Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 227 insertions, 0 deletions

diff --git a/arch/alpha/lib/ev6-copy_user.S b/arch/alpha/lib/ev6-copy_user.S
new file mode 100644
index 000000000..f3e433754
--- /dev/null
+++ b/arch/alpha/lib/ev6-copy_user.S
@@ -0,0 +1,227 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/lib/ev6-copy_user.S
+ *
+ * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
+ *
+ * Copy to/from user space, handling exceptions as we go..  This
+ * isn't exactly pretty.
+ *
+ * This is essentially the same as "memcpy()", but with a few twists.
+ * Notably, we have to make sure that $0 is always up-to-date and
+ * contains the right "bytes left to copy" value (and that it is updated
+ * only _after_ a successful copy). There is also some rather minor
+ * exception setup stuff..
+ *
+ * Much of the information about 21264 scheduling/coding comes from:
+ *	Compiler Writer's Guide for the Alpha 21264
+ *	abbreviated as 'CWG' in other comments here
+ *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
+ * Scheduling notation:
+ *	E	- either cluster
+ *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
+ *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
+ */
+
+#include <asm/export.h>
+/* Allow an exception for an insn; exit if we get one.  */
+#define EXI(x,y...)			\
+	99: x,##y;			\
+	.section __ex_table,"a";	\
+	.long 99b - .;			\
+	lda $31, $exitin-99b($31);	\
+	.previous
+
+#define EXO(x,y...)			\
+	99: x,##y;			\
+	.section __ex_table,"a";	\
+	.long 99b - .;			\
+	lda $31, $exitout-99b($31);	\
+	.previous
+
+	.set noat
+	.align 4
+	.globl __copy_user
+	.ent __copy_user
+				# Pipeline info: Slotting & Comments
+__copy_user:
+	.prologue 0
+	mov $18, $0		# .. .. .. E
+	subq $18, 32, $1	# .. .. E. ..	: Is this going to be a small copy?
+	nop			# .. E  .. ..
+	beq $18, $zerolength	# U  .. .. ..	: U L U L
+
+	and $16,7,$3		# .. .. .. E	: is leading dest misalignment
+	ble $1, $onebyteloop	# .. .. U  ..	: 1st branch : small amount of data
+	beq $3, $destaligned	# .. U  .. ..	: 2nd (one cycle fetcher stall)
+	subq $3, 8, $3		# E  .. .. ..	: L U U L : trip counter
+/*
+ * The fetcher stall also hides the 1 cycle cross-cluster stall for $3 (L --> U)
+ * This loop aligns the destination a byte at a time
+ * We know we have at least one trip through this loop
+ */
+$aligndest:
+	EXI( ldbu $1,0($17) )	# .. .. .. L	: Keep loads separate from stores
+	addq $16,1,$16		# .. .. E  ..	: Section 3.8 in the CWG
+	addq $3,1,$3		# .. E  .. ..	:
+	nop			# E  .. .. ..	: U L U L
+
+/*
+ * the -1 is to compensate for the inc($16) done in a previous quadpack
+ * which allows us zero dependencies within either quadpack in the loop
+ */
+	EXO( stb $1,-1($16) )	# .. .. .. L	:
+	addq $17,1,$17		# .. .. E  ..	: Section 3.8 in the CWG
+	subq $0,1,$0		# .. E  .. ..	:
+	bne $3, $aligndest	# U  .. .. ..	: U L U L
+
+/*
+ * If we fell through into here, we have a minimum of 33 - 7 bytes
+ * If we arrived via branch, we have a minimum of 32 bytes
+ */
+$destaligned:
+	and $17,7,$1		# .. .. .. E	: Check _current_ source alignment
+	bic $0,7,$4		# .. .. E  ..	: number bytes as a quadword loop
+	EXI( ldq_u $3,0($17) )	# .. L  .. ..	: Forward fetch for fallthrough code
+	beq $1,$quadaligned	# U  .. .. ..	: U L U L
+
+/*
+ * In the worst case, we've just executed an ldq_u here from 0($17)
+ * and we'll repeat it once if we take the branch
+ */
+
+/* Misaligned quadword loop - not unrolled.  Leave it that way. */
+$misquad:
+	EXI( ldq_u $2,8($17) )	# .. .. .. L	:
+	subq $4,8,$4		# .. .. E  ..	:
+	extql $3,$17,$3		# .. U  .. ..	:
+	extqh $2,$17,$1		# U  .. .. ..	: U U L L
+
+	bis $3,$1,$1		# .. .. .. E	:
+	EXO( stq $1,0($16) )	# .. .. L  ..	:
+	addq $17,8,$17		# .. E  .. ..	:
+	subq $0,8,$0		# E  .. .. ..	: U L L U
+
+	addq $16,8,$16		# .. .. .. E	:
+	bis $2,$2,$3		# .. .. E  ..	:
+	nop			# .. E  .. ..	:
+	bne $4,$misquad		# U  .. .. ..	: U L U L
+
+	nop			# .. .. .. E
+	nop			# .. .. E  ..
+	nop			# .. E  .. ..
+	beq $0,$zerolength	# U  .. .. ..	: U L U L
+
+/* We know we have at least one trip through the byte loop */
+	EXI ( ldbu $2,0($17) )	# .. .. .. L	: No loads in the same quad
+	addq $16,1,$16		# .. .. E  ..	: as the store (Section 3.8 in CWG)
+	nop			# .. E  .. ..	:
+	br $31, $dirtyentry	# L0 .. .. ..	: L U U L
+/* Do the trailing byte loop load, then hop into the store part of the loop */
+
+/*
+ * A minimum of (33 - 7) bytes to do a quad at a time.
+ * Based upon the usage context, it's worth the effort to unroll this loop
+ * $0 - number of bytes to be moved
+ * $4 - number of bytes to move as quadwords
+ * $16 is current destination address
+ * $17 is current source address
+ */
+$quadaligned:
+	subq	$4, 32, $2	# .. .. .. E	: do not unroll for small stuff
+	nop			# .. .. E  ..
+	nop			# .. E  .. ..
+	blt	$2, $onequad	# U  .. .. ..	: U L U L
+
+/*
+ * There is a significant assumption here that the source and destination
+ * addresses differ by more than 32 bytes.  In this particular case, a
+ * sparsity of registers further bounds this to be a minimum of 8 bytes.
+ * But if this isn't met, then the output result will be incorrect.
+ * Furthermore, due to a lack of available registers, we really can't
+ * unroll this to be an 8x loop (which would enable us to use the wh64
+ * instruction memory hint instruction).
+ */
+$unroll4:
+	EXI( ldq $1,0($17) )	# .. .. .. L
+	EXI( ldq $2,8($17) )	# .. .. L  ..
+	subq	$4,32,$4	# .. E  .. ..
+	nop			# E  .. .. ..	: U U L L
+
+	addq	$17,16,$17	# .. .. .. E
+	EXO( stq $1,0($16) )	# .. .. L  ..
+	EXO( stq $2,8($16) )	# .. L  .. ..
+	subq	$0,16,$0	# E  .. .. ..	: U L L U
+
+	addq	$16,16,$16	# .. .. .. E
+	EXI( ldq $1,0($17) )	# .. .. L  ..
+	EXI( ldq $2,8($17) )	# .. L  .. ..
+	subq	$4, 32, $3	# E  .. .. ..	: U U L L : is there enough for another trip?
+
+	EXO( stq $1,0($16) )	# .. .. .. L
+	EXO( stq $2,8($16) )	# .. .. L  ..
+	subq	$0,16,$0	# .. E  .. ..
+	addq	$17,16,$17	# E  .. .. ..	: U L L U
+
+	nop			# .. .. .. E
+	nop			# .. .. E  ..
+	addq	$16,16,$16	# .. E  .. ..
+	bgt	$3,$unroll4	# U  .. .. ..	: U L U L
+
+	nop
+	nop
+	nop
+	beq	$4, $noquads
+
+$onequad:
+	EXI( ldq $1,0($17) )
+	subq	$4,8,$4
+	addq	$17,8,$17
+	nop
+
+	EXO( stq $1,0($16) )
+	subq	$0,8,$0
+	addq	$16,8,$16
+	bne	$4,$onequad
+
+$noquads:
+	nop
+	nop
+	nop
+	beq $0,$zerolength
+
+/*
+ * For small copies (or the tail of a larger copy), do a very simple byte loop.
+ * There's no point in doing a lot of complex alignment calculations to try to
+ * to quadword stuff for a small amount of data.
+ *	$0 - remaining number of bytes left to copy
+ *	$16 - current dest addr
+ *	$17 - current source addr
+ */
+
+$onebyteloop:
+	EXI ( ldbu $2,0($17) )	# .. .. .. L	: No loads in the same quad
+	addq $16,1,$16		# .. .. E  ..	: as the store (Section 3.8 in CWG)
+	nop			# .. E  .. ..	:
+	nop			# E  .. .. ..	: U L U L
+
+$dirtyentry:
+/*
+ * the -1 is to compensate for the inc($16) done in a previous quadpack
+ * which allows us zero dependencies within either quadpack in the loop
+ */
+	EXO ( stb $2,-1($16) )	# .. .. .. L	:
+	addq $17,1,$17		# .. .. E  ..	: quadpack as the load
+	subq $0,1,$0		# .. E  .. ..	: change count _after_ copy
+	bgt $0,$onebyteloop	# U  .. .. ..	: U L U L
+
+$zerolength:
+$exitin:
+$exitout:			# Destination for exception recovery(?)
+	nop			# .. .. .. E
+	nop			# .. .. E  ..
+	nop			# .. E  .. ..
+	ret $31,($26),1		# L0 .. .. ..	: L U L U
+
+	.end __copy_user
+	EXPORT_SYMBOL(__copy_user)