Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 250 insertions, 0 deletions

diff --git a/arch/alpha/lib/ev6-memcpy.S b/arch/alpha/lib/ev6-memcpy.S
new file mode 100644
index 000000000..ffbd056b6
--- /dev/null
+++ b/arch/alpha/lib/ev6-memcpy.S
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * arch/alpha/lib/ev6-memcpy.S
+ * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com>
+ *
+ * Reasonably optimized memcpy() routine for the Alpha 21264
+ *
+ *	- memory accessed as aligned quadwords only
+ *	- uses bcmpge to compare 8 bytes in parallel
+ *
+ * Much of the information about 21264 scheduling/coding comes from:
+ *	Compiler Writer's Guide for the Alpha 21264
+ *	abbreviated as 'CWG' in other comments here
+ *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
+ * Scheduling notation:
+ *	E	- either cluster
+ *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
+ *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
+ *
+ * Temp usage notes:
+ *	$1,$2,		- scratch
+ */
+#include <asm/export.h>
+	.set noreorder
+	.set noat
+
+	.align	4
+	.globl memcpy
+	.ent memcpy
+memcpy:
+	.frame $30,0,$26,0
+	.prologue 0
+
+	mov	$16, $0			# E : copy dest to return
+	ble	$18, $nomoredata	# U : done with the copy?
+	xor	$16, $17, $1		# E : are source and dest alignments the same?
+	and	$1, 7, $1		# E : are they the same mod 8?
+
+	bne	$1, $misaligned		# U : Nope - gotta do this the slow way
+	/* source and dest are same mod 8 address */
+	and	$16, 7, $1		# E : Are both 0mod8?
+	beq	$1, $both_0mod8		# U : Yes
+	nop				# E :
+
+	/*
+	 * source and dest are same misalignment.  move a byte at a time
+	 * until a 0mod8 alignment for both is reached.
+	 * At least one byte more to move
+	 */
+
+$head_align:
+	ldbu	$1, 0($17)		# L : grab a byte
+	subq	$18, 1, $18		# E : count--
+	addq	$17, 1, $17		# E : src++
+	stb	$1, 0($16)		# L :
+	addq	$16, 1, $16		# E : dest++
+	and	$16, 7, $1		# E : Are we at 0mod8 yet?
+	ble	$18, $nomoredata	# U : done with the copy?
+	bne	$1, $head_align		# U :
+
+$both_0mod8:
+	cmple	$18, 127, $1		# E : Can we unroll the loop?
+	bne	$1, $no_unroll		# U :
+	and	$16, 63, $1		# E : get mod64 alignment
+	beq	$1, $do_unroll		# U : no single quads to fiddle
+
+$single_head_quad:
+	ldq	$1, 0($17)		# L : get 8 bytes
+	subq	$18, 8, $18		# E : count -= 8
+	addq	$17, 8, $17		# E : src += 8
+	nop				# E :
+
+	stq	$1, 0($16)		# L : store
+	addq	$16, 8, $16		# E : dest += 8
+	and	$16, 63, $1		# E : get mod64 alignment
+	bne	$1, $single_head_quad	# U : still not fully aligned
+
+$do_unroll:
+	addq	$16, 64, $7		# E : Initial (+1 trip) wh64 address
+	cmple	$18, 127, $1		# E : Can we go through the unrolled loop?
+	bne	$1, $tail_quads		# U : Nope
+	nop				# E : 
+
+$unroll_body:
+	wh64	($7)			# L1 : memory subsystem hint: 64 bytes at
+					# ($7) are about to be over-written
+	ldq	$6, 0($17)		# L0 : bytes 0..7
+	nop				# E :
+	nop				# E :
+
+	ldq	$4, 8($17)		# L : bytes 8..15
+	ldq	$5, 16($17)		# L : bytes 16..23
+	addq	$7, 64, $7		# E : Update next wh64 address
+	nop				# E :
+
+	ldq	$3, 24($17)		# L : bytes 24..31
+	addq	$16, 64, $1		# E : fallback value for wh64
+	nop				# E :
+	nop				# E :
+
+	addq	$17, 32, $17		# E : src += 32 bytes
+	stq	$6, 0($16)		# L : bytes 0..7
+	nop				# E :
+	nop				# E :
+
+	stq	$4, 8($16)		# L : bytes 8..15
+	stq	$5, 16($16)		# L : bytes 16..23
+	subq	$18, 192, $2		# E : At least two more trips to go?
+	nop				# E :
+
+	stq	$3, 24($16)		# L : bytes 24..31
+	addq	$16, 32, $16		# E : dest += 32 bytes
+	nop				# E :
+	nop				# E :
+
+	ldq	$6, 0($17)		# L : bytes 0..7
+	ldq	$4, 8($17)		# L : bytes 8..15
+	cmovlt	$2, $1, $7		# E : Latency 2, extra map slot - Use
+					# fallback wh64 address if < 2 more trips
+	nop				# E :
+
+	ldq	$5, 16($17)		# L : bytes 16..23
+	ldq	$3, 24($17)		# L : bytes 24..31
+	addq	$16, 32, $16		# E : dest += 32
+	subq	$18, 64, $18		# E : count -= 64
+
+	addq	$17, 32, $17		# E : src += 32
+	stq	$6, -32($16)		# L : bytes 0..7
+	stq	$4, -24($16)		# L : bytes 8..15
+	cmple	$18, 63, $1		# E : At least one more trip?
+
+	stq	$5, -16($16)		# L : bytes 16..23
+	stq	$3, -8($16)		# L : bytes 24..31
+	nop				# E :
+	beq	$1, $unroll_body
+
+$tail_quads:
+$no_unroll:
+	.align 4
+	subq	$18, 8, $18		# E : At least a quad left?
+	blt	$18, $less_than_8	# U : Nope
+	nop				# E :
+	nop				# E :
+
+$move_a_quad:
+	ldq	$1, 0($17)		# L : fetch 8
+	subq	$18, 8, $18		# E : count -= 8
+	addq	$17, 8, $17		# E : src += 8
+	nop				# E :
+
+	stq	$1, 0($16)		# L : store 8
+	addq	$16, 8, $16		# E : dest += 8
+	bge	$18, $move_a_quad	# U :
+	nop				# E :
+
+$less_than_8:
+	.align 4
+	addq	$18, 8, $18		# E : add back for trailing bytes
+	ble	$18, $nomoredata	# U : All-done
+	nop				# E :
+	nop				# E :
+
+	/* Trailing bytes */
+$tail_bytes:
+	subq	$18, 1, $18		# E : count--
+	ldbu	$1, 0($17)		# L : fetch a byte
+	addq	$17, 1, $17		# E : src++
+	nop				# E :
+
+	stb	$1, 0($16)		# L : store a byte
+	addq	$16, 1, $16		# E : dest++
+	bgt	$18, $tail_bytes	# U : more to be done?
+	nop				# E :
+
+	/* branching to exit takes 3 extra cycles, so replicate exit here */
+	ret	$31, ($26), 1		# L0 :
+	nop				# E :
+	nop				# E :
+	nop				# E :
+
+$misaligned:
+	mov	$0, $4			# E : dest temp
+	and	$0, 7, $1		# E : dest alignment mod8
+	beq	$1, $dest_0mod8		# U : life doesnt totally suck
+	nop
+
+$aligndest:
+	ble	$18, $nomoredata	# U :
+	ldbu	$1, 0($17)		# L : fetch a byte
+	subq	$18, 1, $18		# E : count--
+	addq	$17, 1, $17		# E : src++
+
+	stb	$1, 0($4)		# L : store it
+	addq	$4, 1, $4		# E : dest++
+	and	$4, 7, $1		# E : dest 0mod8 yet?
+	bne	$1, $aligndest		# U : go until we are aligned.
+
+	/* Source has unknown alignment, but dest is known to be 0mod8 */
+$dest_0mod8:
+	subq	$18, 8, $18		# E : At least a quad left?
+	blt	$18, $misalign_tail	# U : Nope
+	ldq_u	$3, 0($17)		# L : seed (rotating load) of 8 bytes
+	nop				# E :
+
+$mis_quad:
+	ldq_u	$16, 8($17)		# L : Fetch next 8
+	extql	$3, $17, $3		# U : masking
+	extqh	$16, $17, $1		# U : masking
+	bis	$3, $1, $1		# E : merged bytes to store
+
+	subq	$18, 8, $18		# E : count -= 8
+	addq	$17, 8, $17		# E : src += 8
+	stq	$1, 0($4)		# L : store 8 (aligned)
+	mov	$16, $3			# E : "rotate" source data
+
+	addq	$4, 8, $4		# E : dest += 8
+	bge	$18, $mis_quad		# U : More quads to move
+	nop
+	nop
+
+$misalign_tail:
+	addq	$18, 8, $18		# E : account for tail stuff
+	ble	$18, $nomoredata	# U :
+	nop
+	nop
+
+$misalign_byte:
+	ldbu	$1, 0($17)		# L : fetch 1
+	subq	$18, 1, $18		# E : count--
+	addq	$17, 1, $17		# E : src++
+	nop				# E :
+
+	stb	$1, 0($4)		# L : store
+	addq	$4, 1, $4		# E : dest++
+	bgt	$18, $misalign_byte	# U : more to go?
+	nop
+
+
+$nomoredata:
+	ret	$31, ($26), 1		# L0 :
+	nop				# E :
+	nop				# E :
+	nop				# E :
+
+	.end memcpy
+	EXPORT_SYMBOL(memcpy)
+
+/* For backwards module compatibility.  */
+__memcpy = memcpy
+.globl __memcpy