Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 263 insertions, 0 deletions

diff --git a/arch/alpha/lib/ev6-divide.S b/arch/alpha/lib/ev6-divide.S
new file mode 100644
index 000000000..137ff1a07
--- /dev/null
+++ b/arch/alpha/lib/ev6-divide.S
@@ -0,0 +1,263 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/lib/ev6-divide.S
+ *
+ * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
+ *
+ * Alpha division..
+ */
+
+/*
+ * The alpha chip doesn't provide hardware division, so we have to do it
+ * by hand.  The compiler expects the functions
+ *
+ *	__divqu: 64-bit unsigned long divide
+ *	__remqu: 64-bit unsigned long remainder
+ *	__divqs/__remqs: signed 64-bit
+ *	__divlu/__remlu: unsigned 32-bit
+ *	__divls/__remls: signed 32-bit
+ *
+ * These are not normal C functions: instead of the normal
+ * calling sequence, these expect their arguments in registers
+ * $24 and $25, and return the result in $27. Register $28 may
+ * be clobbered (assembly temporary), anything else must be saved. 
+ *
+ * In short: painful.
+ *
+ * This is a rather simple bit-at-a-time algorithm: it's very good
+ * at dividing random 64-bit numbers, but the more usual case where
+ * the divisor is small is handled better by the DEC algorithm
+ * using lookup tables. This uses much less memory, though, and is
+ * nicer on the cache.. Besides, I don't know the copyright status
+ * of the DEC code.
+ */
+
+/*
+ * My temporaries:
+ *	$0 - current bit
+ *	$1 - shifted divisor
+ *	$2 - modulus/quotient
+ *
+ *	$23 - return address
+ *	$24 - dividend
+ *	$25 - divisor
+ *
+ *	$27 - quotient/modulus
+ *	$28 - compare status
+ *
+ * Much of the information about 21264 scheduling/coding comes from:
+ *	Compiler Writer's Guide for the Alpha 21264
+ *	abbreviated as 'CWG' in other comments here
+ *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
+ * Scheduling notation:
+ *	E	- either cluster
+ *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
+ *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
+ * Try not to change the actual algorithm if possible for consistency.
+ */
+
+#include <asm/export.h>
+#define halt .long 0
+
+/*
+ * Select function type and registers
+ */
+#define mask	$0
+#define divisor	$1
+#define compare $28
+#define tmp1	$3
+#define tmp2	$4
+
+#ifdef DIV
+#define DIV_ONLY(x,y...) x,##y
+#define MOD_ONLY(x,y...)
+#define func(x) __div##x
+#define modulus $2
+#define quotient $27
+#define GETSIGN(x) xor $24,$25,x
+#define STACK 48
+#else
+#define DIV_ONLY(x,y...)
+#define MOD_ONLY(x,y...) x,##y
+#define func(x) __rem##x
+#define modulus $27
+#define quotient $2
+#define GETSIGN(x) bis $24,$24,x
+#define STACK 32
+#endif
+
+/*
+ * For 32-bit operations, we need to extend to 64-bit
+ */
+#ifdef INTSIZE
+#define ufunction func(lu)
+#define sfunction func(l)
+#define LONGIFY(x) zapnot x,15,x
+#define SLONGIFY(x) addl x,0,x
+#else
+#define ufunction func(qu)
+#define sfunction func(q)
+#define LONGIFY(x)
+#define SLONGIFY(x)
+#endif
+
+.set noat
+.align	4
+.globl	ufunction
+.ent	ufunction
+ufunction:
+	subq	$30,STACK,$30		# E :
+	.frame	$30,STACK,$23
+	.prologue 0
+
+7:	stq	$1, 0($30)		# L :
+	bis	$25,$25,divisor		# E :
+	stq	$2, 8($30)		# L : L U L U
+
+	bis	$24,$24,modulus		# E :
+	stq	$0,16($30)		# L :
+	bis	$31,$31,quotient	# E :
+	LONGIFY(divisor)		# E : U L L U
+
+	stq	tmp1,24($30)		# L :
+	LONGIFY(modulus)		# E :
+	bis	$31,1,mask		# E :
+	DIV_ONLY(stq tmp2,32($30))	# L : L U U L
+
+	beq	divisor, 9f			/* div by zero */
+	/*
+	 * In spite of the DIV_ONLY being either a non-instruction
+	 * or an actual stq, the addition of the .align directive
+	 * below ensures that label 1 is going to be nicely aligned
+	 */
+
+	.align	4
+#ifdef INTSIZE
+	/*
+	 * shift divisor left, using 3-bit shifts for
+	 * 32-bit divides as we can't overflow. Three-bit
+	 * shifts will result in looping three times less
+	 * here, but can result in two loops more later.
+	 * Thus using a large shift isn't worth it (and
+	 * s8add pairs better than a sll..)
+	 */
+1:	cmpult	divisor,modulus,compare	# E :
+	s8addq	divisor,$31,divisor	# E :
+	s8addq	mask,$31,mask		# E :
+	bne	compare,1b		# U : U L U L
+#else
+1:	cmpult	divisor,modulus,compare	# E :
+	nop				# E :
+	nop				# E :
+	blt     divisor, 2f		# U : U L U L
+
+	addq	divisor,divisor,divisor	# E :
+	addq	mask,mask,mask		# E :
+	unop				# E :
+	bne	compare,1b		# U : U L U L
+#endif
+
+	/* ok, start to go right again.. */
+2:
+	/*
+	 * Keep things nicely bundled... use a nop instead of not
+	 * having an instruction for DIV_ONLY
+	 */
+#ifdef DIV
+	DIV_ONLY(addq quotient,mask,tmp2) # E :
+#else
+	nop				# E :
+#endif
+	srl	mask,1,mask		# U :
+	cmpule	divisor,modulus,compare	# E :
+	subq	modulus,divisor,tmp1	# E :
+
+#ifdef DIV
+	DIV_ONLY(cmovne compare,tmp2,quotient)	# E : Latency 2, extra map slot
+	nop				# E : as part of the cmovne
+	srl	divisor,1,divisor	# U :
+	nop				# E : L U L U
+
+	nop				# E :
+	cmovne	compare,tmp1,modulus	# E : Latency 2, extra map slot
+	nop				# E : as part of the cmovne
+	bne	mask,2b			# U : U L U L
+#else
+	srl	divisor,1,divisor	# U :
+	cmovne	compare,tmp1,modulus	# E : Latency 2, extra map slot
+	nop				# E : as part of the cmovne
+	bne	mask,2b			# U : U L L U
+#endif
+
+9:	ldq	$1, 0($30)		# L :
+	ldq	$2, 8($30)		# L :
+	nop				# E :
+	nop				# E : U U L L
+
+	ldq	$0,16($30)		# L :
+	ldq	tmp1,24($30)		# L :
+	nop				# E :
+	nop				# E :
+
+#ifdef DIV
+	DIV_ONLY(ldq tmp2,32($30))	# L :
+#else
+	nop				# E :
+#endif
+	addq	$30,STACK,$30		# E :
+	ret	$31,($23),1		# L0 : L U U L
+	.end	ufunction
+EXPORT_SYMBOL(ufunction)
+
+/*
+ * Uhh.. Ugly signed division. I'd rather not have it at all, but
+ * it's needed in some circumstances. There are different ways to
+ * handle this, really. This does:
+ * 	-a / b = a / -b = -(a / b)
+ *	-a % b = -(a % b)
+ *	a % -b = a % b
+ * which is probably not the best solution, but at least should
+ * have the property that (x/y)*y + (x%y) = x.
+ */
+.align 4
+.globl	sfunction
+.ent	sfunction
+sfunction:
+	subq	$30,STACK,$30		# E :
+	.frame	$30,STACK,$23
+	.prologue 0
+	bis	$24,$25,$28		# E :
+	SLONGIFY($28)			# E :
+	bge	$28,7b			# U :
+
+	stq	$24,0($30)		# L :
+	subq	$31,$24,$28		# E :
+	stq	$25,8($30)		# L :
+	nop				# E : U L U L
+
+	cmovlt	$24,$28,$24	/* abs($24) */ # E : Latency 2, extra map slot
+	nop				# E : as part of the cmov
+	stq	$23,16($30)		# L :
+	subq	$31,$25,$28		# E : U L U L
+
+	stq	tmp1,24($30)		# L :
+	cmovlt	$25,$28,$25	/* abs($25) */ # E : Latency 2, extra map slot
+	nop				# E :
+	bsr	$23,ufunction		# L0: L U L U
+
+	ldq	$24,0($30)		# L :
+	ldq	$25,8($30)		# L :
+	GETSIGN($28)			# E :
+	subq	$31,$27,tmp1		# E : U U L L
+
+	SLONGIFY($28)			# E :
+	ldq	$23,16($30)		# L :
+	cmovlt	$28,tmp1,$27		# E : Latency 2, extra map slot
+	nop				# E : U L L U : as part of the cmov
+
+	ldq	tmp1,24($30)		# L :
+	nop				# E : as part of the cmov
+	addq	$30,STACK,$30		# E :
+	ret	$31,($23),1		# L0 : L U U L
+	.end	sfunction
+EXPORT_SYMBOL(sfunction)