Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 745 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000..2d53c47d7
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-3_3v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					status = "okay";
+				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_can0_default: can0_default {
+					pinmux = <PIN_PC10__CANTX0>,
+						 <PIN_PC11__CANRX0>;
+					bias-disable;
+				};
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_pfets: classd_default_pfets {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB3__CLASSD_R2>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_rstn {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
+			};
+
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};