Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 476 insertions, 0 deletions

diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
new file mode 100644
index 000000000..64fbfb076
--- /dev/null
+++ b/arch/alpha/kernel/pci.c
@@ -0,0 +1,476 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	linux/arch/alpha/kernel/pci.c
+ *
+ * Extruded from code written by
+ *	Dave Rusling (david.rusling@reo.mts.dec.com)
+ *	David Mosberger (davidm@cs.arizona.edu)
+ */
+
+/* 2.3.x PCI/resources, 1999 Andrea Arcangeli <andrea@suse.de> */
+
+/*
+ * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
+ *	     PCI-PCI bridges cleanup
+ */
+#include <linux/string.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/module.h>
+#include <linux/cache.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+#include <asm/machvec.h>
+
+#include "proto.h"
+#include "pci_impl.h"
+
+
+/*
+ * Some string constants used by the various core logics. 
+ */
+
+const char *const pci_io_names[] = {
+  "PCI IO bus 0", "PCI IO bus 1", "PCI IO bus 2", "PCI IO bus 3",
+  "PCI IO bus 4", "PCI IO bus 5", "PCI IO bus 6", "PCI IO bus 7"
+};
+
+const char *const pci_mem_names[] = {
+  "PCI mem bus 0", "PCI mem bus 1", "PCI mem bus 2", "PCI mem bus 3",
+  "PCI mem bus 4", "PCI mem bus 5", "PCI mem bus 6", "PCI mem bus 7"
+};
+
+const char pci_hae0_name[] = "HAE0";
+
+/*
+ * If PCI_PROBE_ONLY in pci_flags is set, we don't change any PCI resource
+ * assignments.
+ */
+
+/*
+ * The PCI controller list.
+ */
+
+struct pci_controller *hose_head, **hose_tail = &hose_head;
+struct pci_controller *pci_isa_hose;
+
+/*
+ * Quirks.
+ */
+
+static void quirk_isa_bridge(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_ISA << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
+
+static void quirk_cypress(struct pci_dev *dev)
+{
+	/* The Notorious Cy82C693 chip.  */
+
+	/* The generic legacy mode IDE fixup in drivers/pci/probe.c
+	   doesn't work correctly with the Cypress IDE controller as
+	   it has non-standard register layout.  Fix that.  */
+	if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+		dev->resource[2].start = dev->resource[3].start = 0;
+		dev->resource[2].end = dev->resource[3].end = 0;
+		dev->resource[2].flags = dev->resource[3].flags = 0;
+		if (PCI_FUNC(dev->devfn) == 2) {
+			dev->resource[0].start = 0x170;
+			dev->resource[0].end = 0x177;
+			dev->resource[1].start = 0x376;
+			dev->resource[1].end = 0x376;
+		}
+	}
+
+	/* The Cypress bridge responds on the PCI bus in the address range
+	   0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
+	   way to turn this off.  The bridge also supports several extended
+	   BIOS ranges (disabled after power-up), and some consoles do turn
+	   them on.  So if we use a large direct-map window, or a large SG
+	   window, we must avoid the entire 0xfff00000-0xffffffff region.  */
+	if (dev->class >> 8 == PCI_CLASS_BRIDGE_ISA) {
+		if (__direct_map_base + __direct_map_size >= 0xfff00000UL)
+			__direct_map_size = 0xfff00000UL - __direct_map_base;
+		else {
+			struct pci_controller *hose = dev->sysdata;
+			struct pci_iommu_arena *pci = hose->sg_pci;
+			if (pci && pci->dma_base + pci->size >= 0xfff00000UL)
+				pci->size = 0xfff00000UL - pci->dma_base;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
+
+/* Called for each device after PCI setup is done. */
+static void pcibios_fixup_final(struct pci_dev *dev)
+{
+	unsigned int class = dev->class >> 8;
+
+	if (class == PCI_CLASS_BRIDGE_ISA || class == PCI_CLASS_BRIDGE_EISA) {
+		dev->dma_mask = MAX_ISA_DMA_ADDRESS - 1;
+		isa_bridge = dev;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_final);
+
+/* Just declaring that the power-of-ten prefixes are actually the
+   power-of-two ones doesn't make it true :) */
+#define KB			1024
+#define MB			(1024*KB)
+#define GB			(1024*MB)
+
+resource_size_t
+pcibios_align_resource(void *data, const struct resource *res,
+		       resource_size_t size, resource_size_t align)
+{
+	struct pci_dev *dev = data;
+	struct pci_controller *hose = dev->sysdata;
+	unsigned long alignto;
+	resource_size_t start = res->start;
+
+	if (res->flags & IORESOURCE_IO) {
+		/* Make sure we start at our min on all hoses */
+		if (start - hose->io_space->start < PCIBIOS_MIN_IO)
+			start = PCIBIOS_MIN_IO + hose->io_space->start;
+
+		/*
+		 * Put everything into 0x00-0xff region modulo 0x400
+		 */
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
+	}
+	else if	(res->flags & IORESOURCE_MEM) {
+		/* Make sure we start at our min on all hoses */
+		if (start - hose->mem_space->start < PCIBIOS_MIN_MEM)
+			start = PCIBIOS_MIN_MEM + hose->mem_space->start;
+
+		/*
+		 * The following holds at least for the Low Cost
+		 * Alpha implementation of the PCI interface:
+		 *
+		 * In sparse memory address space, the first
+		 * octant (16MB) of every 128MB segment is
+		 * aliased to the very first 16 MB of the
+		 * address space (i.e., it aliases the ISA
+		 * memory address space).  Thus, we try to
+		 * avoid allocating PCI devices in that range.
+		 * Can be allocated in 2nd-7th octant only.
+		 * Devices that need more than 112MB of
+		 * address space must be accessed through
+		 * dense memory space only!
+		 */
+
+		/* Align to multiple of size of minimum base.  */
+		alignto = max_t(resource_size_t, 0x1000, align);
+		start = ALIGN(start, alignto);
+		if (hose->sparse_mem_base && size <= 7 * 16*MB) {
+			if (((start / (16*MB)) & 0x7) == 0) {
+				start &= ~(128*MB - 1);
+				start += 16*MB;
+				start  = ALIGN(start, alignto);
+			}
+			if (start/(128*MB) != (start + size - 1)/(128*MB)) {
+				start &= ~(128*MB - 1);
+				start += (128 + 16)*MB;
+				start  = ALIGN(start, alignto);
+			}
+		}
+	}
+
+	return start;
+}
+#undef KB
+#undef MB
+#undef GB
+
+static int __init
+pcibios_init(void)
+{
+	if (alpha_mv.init_pci)
+		alpha_mv.init_pci();
+	return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+#ifdef ALPHA_RESTORE_SRM_SETUP
+/* Store PCI device configuration left by SRM here. */
+struct pdev_srm_saved_conf
+{
+	struct pdev_srm_saved_conf *next;
+	struct pci_dev *dev;
+};
+
+static struct pdev_srm_saved_conf *srm_saved_configs;
+
+static void pdev_save_srm_config(struct pci_dev *dev)
+{
+	struct pdev_srm_saved_conf *tmp;
+	static int printed = 0;
+
+	if (!alpha_using_srm || pci_has_flag(PCI_PROBE_ONLY))
+		return;
+
+	if (!printed) {
+		printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
+		printed = 1;
+	}
+
+	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+	if (!tmp) {
+		printk(KERN_ERR "%s: kmalloc() failed!\n", __func__);
+		return;
+	}
+	tmp->next = srm_saved_configs;
+	tmp->dev = dev;
+
+	pci_save_state(dev);
+
+	srm_saved_configs = tmp;
+}
+
+void
+pci_restore_srm_config(void)
+{
+	struct pdev_srm_saved_conf *tmp;
+
+	/* No need to restore if probed only. */
+	if (pci_has_flag(PCI_PROBE_ONLY))
+		return;
+
+	/* Restore SRM config. */
+	for (tmp = srm_saved_configs; tmp; tmp = tmp->next) {
+		pci_restore_state(tmp->dev);
+	}
+}
+#else
+#define pdev_save_srm_config(dev)	do {} while (0)
+#endif
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+
+	if (pci_has_flag(PCI_PROBE_ONLY) && dev &&
+	    (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_read_bridge_bases(bus);
+	}
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		pdev_save_srm_config(dev);
+	}
+}
+
+/*
+ *  If we set up a device for bus mastering, we need to check the latency
+ *  timer as certain firmware forgets to set it properly, as seen
+ *  on SX164 and LX164 with SRM.
+ */
+void
+pcibios_set_master(struct pci_dev *dev)
+{
+	u8 lat;
+	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
+	if (lat >= 16) return;
+	printk("PCI: Setting latency timer of device %s to 64\n",
+							pci_name(dev));
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
+}
+
+void __init
+pcibios_claim_one_bus(struct pci_bus *b)
+{
+	struct pci_dev *dev;
+	struct pci_bus *child_bus;
+
+	list_for_each_entry(dev, &b->devices, bus_list) {
+		int i;
+
+		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+			struct resource *r = &dev->resource[i];
+
+			if (r->parent || !r->start || !r->flags)
+				continue;
+			if (pci_has_flag(PCI_PROBE_ONLY) ||
+			    (r->flags & IORESOURCE_PCI_FIXED)) {
+				if (pci_claim_resource(dev, i) == 0)
+					continue;
+
+				pci_claim_bridge_resource(dev, i);
+			}
+		}
+	}
+
+	list_for_each_entry(child_bus, &b->children, node)
+		pcibios_claim_one_bus(child_bus);
+}
+
+static void __init
+pcibios_claim_console_setup(void)
+{
+	struct pci_bus *b;
+
+	list_for_each_entry(b, &pci_root_buses, node)
+		pcibios_claim_one_bus(b);
+}
+
+void __init
+common_init_pci(void)
+{
+	struct pci_controller *hose;
+	struct list_head resources;
+	struct pci_host_bridge *bridge;
+	struct pci_bus *bus;
+	int ret, next_busno;
+	int need_domain_info = 0;
+	u32 pci_mem_end;
+	u32 sg_base;
+	unsigned long end;
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+		sg_base = hose->sg_pci ? hose->sg_pci->dma_base : ~0;
+
+		/* Adjust hose mem_space limit to prevent PCI allocations
+		   in the iommu windows. */
+		pci_mem_end = min((u32)__direct_map_base, sg_base) - 1;
+		end = hose->mem_space->start + pci_mem_end;
+		if (hose->mem_space->end > end)
+			hose->mem_space->end = end;
+
+		INIT_LIST_HEAD(&resources);
+		pci_add_resource_offset(&resources, hose->io_space,
+					hose->io_space->start);
+		pci_add_resource_offset(&resources, hose->mem_space,
+					hose->mem_space->start);
+
+		bridge = pci_alloc_host_bridge(0);
+		if (!bridge)
+			continue;
+
+		list_splice_init(&resources, &bridge->windows);
+		bridge->dev.parent = NULL;
+		bridge->sysdata = hose;
+		bridge->busnr = next_busno;
+		bridge->ops = alpha_mv.pci_ops;
+		bridge->swizzle_irq = alpha_mv.pci_swizzle;
+		bridge->map_irq = alpha_mv.pci_map_irq;
+
+		ret = pci_scan_root_bus_bridge(bridge);
+		if (ret) {
+			pci_free_host_bridge(bridge);
+			continue;
+		}
+
+		bus = hose->bus = bridge->bus;
+		hose->need_domain_info = need_domain_info;
+		next_busno = bus->busn_res.end + 1;
+		/* Don't allow 8-bit bus number overflow inside the hose -
+		   reserve some space for bridges. */ 
+		if (next_busno > 224) {
+			next_busno = 0;
+			need_domain_info = 1;
+		}
+	}
+
+	pcibios_claim_console_setup();
+
+	pci_assign_unassigned_resources();
+	for (hose = hose_head; hose; hose = hose->next) {
+		bus = hose->bus;
+		if (bus)
+			pci_bus_add_devices(bus);
+	}
+}
+
+struct pci_controller * __init
+alloc_pci_controller(void)
+{
+	struct pci_controller *hose;
+
+	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
+	if (!hose)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(*hose));
+
+	*hose_tail = hose;
+	hose_tail = &hose->next;
+
+	return hose;
+}
+
+struct resource * __init
+alloc_resource(void)
+{
+	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
+
+	if (!ptr)
+		panic("%s: Failed to allocate %zu bytes\n", __func__,
+		      sizeof(struct resource));
+
+	return ptr;
+}
+
+
+/* Provide information on locations of various I/O regions in physical
+   memory.  Do this on a per-card basis so that we choose the right hose.  */
+
+SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
+		unsigned long, dfn)
+{
+	struct pci_controller *hose;
+	struct pci_dev *dev;
+
+	/* from hose or from bus.devfn */
+	if (which & IOBASE_FROM_HOSE) {
+		for(hose = hose_head; hose; hose = hose->next) 
+			if (hose->index == bus) break;
+		if (!hose) return -ENODEV;
+	} else {
+		/* Special hook for ISA access.  */
+		if (bus == 0 && dfn == 0) {
+			hose = pci_isa_hose;
+		} else {
+			dev = pci_get_domain_bus_and_slot(0, bus, dfn);
+			if (!dev)
+				return -ENODEV;
+			hose = dev->sysdata;
+			pci_dev_put(dev);
+		}
+	}
+
+	switch (which & ~IOBASE_FROM_HOSE) {
+	case IOBASE_HOSE:
+		return hose->index;
+	case IOBASE_SPARSE_MEM:
+		return hose->sparse_mem_base;
+	case IOBASE_DENSE_MEM:
+		return hose->dense_mem_base;
+	case IOBASE_SPARSE_IO:
+		return hose->sparse_io_base;
+	case IOBASE_DENSE_IO:
+		return hose->dense_io_base;
+	case IOBASE_ROOT_BUS:
+		return hose->bus->number;
+	}
+
+	return -EOPNOTSUPP;
+}
+
+/* Destroy an __iomem token.  Not copied from lib/iomap.c.  */
+
+void pci_iounmap(struct pci_dev *dev, void __iomem * addr)
+{
+	if (__is_mmio(addr))
+		iounmap(addr);
+}
+
+EXPORT_SYMBOL(pci_iounmap);
+
+/* FIXME: Some boxes have multiple ISA bridges! */
+struct pci_dev *isa_bridge;
+EXPORT_SYMBOL(isa_bridge);