Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 298 insertions, 0 deletions

diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
new file mode 100644
index 000000000..fcdd59d77
--- /dev/null
+++ b/arch/arc/include/asm/entry.h
@@ -0,0 +1,298 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_ARC_ENTRY_H
+#define __ASM_ARC_ENTRY_H
+
+#include <asm/unistd.h>		/* For NR_syscalls defination */
+#include <asm/arcregs.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>	/* For VMALLOC_START */
+#include <asm/mmu.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+#include <asm/entry-compact.h>	/* ISA specific bits */
+#else
+#include <asm/entry-arcv2.h>
+#endif
+
+/* Note on the LD/ST addr modes with addr reg wback
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+	st.a	\reg, [sp, -4]
+.endm
+
+.macro PUSHAX aux
+	lr	r9, [\aux]
+	PUSH	r9
+.endm
+
+.macro POP reg
+	ld.ab	\reg, [sp, 4]
+.endm
+
+.macro POPAX aux
+	POP	r9
+	sr	r9, [\aux]
+.endm
+
+/*--------------------------------------------------------------
+ * Helpers to save/restore Scratch Regs:
+ * used by Interrupt/Exception Prologue/Epilogue
+ *-------------------------------------------------------------*/
+.macro  SAVE_R0_TO_R12
+	PUSH	r0
+	PUSH	r1
+	PUSH	r2
+	PUSH	r3
+	PUSH	r4
+	PUSH	r5
+	PUSH	r6
+	PUSH	r7
+	PUSH	r8
+	PUSH	r9
+	PUSH	r10
+	PUSH	r11
+	PUSH	r12
+.endm
+
+.macro RESTORE_R12_TO_R0
+	POP	r12
+	POP	r11
+	POP	r10
+	POP	r9
+	POP	r8
+	POP	r7
+	POP	r6
+	POP	r5
+	POP	r4
+	POP	r3
+	POP	r2
+	POP	r1
+	POP	r0
+
+.endm
+
+/*--------------------------------------------------------------
+ * Helpers to save/restore callee-saved regs:
+ * used by several macros below
+ *-------------------------------------------------------------*/
+.macro SAVE_R13_TO_R24
+	PUSH	r13
+	PUSH	r14
+	PUSH	r15
+	PUSH	r16
+	PUSH	r17
+	PUSH	r18
+	PUSH	r19
+	PUSH	r20
+	PUSH	r21
+	PUSH	r22
+	PUSH	r23
+	PUSH	r24
+.endm
+
+.macro RESTORE_R24_TO_R13
+	POP	r24
+	POP	r23
+	POP	r22
+	POP	r21
+	POP	r20
+	POP	r19
+	POP	r18
+	POP	r17
+	POP	r16
+	POP	r15
+	POP	r14
+	POP	r13
+.endm
+
+/*--------------------------------------------------------------
+ * Collect User Mode callee regs as struct callee_regs - needed by
+ * fork/do_signal/unaligned-access-emulation.
+ * (By default only scratch regs are saved on entry to kernel)
+ *
+ * Special handling for r25 if used for caching Task Pointer.
+ * It would have been saved in task->thread.user_r25 already, but to keep
+ * the interface same it is copied into regular r25 placeholder in
+ * struct callee_regs.
+ *-------------------------------------------------------------*/
+.macro SAVE_CALLEE_SAVED_USER
+
+	mov	r12, sp		; save SP as ref to pt_regs
+	SAVE_R13_TO_R24
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	; Retrieve orig r25 and save it with rest of callee_regs
+	ld	r12, [r12, PT_user_r25]
+	PUSH	r12
+#else
+	PUSH	r25
+#endif
+
+.endm
+
+/*--------------------------------------------------------------
+ * Save kernel Mode callee regs at the time of Contect Switch.
+ *
+ * Special handling for r25 if used for caching Task Pointer.
+ * Kernel simply skips saving it since it will be loaded with
+ * incoming task pointer anyways
+ *-------------------------------------------------------------*/
+.macro SAVE_CALLEE_SAVED_KERNEL
+
+	SAVE_R13_TO_R24
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	sub     sp, sp, 4
+#else
+	PUSH	r25
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Opposite of SAVE_CALLEE_SAVED_KERNEL
+ *-------------------------------------------------------------*/
+.macro RESTORE_CALLEE_SAVED_KERNEL
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	add     sp, sp, 4  /* skip usual r25 placeholder */
+#else
+	POP	r25
+#endif
+	RESTORE_R24_TO_R13
+.endm
+
+/*--------------------------------------------------------------
+ * Opposite of SAVE_CALLEE_SAVED_USER
+ *
+ * ptrace tracer or unaligned-access fixup might have changed a user mode
+ * callee reg which is saved back to usual r25 storage location
+ *-------------------------------------------------------------*/
+.macro RESTORE_CALLEE_SAVED_USER
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	POP	r12
+#else
+	POP	r25
+#endif
+	RESTORE_R24_TO_R13
+
+	; SP is back to start of pt_regs
+#ifdef CONFIG_ARC_CURR_IN_REG
+	st	r12, [sp, PT_user_r25]
+#endif
+.endm
+
+/*--------------------------------------------------------------
+ * Super FAST Restore callee saved regs by simply re-adjusting SP
+ *-------------------------------------------------------------*/
+.macro DISCARD_CALLEE_SAVED_USER
+	add     sp, sp, SZ_CALLEE_REGS
+.endm
+
+/*-------------------------------------------------------------
+ * given a tsk struct, get to the base of it's kernel mode stack
+ * tsk->thread_info is really a PAGE, whose bottom hoists stack
+ * which grows upwards towards thread_info
+ *------------------------------------------------------------*/
+
+.macro GET_TSK_STACK_BASE tsk, out
+
+	/* Get task->thread_info (this is essentially start of a PAGE) */
+	ld  \out, [\tsk, TASK_THREAD_INFO]
+
+	/* Go to end of page where stack begins (grows upwards) */
+	add2 \out, \out, (THREAD_SIZE)/4
+
+.endm
+
+/*
+ * @reg [OUT] thread_info->flags of "current"
+ */
+.macro GET_CURR_THR_INFO_FLAGS  reg
+	GET_CURR_THR_INFO_FROM_SP  \reg
+	ld  \reg, [\reg, THREAD_INFO_FLAGS]
+.endm
+
+#ifdef CONFIG_SMP
+
+/*-------------------------------------------------
+ * Retrieve the current running task on this CPU
+ * 1. Determine curr CPU id.
+ * 2. Use it to index into _current_task[ ]
+ */
+.macro  GET_CURR_TASK_ON_CPU   reg
+	GET_CPU_ID  \reg
+	ld.as  \reg, [@_current_task, \reg]
+.endm
+
+/*-------------------------------------------------
+ * Save a new task as the "current" task on this CPU
+ * 1. Determine curr CPU id.
+ * 2. Use it to index into _current_task[ ]
+ *
+ * Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS)
+ * because ST r0, [r1, offset] can ONLY have s9 @offset
+ * while   LD can take s9 (4 byte insn) or LIMM (8 byte insn)
+ */
+
+.macro  SET_CURR_TASK_ON_CPU    tsk, tmp
+	GET_CPU_ID  \tmp
+	add2 \tmp, @_current_task, \tmp
+	st   \tsk, [\tmp]
+#ifdef CONFIG_ARC_CURR_IN_REG
+	mov r25, \tsk
+#endif
+
+.endm
+
+
+#else   /* Uniprocessor implementation of macros */
+
+.macro  GET_CURR_TASK_ON_CPU    reg
+	ld  \reg, [@_current_task]
+.endm
+
+.macro  SET_CURR_TASK_ON_CPU    tsk, tmp
+	st  \tsk, [@_current_task]
+#ifdef CONFIG_ARC_CURR_IN_REG
+	mov r25, \tsk
+#endif
+.endm
+
+#endif /* SMP / UNI */
+
+/* ------------------------------------------------------------------
+ * Get the ptr to some field of Current Task at @off in task struct
+ *  -Uses r25 for Current task ptr if that is enabled
+ */
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+
+.macro GET_CURR_TASK_FIELD_PTR  off,  reg
+	add \reg, r25, \off
+.endm
+
+#else
+
+.macro GET_CURR_TASK_FIELD_PTR  off,  reg
+	GET_CURR_TASK_ON_CPU  \reg
+	add \reg, \reg, \off
+.endm
+
+#endif	/* CONFIG_ARC_CURR_IN_REG */
+
+#endif  /* __ASM_ARC_ENTRY_H */