related topology information in the kernel:
+
+  - smp_num_siblings:
+
+    The number of threads in a core. The number of threads in a package can be
+    calculated by::
+
+	threads_per_package = cpuinfo_x86.x86_max_cores * smp_num_siblings
+
+
+Threads
+=======
+A thread is a single scheduling unit. It's the equivalent to a logical Linux
+CPU.
+
+AMDs nomenclature for CMT threads is "Compute Unit Core". The kernel always
+uses "thread".
+
+Thread-related topology information in the kernel:
+
+  - topology_core_cpumask():
+
+    The cpumask contains all online threads in the package to which a thread
+    belongs.
+
+    The number of online threads is also printed in /proc/cpuinfo "siblings."
+
+  - topology_sibling_cpumask():
+
+    The cpumask contains all online threads in the core to which a thread
+    belongs.
+
+  - topology_logical_package_id():
+
+    The logical package ID to which a thread belongs.
+
+  - topology_physical_package_id():
+
+    The physical package ID to which a thread belongs.
+
+  - topology_core_id();
+
+    The ID of the core to which a thread belongs. It is also printed in /proc/cpuinfo
+    "core_id."
+
+
+
+System topology examples
+========================
+
+.. note::
+  The alternative Linux CPU enumeration depends on how the BIOS enumerates the
+  threads. Many BIOSes enumerate all threads 0 first and then all threads 1.
+  That has the "advantage" that the logical Linux CPU numbers of threads 0 stay
+  the same whether threads are enabled or not. That's merely an implementation
+  detail and has no practical impact.
+
+1) Single Package, Single Core::
+
+   [package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+
+2) Single Package, Dual Core
+
+   a) One thread per core::
+
+	[package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+		    -> [core 1] -> [thread 0] -> Linux CPU 1
+
+   b) Two threads per core::
+
+	[package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+				-> [thread 1] -> Linux CPU 1
+		    -> [core 1] -> [thread 0] -> Linux CPU 2
+				-> [thread 1] -> Linux CPU 3
+
+      Alternative enumeration::
+
+	[package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+				-> [thread 1] -> Linux CPU 2
+		    -> [core 1] -> [thread 0] -> Linux CPU 1
+				-> [thread 1] -> Linux CPU 3
+
+      AMD nomenclature for CMT systems::
+
+	[node 0] -> [Compute Unit 0] -> [Compute Unit Core 0] -> Linux CPU 0
+				     -> [Compute Unit Core 1] -> Linux CPU 1
+		 -> [Compute Unit 1] -> [Compute Unit Core 0] -> Linux CPU 2
+				     -> [Compute Unit Core 1] -> Linux CPU 3
+
+4) Dual Package, Dual Core
+
+   a) One thread per core::
+
+	[package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+		    -> [core 1] -> [thread 0] -> Linux CPU 1
+
+	[package 1] -> [core 0] -> [thread 0] -> Linux CPU 2
+		    -> [core 1] -> [thread 0] -> Linux CPU 3
+
+   b) Two threads per core::
+
+	[package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+				-> [thread 1] -> Linux CPU 1
+		    -> [core 1] -> [thread 0] -> Linux CPU 2
+				-> [thread 1] -> Linux CPU 3
+
+	[package 1] -> [core 0] -> [thread 0] -> Linux CPU 4
+				-> [thread 1] -> Linux CPU 5
+		    -> [core 1] -> [thread 0] -> Linux CPU 6
+				-> [thread 1] -> Linux CPU 7
+
+      Alternative enumeration::
+
+	[package 0] -> [core 0] -> [thread 0] -> Linux CPU 0
+				-> [thread 1] -> Linux CPU 4
+		    -> [core 1] -> [thread 0] -> Linux CPU 1
+				-> [thread 1] -> Linux CPU 5
+
+	[package 1] -> [core 0] -> [thread 0] -> Linux CPU 2
+				-> [thread 1] -> Linux CPU 6
+		    -> [core 1] -> [thread 0] -> Linux CPU 3
+				-> [thread 1] -> Linux CPU 7
+
+      AMD nomenclature for CMT systems::
+
+	[node 0] -> [Compute Unit 0] -> [Compute Unit Core 0] -> Linux CPU 0
+				     -> [Compute Unit Core 1] -> Linux CPU 1
+		 -> [Compute Unit 1] -> [Compute Unit Core 0] -> Linux CPU 2
+				     -> [Compute Unit Core 1] -> Linux CPU 3
+
+	[node 1] -> [Compute Unit 0] -> [Compute Unit Core 0] -> Linux CPU 4
+				     -> [Compute Unit Core 1] -> Linux CPU 5
+		 -> [Compute Unit 1] -> [Compute Unit Core 0] -> Linux CPU 6
+				     -> [Compute Unit Core 1] -> Linux CPU 7