Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1661 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
new file mode 100644
index 000000000..04f98d1db
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -0,0 +1,1661 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+			valid-sources = <0xffffffff>;
+			copro-sw-interrupts = <1>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <13>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2500-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2500-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
+				p2a: p2a-control@2c {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4 0x150 0x8>;
+				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_CRT1>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <0x19>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2500-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_XDMA>;
+				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2500-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2500-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x200>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 232>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+				status = "disabled";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2500-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785000 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785020 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt3: watchdog@1e785040 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785040 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				status = "disabled";
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2500-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgpm_default: sgpm_default {
+		function = "SGPM";
+		groups = "SGPM";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USB2AD";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};