Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 458 insertions, 0 deletions

diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
new file mode 100644
index 000000000..4d01c392a
--- /dev/null
+++ b/arch/alpha/kernel/time.c
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  linux/arch/alpha/kernel/time.c
+ *
+ *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
+ *
+ * This file contains the clocksource time handling.
+ * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
+ *		"A Kernel Model for Precision Timekeeping" by Dave Mills
+ * 1997-01-09    Adrian Sun
+ *      use interval timer if CONFIG_RTC=y
+ * 1997-10-29    John Bowman (bowman@math.ualberta.ca)
+ *      fixed tick loss calculation in timer_interrupt
+ *      (round system clock to nearest tick instead of truncating)
+ *      fixed algorithm in time_init for getting time from CMOS clock
+ * 1999-04-16	Thorsten Kranzkowski (dl8bcu@gmx.net)
+ *	fixed algorithm in do_gettimeofday() for calculating the precise time
+ *	from processor cycle counter (now taking lost_ticks into account)
+ * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
+ *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
+ */
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/bcd.h>
+#include <linux/profile.h>
+#include <linux/irq_work.h>
+
+#include <linux/uaccess.h>
+#include <asm/io.h>
+#include <asm/hwrpb.h>
+
+#include <linux/mc146818rtc.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include "proto.h"
+#include "irq_impl.h"
+
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+unsigned long est_cycle_freq;
+
+#ifdef CONFIG_IRQ_WORK
+
+DEFINE_PER_CPU(u8, irq_work_pending);
+
+#define set_irq_work_pending_flag()  __this_cpu_write(irq_work_pending, 1)
+#define test_irq_work_pending()      __this_cpu_read(irq_work_pending)
+#define clear_irq_work_pending()     __this_cpu_write(irq_work_pending, 0)
+
+void arch_irq_work_raise(void)
+{
+	set_irq_work_pending_flag();
+}
+
+#else  /* CONFIG_IRQ_WORK */
+
+#define test_irq_work_pending()      0
+#define clear_irq_work_pending()
+
+#endif /* CONFIG_IRQ_WORK */
+
+
+static inline __u32 rpcc(void)
+{
+	return __builtin_alpha_rpcc();
+}
+
+
+
+/*
+ * The RTC as a clock_event_device primitive.
+ */
+
+static DEFINE_PER_CPU(struct clock_event_device, cpu_ce);
+
+irqreturn_t
+rtc_timer_interrupt(int irq, void *dev)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	/* Don't run the hook for UNUSED or SHUTDOWN.  */
+	if (likely(clockevent_state_periodic(ce)))
+		ce->event_handler(ce);
+
+	if (test_irq_work_pending()) {
+		clear_irq_work_pending();
+		irq_work_run();
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int
+rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+	/* This hook is for oneshot mode, which we don't support.  */
+	return -EINVAL;
+}
+
+static void __init
+init_rtc_clockevent(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	*ce = (struct clock_event_device){
+		.name = "rtc",
+		.features = CLOCK_EVT_FEAT_PERIODIC,
+		.rating = 100,
+		.cpumask = cpumask_of(cpu),
+		.set_next_event = rtc_ce_set_next_event,
+	};
+
+	clockevents_config_and_register(ce, CONFIG_HZ, 0, 0);
+}
+
+
+/*
+ * The QEMU clock as a clocksource primitive.
+ */
+
+static u64
+qemu_cs_read(struct clocksource *cs)
+{
+	return qemu_get_vmtime();
+}
+
+static struct clocksource qemu_cs = {
+	.name                   = "qemu",
+	.rating                 = 400,
+	.read                   = qemu_cs_read,
+	.mask                   = CLOCKSOURCE_MASK(64),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS,
+	.max_idle_ns		= LONG_MAX
+};
+
+
+/*
+ * The QEMU alarm as a clock_event_device primitive.
+ */
+
+static int qemu_ce_shutdown(struct clock_event_device *ce)
+{
+	/* The mode member of CE is updated for us in generic code.
+	   Just make sure that the event is disabled.  */
+	qemu_set_alarm_abs(0);
+	return 0;
+}
+
+static int
+qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
+{
+	qemu_set_alarm_rel(evt);
+	return 0;
+}
+
+static irqreturn_t
+qemu_timer_interrupt(int irq, void *dev)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	ce->event_handler(ce);
+	return IRQ_HANDLED;
+}
+
+static void __init
+init_qemu_clockevent(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
+
+	*ce = (struct clock_event_device){
+		.name = "qemu",
+		.features = CLOCK_EVT_FEAT_ONESHOT,
+		.rating = 400,
+		.cpumask = cpumask_of(cpu),
+		.set_state_shutdown = qemu_ce_shutdown,
+		.set_state_oneshot = qemu_ce_shutdown,
+		.tick_resume = qemu_ce_shutdown,
+		.set_next_event = qemu_ce_set_next_event,
+	};
+
+	clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX);
+}
+
+
+void __init
+common_init_rtc(void)
+{
+	unsigned char x, sel = 0;
+
+	/* Reset periodic interrupt frequency.  */
+#if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
+ 	x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
+	/* Test includes known working values on various platforms
+	   where 0x26 is wrong; we refuse to change those. */
+ 	if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
+		sel = RTC_REF_CLCK_32KHZ + 6;
+	}
+#elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32
+	sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ);
+#else
+# error "Unknown HZ from arch/alpha/Kconfig"
+#endif
+	if (sel) {
+		printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
+		       CONFIG_HZ, sel);
+		CMOS_WRITE(sel, RTC_FREQ_SELECT);
+ 	}
+
+	/* Turn on periodic interrupts.  */
+	x = CMOS_READ(RTC_CONTROL);
+	if (!(x & RTC_PIE)) {
+		printk("Turning on RTC interrupts.\n");
+		x |= RTC_PIE;
+		x &= ~(RTC_AIE | RTC_UIE);
+		CMOS_WRITE(x, RTC_CONTROL);
+	}
+	(void) CMOS_READ(RTC_INTR_FLAGS);
+
+	outb(0x36, 0x43);	/* pit counter 0: system timer */
+	outb(0x00, 0x40);
+	outb(0x00, 0x40);
+
+	outb(0xb6, 0x43);	/* pit counter 2: speaker */
+	outb(0x31, 0x42);
+	outb(0x13, 0x42);
+
+	init_rtc_irq(NULL);
+}
+
+
+#ifndef CONFIG_ALPHA_WTINT
+/*
+ * The RPCC as a clocksource primitive.
+ *
+ * While we have free-running timecounters running on all CPUs, and we make
+ * a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter
+ * with the wall clock, that initialization isn't kept up-to-date across
+ * different time counters in SMP mode.  Therefore we can only use this
+ * method when there's only one CPU enabled.
+ *
+ * When using the WTINT PALcall, the RPCC may shift to a lower frequency,
+ * or stop altogether, while waiting for the interrupt.  Therefore we cannot
+ * use this method when WTINT is in use.
+ */
+
+static u64 read_rpcc(struct clocksource *cs)
+{
+	return rpcc();
+}
+
+static struct clocksource clocksource_rpcc = {
+	.name                   = "rpcc",
+	.rating                 = 300,
+	.read                   = read_rpcc,
+	.mask                   = CLOCKSOURCE_MASK(32),
+	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
+};
+#endif /* ALPHA_WTINT */
+
+
+/* Validate a computed cycle counter result against the known bounds for
+   the given processor core.  There's too much brokenness in the way of
+   timing hardware for any one method to work everywhere.  :-(
+
+   Return 0 if the result cannot be trusted, otherwise return the argument.  */
+
+static unsigned long __init
+validate_cc_value(unsigned long cc)
+{
+	static struct bounds {
+		unsigned int min, max;
+	} cpu_hz[] __initdata = {
+		[EV3_CPU]    = {   50000000,  200000000 },	/* guess */
+		[EV4_CPU]    = {  100000000,  300000000 },
+		[LCA4_CPU]   = {  100000000,  300000000 },	/* guess */
+		[EV45_CPU]   = {  200000000,  300000000 },
+		[EV5_CPU]    = {  250000000,  433000000 },
+		[EV56_CPU]   = {  333000000,  667000000 },
+		[PCA56_CPU]  = {  400000000,  600000000 },	/* guess */
+		[PCA57_CPU]  = {  500000000,  600000000 },	/* guess */
+		[EV6_CPU]    = {  466000000,  600000000 },
+		[EV67_CPU]   = {  600000000,  750000000 },
+		[EV68AL_CPU] = {  750000000,  940000000 },
+		[EV68CB_CPU] = { 1000000000, 1333333333 },
+		/* None of the following are shipping as of 2001-11-01.  */
+		[EV68CX_CPU] = { 1000000000, 1700000000 },	/* guess */
+		[EV69_CPU]   = { 1000000000, 1700000000 },	/* guess */
+		[EV7_CPU]    = {  800000000, 1400000000 },	/* guess */
+		[EV79_CPU]   = { 1000000000, 2000000000 },	/* guess */
+	};
+
+	/* Allow for some drift in the crystal.  10MHz is more than enough.  */
+	const unsigned int deviation = 10000000;
+
+	struct percpu_struct *cpu;
+	unsigned int index;
+
+	cpu = (struct percpu_struct *)((char*)hwrpb + hwrpb->processor_offset);
+	index = cpu->type & 0xffffffff;
+
+	/* If index out of bounds, no way to validate.  */
+	if (index >= ARRAY_SIZE(cpu_hz))
+		return cc;
+
+	/* If index contains no data, no way to validate.  */
+	if (cpu_hz[index].max == 0)
+		return cc;
+
+	if (cc < cpu_hz[index].min - deviation
+	    || cc > cpu_hz[index].max + deviation)
+		return 0;
+
+	return cc;
+}
+
+
+/*
+ * Calibrate CPU clock using legacy 8254 timer/counter. Stolen from
+ * arch/i386/time.c.
+ */
+
+#define CALIBRATE_LATCH	0xffff
+#define TIMEOUT_COUNT	0x100000
+
+static unsigned long __init
+calibrate_cc_with_pit(void)
+{
+	int cc, count = 0;
+
+	/* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 */
+	outb(0xb0, 0x43);		/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
+
+	cc = rpcc();
+	do {
+		count++;
+	} while ((inb(0x61) & 0x20) == 0 && count < TIMEOUT_COUNT);
+	cc = rpcc() - cc;
+
+	/* Error: ECTCNEVERSET or ECPUTOOFAST.  */
+	if (count <= 1 || count == TIMEOUT_COUNT)
+		return 0;
+
+	return ((long)cc * PIT_TICK_RATE) / (CALIBRATE_LATCH + 1);
+}
+
+/* The Linux interpretation of the CMOS clock register contents:
+   When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+   RTC registers show the second which has precisely just started.
+   Let's hope other operating systems interpret the RTC the same way.  */
+
+static unsigned long __init
+rpcc_after_update_in_progress(void)
+{
+	do { } while (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP));
+	do { } while (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
+
+	return rpcc();
+}
+
+void __init
+time_init(void)
+{
+	unsigned int cc1, cc2;
+	unsigned long cycle_freq, tolerance;
+	long diff;
+
+	if (alpha_using_qemu) {
+		clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
+		init_qemu_clockevent();
+		init_rtc_irq(qemu_timer_interrupt);
+		return;
+	}
+
+	/* Calibrate CPU clock -- attempt #1.  */
+	if (!est_cycle_freq)
+		est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
+
+	cc1 = rpcc();
+
+	/* Calibrate CPU clock -- attempt #2.  */
+	if (!est_cycle_freq) {
+		cc1 = rpcc_after_update_in_progress();
+		cc2 = rpcc_after_update_in_progress();
+		est_cycle_freq = validate_cc_value(cc2 - cc1);
+		cc1 = cc2;
+	}
+
+	cycle_freq = hwrpb->cycle_freq;
+	if (est_cycle_freq) {
+		/* If the given value is within 250 PPM of what we calculated,
+		   accept it.  Otherwise, use what we found.  */
+		tolerance = cycle_freq / 4000;
+		diff = cycle_freq - est_cycle_freq;
+		if (diff < 0)
+			diff = -diff;
+		if ((unsigned long)diff > tolerance) {
+			cycle_freq = est_cycle_freq;
+			printk("HWRPB cycle frequency bogus.  "
+			       "Estimated %lu Hz\n", cycle_freq);
+		} else {
+			est_cycle_freq = 0;
+		}
+	} else if (! validate_cc_value (cycle_freq)) {
+		printk("HWRPB cycle frequency bogus, "
+		       "and unable to estimate a proper value!\n");
+	}
+
+	/* See above for restrictions on using clocksource_rpcc.  */
+#ifndef CONFIG_ALPHA_WTINT
+	if (hwrpb->nr_processors == 1)
+		clocksource_register_hz(&clocksource_rpcc, cycle_freq);
+#endif
+
+	/* Startup the timer source. */
+	alpha_mv.init_rtc();
+	init_rtc_clockevent();
+}
+
+/* Initialize the clock_event_device for secondary cpus.  */
+#ifdef CONFIG_SMP
+void __init
+init_clockevent(void)
+{
+	if (alpha_using_qemu)
+		init_qemu_clockevent();
+	else
+		init_rtc_clockevent();
+}
+#endif