Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 624 insertions, 0 deletions

diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
new file mode 100644
index 000000000..98d5b6ff8
--- /dev/null
+++ b/arch/alpha/kernel/core_t2.c
@@ -0,0 +1,624 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/core_t2.c
+ *
+ * Written by Jay A Estabrook (jestabro@amt.tay1.dec.com).
+ * December 1996.
+ *
+ * based on CIA code by David A Rusling (david.rusling@reo.mts.dec.com)
+ *
+ * Code common to all T2 core logic chips.
+ */
+
+#define __EXTERN_INLINE
+#include <asm/io.h>
+#include <asm/core_t2.h>
+#undef __EXTERN_INLINE
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/ptrace.h>
+#include <asm/delay.h>
+#include <asm/mce.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+/* For dumping initial DMA window settings. */
+#define DEBUG_PRINT_INITIAL_SETTINGS 0
+
+/* For dumping final DMA window settings. */
+#define DEBUG_PRINT_FINAL_SETTINGS 0
+
+/*
+ * By default, we direct-map starting at 2GB, in order to allow the
+ * maximum size direct-map window (2GB) to match the maximum amount of
+ * memory (2GB) that can be present on SABLEs. But that limits the
+ * floppy to DMA only via the scatter/gather window set up for 8MB
+ * ISA DMA, since the maximum ISA DMA address is 2GB-1.
+ *
+ * For now, this seems a reasonable trade-off: even though most SABLEs
+ * have less than 1GB of memory, floppy usage/performance will not
+ * really be affected by forcing it to go via scatter/gather...
+ */
+#define T2_DIRECTMAP_2G 1
+
+#if T2_DIRECTMAP_2G
+# define T2_DIRECTMAP_START	0x80000000UL
+# define T2_DIRECTMAP_LENGTH	0x80000000UL
+#else
+# define T2_DIRECTMAP_START	0x40000000UL
+# define T2_DIRECTMAP_LENGTH	0x40000000UL
+#endif
+
+/* The ISA scatter/gather window settings. */
+#define T2_ISA_SG_START		0x00800000UL
+#define T2_ISA_SG_LENGTH	0x00800000UL
+
+/*
+ * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
+ * One plausible explanation is that the i/o controller does not properly
+ * handle the system transaction.  Another involves timing.  Ho hum.
+ */
+
+/*
+ * BIOS32-style PCI interface:
+ */
+
+#define DEBUG_CONFIG 0
+
+#if DEBUG_CONFIG
+# define DBG(args)	printk args
+#else
+# define DBG(args)
+#endif
+
+static volatile unsigned int t2_mcheck_any_expected;
+static volatile unsigned int t2_mcheck_last_taken;
+
+/* Place to save the DMA Window registers as set up by SRM
+   for restoration during shutdown. */
+static struct
+{
+	struct {
+		unsigned long wbase;
+		unsigned long wmask;
+		unsigned long tbase;
+	} window[2];
+	unsigned long hae_1;
+  	unsigned long hae_2;
+	unsigned long hae_3;
+	unsigned long hae_4;
+	unsigned long hbase;
+} t2_saved_config __attribute((common));
+
+/*
+ * Given a bus, device, and function number, compute resulting
+ * configuration space address and setup the T2_HAXR2 register
+ * accordingly.  It is therefore not safe to have concurrent
+ * invocations to configuration space access routines, but there
+ * really shouldn't be any need for this.
+ *
+ * Type 0:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:11	Device select bit.
+ * 	10:8	Function number
+ * 	 7:2	Register number
+ *
+ * Type 1:
+ *
+ *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
+ *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ *	31:24	reserved
+ *	23:16	bus number (8 bits = 128 possible buses)
+ *	15:11	Device number (5 bits)
+ *	10:8	function number
+ *	 7:2	register number
+ *  
+ * Notes:
+ *	The function number selects which function of a multi-function device 
+ *	(e.g., SCSI and Ethernet).
+ * 
+ *	The register selects a DWORD (32 bit) register offset.  Hence it
+ *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
+ *	bits.
+ */
+
+static int
+mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
+	     unsigned long *pci_addr, unsigned char *type1)
+{
+	unsigned long addr;
+	u8 bus = pbus->number;
+
+	DBG(("mk_conf_addr(bus=%d, dfn=0x%x, where=0x%x,"
+	     " addr=0x%lx, type1=0x%x)\n",
+	     bus, device_fn, where, pci_addr, type1));
+
+	if (bus == 0) {
+		int device = device_fn >> 3;
+
+		/* Type 0 configuration cycle.  */
+
+		if (device > 8) {
+			DBG(("mk_conf_addr: device (%d)>20, returning -1\n",
+			     device));
+			return -1;
+		}
+
+		*type1 = 0;
+		addr = (0x0800L << device) | ((device_fn & 7) << 8) | (where);
+	} else {
+		/* Type 1 configuration cycle.  */
+		*type1 = 1;
+		addr = (bus << 16) | (device_fn << 8) | (where);
+	}
+	*pci_addr = addr;
+	DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
+	return 0;
+}
+
+/*
+ * NOTE: both conf_read() and conf_write() may set HAE_3 when needing
+ *       to do type1 access. This is protected by the use of spinlock IRQ
+ *       primitives in the wrapper functions pci_{read,write}_config_*()
+ *       defined in drivers/pci/pci.c.
+ */
+static unsigned int
+conf_read(unsigned long addr, unsigned char type1)
+{
+	unsigned int value, cpu, taken;
+	unsigned long t2_cfg = 0;
+
+	cpu = smp_processor_id();
+
+	DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
+
+	/* If Type1 access, must set T2 CFG.  */
+	if (type1) {
+		t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
+		*(vulp)T2_HAE_3 = 0x40000000UL | t2_cfg;
+		mb();
+	}
+	mb();
+	draina();
+
+	mcheck_expected(cpu) = 1;
+	mcheck_taken(cpu) = 0;
+	t2_mcheck_any_expected |= (1 << cpu);
+	mb();
+
+	/* Access configuration space. */
+	value = *(vuip)addr;
+	mb();
+	mb();  /* magic */
+
+	/* Wait for possible mcheck. Also, this lets other CPUs clear
+	   their mchecks as well, as they can reliably tell when
+	   another CPU is in the midst of handling a real mcheck via
+	   the "taken" function. */
+	udelay(100);
+
+	if ((taken = mcheck_taken(cpu))) {
+		mcheck_taken(cpu) = 0;
+		t2_mcheck_last_taken |= (1 << cpu);
+		value = 0xffffffffU;
+		mb();
+	}
+	mcheck_expected(cpu) = 0;
+	t2_mcheck_any_expected = 0;
+	mb();
+
+	/* If Type1 access, must reset T2 CFG so normal IO space ops work.  */
+	if (type1) {
+		*(vulp)T2_HAE_3 = t2_cfg;
+		mb();
+	}
+
+	return value;
+}
+
+static void
+conf_write(unsigned long addr, unsigned int value, unsigned char type1)
+{
+	unsigned int cpu, taken;
+	unsigned long t2_cfg = 0;
+
+	cpu = smp_processor_id();
+
+	/* If Type1 access, must set T2 CFG.  */
+	if (type1) {
+		t2_cfg = *(vulp)T2_HAE_3 & ~0xc0000000UL;
+		*(vulp)T2_HAE_3 = t2_cfg | 0x40000000UL;
+		mb();
+	}
+	mb();
+	draina();
+
+	mcheck_expected(cpu) = 1;
+	mcheck_taken(cpu) = 0;
+	t2_mcheck_any_expected |= (1 << cpu);
+	mb();
+
+	/* Access configuration space.  */
+	*(vuip)addr = value;
+	mb();
+	mb();  /* magic */
+
+	/* Wait for possible mcheck. Also, this lets other CPUs clear
+	   their mchecks as well, as they can reliably tell when
+	   this CPU is in the midst of handling a real mcheck via
+	   the "taken" function. */
+	udelay(100);
+
+	if ((taken = mcheck_taken(cpu))) {
+		mcheck_taken(cpu) = 0;
+		t2_mcheck_last_taken |= (1 << cpu);
+		mb();
+	}
+	mcheck_expected(cpu) = 0;
+	t2_mcheck_any_expected = 0;
+	mb();
+
+	/* If Type1 access, must reset T2 CFG so normal IO space ops work.  */
+	if (type1) {
+		*(vulp)T2_HAE_3 = t2_cfg;
+		mb();
+	}
+}
+
+static int
+t2_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+	       int size, u32 *value)
+{
+	unsigned long addr, pci_addr;
+	unsigned char type1;
+	int shift;
+	long mask;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	shift = (where & 3) * 8;
+	addr = (pci_addr << 5) + mask + T2_CONF;
+	*value = conf_read(addr, type1) >> (shift);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int 
+t2_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
+		u32 value)
+{
+	unsigned long addr, pci_addr;
+	unsigned char type1;
+	long mask;
+
+	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	mask = (size - 1) * 8;
+	addr = (pci_addr << 5) + mask + T2_CONF;
+	conf_write(addr, value << ((where & 3) * 8), type1);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops t2_pci_ops = 
+{
+	.read =		t2_read_config,
+	.write =	t2_write_config,
+};
+
+static void __init
+t2_direct_map_window1(unsigned long base, unsigned long length)
+{
+	unsigned long temp;
+
+	__direct_map_base = base;
+	__direct_map_size = length;
+
+	temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
+	*(vulp)T2_WBASE1 = temp | 0x80000UL; /* OR in ENABLE bit */
+	temp = (length - 1) & 0xfff00000UL;
+	*(vulp)T2_WMASK1 = temp;
+	*(vulp)T2_TBASE1 = 0;
+
+#if DEBUG_PRINT_FINAL_SETTINGS
+	printk("%s: setting WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
+	       __func__, *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
+#endif
+}
+
+static void __init
+t2_sg_map_window2(struct pci_controller *hose,
+		  unsigned long base,
+		  unsigned long length)
+{
+	unsigned long temp;
+
+	/* Note we can only do 1 SG window, as the other is for direct, so
+	   do an ISA SG area, especially for the floppy. */
+	hose->sg_isa = iommu_arena_new(hose, base, length, SMP_CACHE_BYTES);
+	hose->sg_pci = NULL;
+
+	temp = (base & 0xfff00000UL) | ((base + length - 1) >> 20);
+	*(vulp)T2_WBASE2 = temp | 0xc0000UL; /* OR in ENABLE/SG bits */
+	temp = (length - 1) & 0xfff00000UL;
+	*(vulp)T2_WMASK2 = temp;
+	*(vulp)T2_TBASE2 = virt_to_phys(hose->sg_isa->ptes) >> 1;
+	mb();
+
+	t2_pci_tbi(hose, 0, -1); /* flush TLB all */
+
+#if DEBUG_PRINT_FINAL_SETTINGS
+	printk("%s: setting WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
+	       __func__, *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
+#endif
+}
+
+static void __init
+t2_save_configuration(void)
+{
+#if DEBUG_PRINT_INITIAL_SETTINGS
+	printk("%s: HAE_1 was 0x%lx\n", __func__, srm_hae); /* HW is 0 */
+	printk("%s: HAE_2 was 0x%lx\n", __func__, *(vulp)T2_HAE_2);
+	printk("%s: HAE_3 was 0x%lx\n", __func__, *(vulp)T2_HAE_3);
+	printk("%s: HAE_4 was 0x%lx\n", __func__, *(vulp)T2_HAE_4);
+	printk("%s: HBASE was 0x%lx\n", __func__, *(vulp)T2_HBASE);
+
+	printk("%s: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", __func__,
+	       *(vulp)T2_WBASE1, *(vulp)T2_WMASK1, *(vulp)T2_TBASE1);
+	printk("%s: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", __func__,
+	       *(vulp)T2_WBASE2, *(vulp)T2_WMASK2, *(vulp)T2_TBASE2);
+#endif
+
+	/*
+	 * Save the DMA Window registers.
+	 */
+	t2_saved_config.window[0].wbase = *(vulp)T2_WBASE1;
+	t2_saved_config.window[0].wmask = *(vulp)T2_WMASK1;
+	t2_saved_config.window[0].tbase = *(vulp)T2_TBASE1;
+	t2_saved_config.window[1].wbase = *(vulp)T2_WBASE2;
+	t2_saved_config.window[1].wmask = *(vulp)T2_WMASK2;
+	t2_saved_config.window[1].tbase = *(vulp)T2_TBASE2;
+
+	t2_saved_config.hae_1 = srm_hae; /* HW is already set to 0 */
+	t2_saved_config.hae_2 = *(vulp)T2_HAE_2;
+	t2_saved_config.hae_3 = *(vulp)T2_HAE_3;
+	t2_saved_config.hae_4 = *(vulp)T2_HAE_4;
+	t2_saved_config.hbase = *(vulp)T2_HBASE;
+}
+
+void __init
+t2_init_arch(void)
+{
+	struct pci_controller *hose;
+	struct resource *hae_mem;
+	unsigned long temp;
+	unsigned int i;
+
+	for (i = 0; i < NR_CPUS; i++) {
+		mcheck_expected(i) = 0;
+		mcheck_taken(i) = 0;
+	}
+	t2_mcheck_any_expected = 0;
+	t2_mcheck_last_taken = 0;
+
+	/* Enable scatter/gather TLB use.  */
+	temp = *(vulp)T2_IOCSR;
+	if (!(temp & (0x1UL << 26))) {
+		printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n",
+		       temp);
+		*(vulp)T2_IOCSR = temp | (0x1UL << 26);
+		mb();	
+		*(vulp)T2_IOCSR; /* read it back to make sure */
+	}
+
+	t2_save_configuration();
+
+	/*
+	 * Create our single hose.
+	 */
+	pci_isa_hose = hose = alloc_pci_controller();
+	hose->io_space = &ioport_resource;
+	hae_mem = alloc_resource();
+	hae_mem->start = 0;
+	hae_mem->end = T2_MEM_R1_MASK;
+	hae_mem->name = pci_hae0_name;
+	if (request_resource(&iomem_resource, hae_mem) < 0)
+		printk(KERN_ERR "Failed to request HAE_MEM\n");
+	hose->mem_space = hae_mem;
+	hose->index = 0;
+
+	hose->sparse_mem_base = T2_SPARSE_MEM - IDENT_ADDR;
+	hose->dense_mem_base = T2_DENSE_MEM - IDENT_ADDR;
+	hose->sparse_io_base = T2_IO - IDENT_ADDR;
+	hose->dense_io_base = 0;
+
+	/*
+	 * Set up the PCI->physical memory translation windows.
+	 *
+	 * Window 1 is direct mapped.
+	 * Window 2 is scatter/gather (for ISA).
+	 */
+
+	t2_direct_map_window1(T2_DIRECTMAP_START, T2_DIRECTMAP_LENGTH);
+
+	/* Always make an ISA DMA window. */
+	t2_sg_map_window2(hose, T2_ISA_SG_START, T2_ISA_SG_LENGTH);
+
+	*(vulp)T2_HBASE = 0x0; /* Disable HOLES. */
+
+	/* Zero HAE.  */
+	*(vulp)T2_HAE_1 = 0; mb(); /* Sparse MEM HAE */
+	*(vulp)T2_HAE_2 = 0; mb(); /* Sparse I/O HAE */
+	*(vulp)T2_HAE_3 = 0; mb(); /* Config Space HAE */
+
+	/*
+	 * We also now zero out HAE_4, the dense memory HAE, so that
+	 * we need not account for its "offset" when accessing dense
+	 * memory resources which we allocated in our normal way. This
+	 * HAE would need to stay untouched were we to keep the SRM
+	 * resource settings.
+	 *
+	 * Thus we can now run standard X servers on SABLE/LYNX. :-)
+	 */
+	*(vulp)T2_HAE_4 = 0; mb();
+}
+
+void
+t2_kill_arch(int mode)
+{
+	/*
+	 * Restore the DMA Window registers.
+	 */
+	*(vulp)T2_WBASE1 = t2_saved_config.window[0].wbase;
+	*(vulp)T2_WMASK1 = t2_saved_config.window[0].wmask;
+	*(vulp)T2_TBASE1 = t2_saved_config.window[0].tbase;
+	*(vulp)T2_WBASE2 = t2_saved_config.window[1].wbase;
+	*(vulp)T2_WMASK2 = t2_saved_config.window[1].wmask;
+	*(vulp)T2_TBASE2 = t2_saved_config.window[1].tbase;
+	mb();
+
+	*(vulp)T2_HAE_1 = srm_hae;
+	*(vulp)T2_HAE_2 = t2_saved_config.hae_2;
+	*(vulp)T2_HAE_3 = t2_saved_config.hae_3;
+	*(vulp)T2_HAE_4 = t2_saved_config.hae_4;
+	*(vulp)T2_HBASE = t2_saved_config.hbase;
+	mb();
+	*(vulp)T2_HBASE; /* READ it back to ensure WRITE occurred. */
+}
+
+void
+t2_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
+{
+	unsigned long t2_iocsr;
+
+	t2_iocsr = *(vulp)T2_IOCSR;
+
+	/* set the TLB Clear bit */
+	*(vulp)T2_IOCSR = t2_iocsr | (0x1UL << 28);
+	mb();
+	*(vulp)T2_IOCSR; /* read it back to make sure */
+
+	/* clear the TLB Clear bit */
+	*(vulp)T2_IOCSR = t2_iocsr & ~(0x1UL << 28);
+	mb();
+	*(vulp)T2_IOCSR; /* read it back to make sure */
+}
+
+#define SIC_SEIC (1UL << 33)    /* System Event Clear */
+
+static void
+t2_clear_errors(int cpu)
+{
+	struct sable_cpu_csr *cpu_regs;
+
+	cpu_regs = (struct sable_cpu_csr *)T2_CPUn_BASE(cpu);
+		
+	cpu_regs->sic &= ~SIC_SEIC;
+
+	/* Clear CPU errors.  */
+	cpu_regs->bcce |= cpu_regs->bcce;
+	cpu_regs->cbe  |= cpu_regs->cbe;
+	cpu_regs->bcue |= cpu_regs->bcue;
+	cpu_regs->dter |= cpu_regs->dter;
+
+	*(vulp)T2_CERR1 |= *(vulp)T2_CERR1;
+	*(vulp)T2_PERR1 |= *(vulp)T2_PERR1;
+
+	mb();
+	mb();  /* magic */
+}
+
+/*
+ * SABLE seems to have a "broadcast" style machine check, in that all
+ * CPUs receive it. And, the issuing CPU, in the case of PCI Config
+ * space read/write faults, will also receive a second mcheck, upon
+ * lowering IPL during completion processing in pci_read_config_byte()
+ * et al.
+ *
+ * Hence all the taken/expected/any_expected/last_taken stuff...
+ */
+void
+t2_machine_check(unsigned long vector, unsigned long la_ptr)
+{
+	int cpu = smp_processor_id();
+#ifdef CONFIG_VERBOSE_MCHECK
+	struct el_common *mchk_header = (struct el_common *)la_ptr;
+#endif
+
+	/* Clear the error before any reporting.  */
+	mb();
+	mb();  /* magic */
+	draina();
+	t2_clear_errors(cpu);
+
+	/* This should not actually be done until the logout frame is
+	   examined, but, since we don't do that, go on and do this... */
+	wrmces(0x7);
+	mb();
+
+	/* Now, do testing for the anomalous conditions. */
+	if (!mcheck_expected(cpu) && t2_mcheck_any_expected) {
+		/*
+		 * FUNKY: Received mcheck on a CPU and not
+		 * expecting it, but another CPU is expecting one.
+		 *
+		 * Just dismiss it for now on this CPU...
+		 */
+#ifdef CONFIG_VERBOSE_MCHECK
+		if (alpha_verbose_mcheck > 1) {
+			printk("t2_machine_check(cpu%d): any_expected 0x%x -"
+			       " (assumed) spurious -"
+			       " code 0x%x\n", cpu, t2_mcheck_any_expected,
+			       (unsigned int)mchk_header->code);
+		}
+#endif
+		return;
+	}
+
+	if (!mcheck_expected(cpu) && !t2_mcheck_any_expected) {
+		if (t2_mcheck_last_taken & (1 << cpu)) {
+#ifdef CONFIG_VERBOSE_MCHECK
+		    if (alpha_verbose_mcheck > 1) {
+			printk("t2_machine_check(cpu%d): last_taken 0x%x - "
+			       "unexpected mcheck - code 0x%x\n",
+			       cpu, t2_mcheck_last_taken,
+			       (unsigned int)mchk_header->code);
+		    }
+#endif
+		    t2_mcheck_last_taken = 0;
+		    mb();
+		    return;
+		} else {
+			t2_mcheck_last_taken = 0;
+			mb();
+		}
+	}
+
+#ifdef CONFIG_VERBOSE_MCHECK
+	if (alpha_verbose_mcheck > 1) {
+		printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
+		       "any_expected 0x%x - code 0x%x\n",
+		       (mcheck_expected(cpu) ? "EX" : "UN"), cpu,
+		       t2_mcheck_last_taken, t2_mcheck_any_expected,
+		       (unsigned int)mchk_header->code);
+	}
+#endif
+
+	process_mcheck_info(vector, la_ptr, "T2", mcheck_expected(cpu));
+}